1. Qualification requirements and approximate salary range of directors' representatives.

Electrical engineer, in fact, should be in charge, anyway, for more than 2000 months.

Ⅱ. What are the regulations of the Ministry of Construction on the positions of site director representatives and professional supervision engineers?

Responsibilities of directors' representatives

Qualifications:

With the consent of the legal representative of the engineering supervision unit, the chief supervision engineer is authorized in writing to exercise some duties and powers on behalf of the chief supervision engineer who has registered engineering qualifications or has intermediate or above professional technical titles, more than 3 years of engineering practice experience and obtained the qualification certificate of provincial supervision engineer.

Job responsibilities:

The chief supervision engineer specified above shall not entrust the supervision representative to perform other duties.

Responsibilities of professional supervision engineer

Qualifications:

Authorized by the chief supervision engineer, he is responsible for the supervision of a certain profession or a certain post, has the right to issue corresponding supervision documents, has the professional qualification of engineering registration or has the professional technical title above the intermediate level, has 2 years or above engineering practice experience and has obtained the qualification certificate of provincial supervision engineer.

Job description:

If there is no professional supervision engineer, the chief supervision engineer shall bear this responsibility, and the projects that can be entrusted can also be entrusted to the representative of the director in accordance with the regulations.

Job responsibilities:

1. Responsible for compiling the detailed rules for the implementation of professional supervision.

2. Responsible for the specific implementation of professional supervision.

3. Organize, guide, inspect and supervise the work of supervisors in this discipline, and make suggestions to the chief supervision engineer when the personnel need to be adjusted.

4. Review the plans, schemes, applications and changes related to this major submitted by the contractor, and report to the chief supervision engineer.

(2) Guangxi Chief Engineer's Representative Conditions Extended Reading: Job Responsibilities

1. The safety supervisor is the main executor of the daily supervision of project safety production, and performs the duties of project safety production supervision on behalf of the chief supervision engineer in the process of project engineering supervision.

2. Safety supervisors should conscientiously implement the Regulations on the Administration of Safety Production in Construction Projects, implement the principles and policies, laws and regulations, norms and standards of labor protection and safety production, and do a good job in publicity, education and supervision of safety production.

3. The safety supervisor has the right to participate in the review of construction organization design (scheme) and safety technical measures plan, and supervise and inspect the implementation.

4. The safety supervisor should do a good job in daily safety patrol inspection and grasp the safety production trends.

5. The safety supervisor shall participate in the safety inspection activities under supervision and keep records of safety activities.

6. The safety supervisor has the right to check the related certificates of the construction personnel and stop the related certificates of the special type of work personnel.

7. The safety supervisor has the right to stop illegal command and illegal operation in the process of supervision; Have the right to require the construction unit to carry out rectification when potential safety accidents are found, and report to the chief supervision engineer in time; If the situation is serious, the construction unit shall be required to temporarily stop the construction and report to the chief supervision engineer immediately.

8. The safety supervisor shall supervise and inspect the implementation of the safety rectification notice of the construction unit. Have the right to check the contents of the rectification notice reply form, and have the right to request further rectification if it does not meet the rectification requirements, and report the verification to the director.

Ⅲ. What are the registration requirements for the general supervision engineer exam?

Conditions for taking the general (four subjects) examination Any citizen of People's Republic of China (PRC) who is healthy, law-abiding and meets one of the following conditions may apply for taking the qualification examination for supervision engineer.

1. College degree or above, major in engineering technology or engineering economics. In accordance with the relevant provisions of the state, he has obtained the intermediate title of engineering technology or engineering economy and has served for 3 years.

2, in accordance with the relevant provisions of the state, to obtain senior positions in engineering technology or engineering economy.

3. 1970 (including 70 years) graduated from technical secondary school majoring in engineering technology or engineering economy, obtained the intermediate title of engineering technology or engineering economy in accordance with relevant state regulations, and served for three years.

(3) Extended reading of Guangxi Chief Engineer's Representative Conditions:

Precautions:

Remember to bring the most important ID card and mobile phone. Basically, every province needs a health code. Without a mobile phone, you may not be able to enter the examination room.

Note that the mobile phone must not be brought into the examination room after showing the health code, and it must be placed in a unified place.

Candidates are only allowed to use black ink pen, 2B pencil, eraser and calculator without text editing function to take the exam. Try not to bring other items unrelated to the exam into the examination room.

Ⅳ The representative of the chief supervision engineer shall be a person with more than several years of similar engineering supervision experience.

According to GB/T50319-2013, a person with more than three years of similar engineering supervision experience and corresponding qualifications can be the representative of the chief supervision engineer.

Ⅳ What are the requirements for the representative of the civil engineering director?

