Power safety experience 1

On August 3, xxx, a safety accident occurred in our carbon plant. In the assembly workshop, when Xiang and others cooperated to remove the anode guide rod, they found that the equipment failure was not reported and the operation was illegal, which led to the fracture of Xiang's right thigh. There are many reasons for this accident, such as unreliable catenary clock, uneven stress on guide rod and internal injury of anode steel claw. These are all objective. There are also some subjective reasons: standing on the equipment with weak safety awareness, working illegally, the chain car did not stop working after the control failed, and the employees did not know enough about the danger of disassembling the anode steel claw in the non-disassembly position. After the accident, the synthetic carbon plant and the company's safety and environmental protection department analyzed the cause of the accident in detail for many times, imposed serious economic penalties on the person responsible for the accident, and conducted a safety education for the employees.

As a monitor, I realize that the lesson of this accident is profound. The accident not only caused losses to the enterprise, but also brought economic losses to the responsible person and related personnel, and also caused irreparable mental pain to the individual. After thinking about it, I feel the importance of safety more and have a deep understanding of how to further do a good job in safety.

1. Improve safety quality and prevent accidents. The main source of this accident is that the operator lost his consciousness of the possible foresight and consequences of the accident at a critical moment, which is commonly called safety fluke psychology. Therefore, in order to grasp safety production, we must pay special attention to the education and improvement of people's safety culture quality and safety thought and behavior.

Second, improve the safety awareness of employees in many ways. Safety work has only a starting point and no end point. All employees should teach each other, learn from each other, learn from each other's strengths and improve together. To form a good habit of paying attention to safety, operators should also be diligent in five aspects on the premise of knowing three things and four things. Only in this way can production safety be better guaranteed.

Third, establish the concept that safety is benefit. At present, the company is vigorously carrying out activities to reduce costs and increase efficiency. As a front-line employee, doing a good job in safety production is the best way to reduce costs and increase efficiency. At work, we should not only master various operating procedures skillfully, but also develop good safe operating habits, put an end to habitual violations, and dare to be serious with unsafe behaviors around us. Every employee should supervise each other in their daily work, remind each other and eliminate potential safety hazards in time.

As long as everyone attaches importance to safety, always pays attention to safety, puts safety in mind and eliminates any anxiety about safety work, the company's safety work will certainly be better.

Power safety experience II

First of all, reflect on why a series of major safety accidents have occurred in our company:

First, the person in charge of the work, staff and safety responsibilities are not clear, and on-site supervision is not in place. Operators lack basic safety skills and preventive skills, so they can't identify the hazards in their work. Facts have proved that if the dangerous point is not predicted, prevented and controlled, it may turn into a major accident under certain conditions, and the consequences are unimaginable.

Second, the problems exposed through the analysis of several accidents: illegal operation, ideological paralysis, irresponsible barbaric construction behavior, 1. Let's talk about illegal operation first: the serious violation of regulations by operators is the main cause of accidents. The illegal phenomena such as not checking electricity and hanging wrong grounding wires are all blind construction without safety measures and barbaric construction without technical measures to ensure safety, which is inevitable for accidents. 2. Mental paralysis: there is no meaning of safety precautions, just want to save trouble, plan quickly, be afraid of trouble, and be lucky. This is the inevitability of the accident. 3. Irresponsibility: the system is not perfect, the management is not in place, it is not strict, it cannot be implemented, the execution is poor, the safety management is a mere formality, there are rules and regulations that are not observed, the work is impetuous, the operators do not follow the requirements, and the control measures for dangerous points are weak.

Third, the on-site supervision and inspection are not implemented in place, and the inspection is a mere formality. During the inspection, only good news is reported, but no worries are reported. Usually, the equipment management is not in place and the defects are not eliminated in time. In order to save trouble, tools and instruments are used in a small area and a large area during construction, and the equipment is overloaded, aging and not updated in time, and the daily inspection is not serious, resulting in unsafe factors and accidents.

It happened, the inspection was not carried out in place, the sense of responsibility was not strong, the employees' awareness of self-protection was poor, they did not pay attention to safety, the working procedures were unclear, and they did not seriously hold the pre-shift and post-shift meetings. Safety accidents are not only "unsafe behaviors of people" but also "unsafe conditions of things", which should be paid attention to from small aspects in construction, because some small aspects may lead to personal injury or death accidents. In recent years, such accidents have occurred frequently in our company.

Through reflection, I put forward some immature suggestions for leaders to consider:

First, in the future work of production safety, we should always pay attention to some road sections to avoid some accidents of "small river ditch capsizing" and "repeating the same mistakes".

Second, combined with the production work mode, analyze the dangerous points where accidents may occur, so that construction personnel can understand the accident process, and understand the relationship between accidents from the aspects of professional skills, operating procedures and ideology, so as to improve the safety awareness and safety management level of employees.

Three, before the construction, must be clear about the work place, topography, landforms and other related situations, the dangerous points of the work, the matters that should be paid attention to in the work task and scope, and the safety measures, so as to ensure that every staff member clearly understands.