Basic knowledge of safety, etc. Now, as a civil engineering supervisor, in addition to professional knowledge, we must also learn supervision norms and data regulations. Supervision work is complicated, so you should not only be proficient in this major, but also know other related knowledge to avoid being laughed at by the construction unit. Of course, knowledge is accumulated step by step. As long as you work hard, you will be a good civil engineering supervision engineer. If you help workers, you can only be a supervisor Of course, you can also become a civil engineering supervision engineer if you strive to obtain the qualification of an engineer (college degree or above).

If you are an assistant, you should have just graduated.

Personally, I suggest that you can choose dry construction.

If you must be a supervisor, you must master more professional knowledge and slowly take the registration certificate.

Not as strict as upstairs. You can be a special supervisor with a certificate, and the minimum is a junior title. The supervisor has the right to sign and should know something about the information. Then there is what an ordinary supervisor should have. Also have good coordination ability, because many things need to be coordinated. If we can establish a good relationship with the construction unit, the supervision work will be easier to do.

ⅵ What certificates do you need to be a chief supervision engineer?

A, the chief supervision engineer must meet one of the following conditions, can mount guard:

1, qualified as a supervision engineer and registered, with more than three years of relevant engineering supervision experience;

2. College degree or above in related major, more than 20 years of relevant engineering construction management experience, received supervision business training, and approved by the provincial construction administrative department.

Second, the chief supervision engineer shall perform the following main duties:

1, set up a project supervision organization, determine the post responsibilities of personnel, and be fully responsible for the daily work of the project supervision organization;

2, presided over the preparation of supervision planning, examination and approval of supervision implementation rules and supervision work plan;

3. Issue the application form for project commencement or resumption of work, project shutdown order, project payment certificate, project completion inspection sheet, etc.

4, review the construction organization design, technical scheme and schedule submitted by the construction unit;

5. Review and sign the application, payment certificate and completion settlement of the construction unit;

6, review and deal with engineering changes;

7. Mediation of contract disputes between the construction unit and the construction unit, settlement of claims and approval of project extension;

8. Review the qualifications of construction subcontractors;

9, presided over the supervision work meeting, issued by the project supervision agency documents and instructions;

10, presiding over or participating in the investigation of engineering quality accidents;

1 1, organize the preparation and release of monthly supervision report, supervision work stage report, special report, project quality evaluation report and supervision work summary;

12, review and sign the engineering quality inspection data of divisions and units, review the application for completion, organize the pre-acceptance of completion, and participate in the completion acceptance;

13, presided over the arrangement of project supervision data;

14, when major construction quality and safety problems are found, corresponding measures should be taken to coordinate with relevant parties and press

Timely report the relevant provisions to the construction unit and the construction administrative department.

Three, the chief supervision engineer has the following powers:

1. When the project meets the conditions for commencement or resumption of work, a commencement order or resumption of work order shall be issued with the consent of the construction unit;

2, when found in the process of construction engineering quality problems or unsafe operation and other violations, should be ordered to

The construction unit makes rectification until the project shutdown order is issued;

3, review the qualification of construction units and subcontractors;

4, review the construction organization design, technical scheme and schedule of the construction unit;

5. Review and confirm the project payment and project settlement;

6. It is suggested to replace the unqualified project leader or unqualified construction subcontractor of the construction unit.

ⅶ How to distinguish and what conditions are available for being a chief supervision engineer, a representative of the director, a professional supervision engineer and a supervisor?

First of all, the chief supervision engineer, the director's representative and the professional supervision engineer must be the supervision engineer first. The chief supervision engineer shall be authorized in writing by the legal representative of the supervision unit; With the consent of the legal representative of the supervision unit, the director's representative shall be authorized in writing by the chief supervision engineer; The professional supervision engineer is responsible for the work according to the division of responsibilities of the project supervision post and the instructions of the chief supervision engineer; Supervisors are supervisors who have been trained in supervision business, have similar engineering-related professional knowledge and are engaged in specific supervision work. But it is not clear what conditions these should have, depending on personal ability.

Ⅷ What conditions can make a chief supervision engineer?

The general supervision engineer and professional supervision engineer have the same qualifications, and must have a registered supervision engineer post certificate (practice).

The difference is that the chief supervision engineer in some areas must be registered in the whole country, not in the province;

The professional supervision engineer only cares about a single major, and the chief supervision engineer manages the overall work of the supervision project department;

The chief supervision engineer has strong experience and ability of "four pipes, two controls and one coordination" and is entrusted by the supervision enterprise.

Ren he. Therefore, the chief supervision engineer is a position in the enterprise.

9. Does the director's representative need the certificate of registered supervision engineer?

You don't need it.

The chief supervision engineer's representative refers to:

With the consent of the legal representative of the engineering supervision unit, the chief supervision engineer is authorized in writing to exercise some duties and powers on behalf of the chief supervision engineer, and has the qualification of engineering registration or the professional technical title above the intermediate level, more than 3 years of engineering practice experience and the personnel trained by the supervision business.

Therefore, the representative of the chief supervision engineer may not need the certificate of registered supervision engineer.

The representative of the chief supervision engineer shall perform the following duties:

1, responsible for the supervision work designated or assigned by the chief supervision engineer;

2, according to the authorization of the chief supervision engineer, exercise part of the duties and rights of the chief supervision engineer;

3, to assist the chief supervision engineer to select and determine the project department responsible personnel, and determine their tasks and functions;

4. Assist the chief supervision engineer to preside over the supervision work meeting;

5, participate in the preparation of supervision planning, check the detailed rules for the implementation of various professional project supervision;

6, review the contractor's qualification, and put forward the review opinions;

7. Assist the chief supervision engineer to preside over or participate in the investigation of engineering quality accidents;

8. Review the construction organization design and schedule submitted by the contractor;

9, review and deal with engineering changes;

10, review and sign the project quality of divisions, disciplines and units, check the inspection and evaluation data and the contractor's application for completion, and participate in the completion acceptance of the project;

1 1, patrol the site regularly or irregularly, find and put forward problems in time and deal with them;

12, organize the preparation of monthly supervision report, supervision work stage report, special report and project supervision work summary;

13, assist the chief supervision engineer to sort out the supervision data of the project;

14, report the supervision work to our company regularly or irregularly;

15, seriously implement the company's instructions, resolutions and owner's instructions within the scope stipulated in the supervision contract.

(9) Extended reading of Guangxi Chief Engineer's Representative Conditions:

Supervision engineer refers to the engineering construction supervision personnel who have passed the national unified examination, obtained the qualification certificate of supervision engineer and registered.

The supervision engineer supervises the project quality on behalf of the owner and is the bridge between the owner and the contractor. It not only requires practitioners to understand engineering knowledge and cost accounting, but also requires them to be very clear about building regulations.

Chief supervision engineer refers to the supervision engineer authorized by the legal representative of the supervision unit in writing, who is fully responsible for the performance of the entrusted supervision contract and presides over the work of the project supervision institution. In addition, supervisors also include professional supervision engineers and supervisors, but in the whole process of information system engineering construction, the role of chief supervision engineer is very important for supervision quality.

X. What responsibilities should the chief supervision engineer perform? Under what circumstances, there should be a representative of the director.

Responsibilities of Chief Engineer and Director's Representative

(a) the chief supervision engineer's responsibilities:

1 Determine the division of labor and post responsibilities of the personnel of the project supervision agency;

2. Preside over the preparation of project supervision planning, examine and approve the detailed rules for the implementation of project supervision, and be responsible for managing the daily work of project supervision institutions;

3. Review the qualifications of subcontractors and put forward review opinions;

4 check and supervise the work of supervisors, and equip supervisors according to the progress of the project. Incompetent supervisors should change jobs;

5. Preside over the supervision work meeting and issue the documents and instructions of the project supervision organization;

6. Examine and approve the commencement report, construction organization design, technical scheme and schedule submitted by the contractor;

7 review and sign the contractor's application, payment certificate and completion settlement;

8 review and handle engineering changes;

9. Preside over or participate in the investigation of engineering quality accidents;

10 contract dispute mediation, claim settlement, project delay approval between the construction unit and the contractor;

1 1 Organize to compile and publish monthly supervision report, supervision work stage report, special report and project supervision work summary;

12 review and sign the quality inspection and evaluation data of divisional and unit projects, review the contractor's application for completion, organize the supervisor to conduct quality inspection on the project to be accepted, and participate in the completion acceptance of the project;

13 presided over sorting out the project supervision data.

(2) The responsibilities of the representative of the chief supervision engineer:

1 Responsible for the supervision work designated or assigned by the chief supervision engineer;

2. According to the authorization of the chief supervision engineer, exercise some responsibilities and powers of the chief supervision engineer.

(three) the chief supervision engineer shall not entrust the following work to the representative of the chief supervision engineer:

1 Presided over the preparation of the project supervision plan and examined and approved the detailed rules for the implementation of the project supervision;

2. Issue the application form for project commencement/resumption, project shutdown order, project payment certificate and project completion inspection sheet;

3. Review and sign the completion settlement;

4. Mediation of contract disputes between the construction unit and the contractor, settlement of claims, and approval of project extension;

5 according to the progress of the project, the deployment of supervisors and the replacement of incompetent supervisors.

I hope it helps you.