Fourth, it is necessary to clarify their respective work tasks, work objectives, work scope and jobs, safety measures and technical measures taken by staff, dangerous points and precautions in work, and work procedures. Only in this way can the accident be effectively controlled.

I believe that as long as we learn from the accident, constantly improve ourselves and raise our awareness of safety precautions, our safety management will certainly be improved.

Power safety experience 3

Through the study of Meeting Minutes, I mainly have the following experiences:

1, safe production is not a slogan.

Safety in production is an epigram that we electric workers can hear or see all the time. But this is not only a slogan, but also the first criterion of our work and the only measure to ensure our personal safety. We can't ignore the danger of the future because of the previous safety. Forgetting this rule is to send yourself into the cage of an "electric tiger" with ingredients. This is also the main reason for the "Bengbu 5. 12" accident. Such an attitude is not surprising.

2, obey the command, obey the scheduling

Without all kinds of safety measures, the danger of electric power work is far greater than war. Because not everyone will die in the war, and if there is no guarantee of safety production measures in power production, no one can escape the clutches of the "electric tiger". Without strategic planning and flexible command and coordination of all arms and units, the war will fail. The same is true for electric power work. If there is no safety production measures as a weapon, if there is no strict command, it is very likely to cause self-injury, accidental injury, and even mass casualties, and at the same time cause immeasurable economic losses. No less than losing a war. Therefore, electric power work should be as disciplined and well-directed as the army. "Bengbu No.5 Middle School. The "12" accident was badly organized, loosely managed and the scene was chaotic. So how can we not lose the battle?

3. The laws are not complied with and the law enforcement is lax.

With the promulgation of the Law on Safety in Production, safety in production has risen to the height of law. Yes, if you don't abide by the safety production guidelines personally, the consequences may be harm to others. This is "homicide"! It may also cause national economic losses, which is the crime of endangering national security! Even if there are no serious consequences, you have committed the crime of dereliction of duty. If the safety measures in our work, such as "two votes and three systems", are not strictly observed by the staff, but go through the formalities, that is, "the law is not complied with and the law enforcement is not strict." It is a threat to personal safety and state property, and it is a crime. In the "Bengbu 5. 12" accident, the working ticket was "signed" and "unsigned", and the system of work interruption and signature handover was not strictly implemented, that is, the compliance with the safety production guarantee system was not raised to the level of legal compliance.

Power safety experience 4

As the saying goes, "It's not too late to mend." In my opinion, this sentence is not suitable for our electric power department! We don't want to "make up for it", but "prepare for a rainy day"! Nip in the bud and nip all unsafe factors in the bud!

Because this accident happened to a new person in the inspection class, and I am also a novice who has just stepped into the inspection work, I feel extremely sad and sorry for this accident! If I want to talk about my feelings about the cause of this accident from the perspective of a newcomer to the inspection, and recall my previous work, plus this accident, I think there are two misunderstandings in our work: First, as a newcomer who has just joined the work, I still don't understand a lot of knowledge, but sometimes I am embarrassed to ask the old worker master because of my face. Second, on the other hand, because they have just joined the work, all parties are eager to show themselves and get everyone's recognition, but they are afraid of being accused, thinking that they are joking and being looked down upon by others. So no matter what work, as long as it is assigned by the masters, we will work hard and try our best to finish it as quickly as possible. Sometimes, I don't even wait for others to speak or say hello. I think only in this way can I show my positive work and vision.

In the face of painful accident lessons, I deeply realized how important it is for a new worker to be down-to-earth and diligent! In the work, we should actively carry forward the spirit of Confucius' "not ashamed to ask questions" and "three people must have a teacher" and be diligent in learning and consulting all aspects of working knowledge; Moreover, before taking part in some work, you should actively communicate with the master, especially when working on high-voltage equipment, you should ask the live parts and personally check whether the switch and breaker are in the open state. Remember that "face is small, work is big!" ""low speed, high completion! " "Anyway, safety first! " .

Through careful reflection on the accident, combined with the usual work, from the perspective of a newcomer, I have some immature suggestions:

First, because everyone has their own way of working, in order to adapt to the inspection work better and faster, can we arrange a relatively fixed partner for the newcomers who have just joined the work? In this way, newcomers can adapt to the working style of this fixed partner as soon as possible, and avoid misunderstanding and mutual distrust in information transmission and acceptance caused by unfamiliarity at work. Old masters take young apprentices, and this "one-on-one" working mode can also enable old masters to impart their work experience to newcomers better and more completely.

Second, can we find some teachers to train us regularly, so that we can have a more systematic and scientific understanding of the inspection work. In particular, give lectures on safety knowledge to new employees, increase safety knowledge and strengthen self-protection awareness.

Third, go to other places with good working methods and work experience from time to time to learn from each other. "Develop and strengthen yourself through continuous communication and learning.

Fourth, consolidate and improve our standardized operations and coordinate mutually beneficial cooperation between operation and maintenance. "Without rules, there would be no Fiona Fang." Only by doing a good job seriously can we ensure that the work is foolproof.

Power safety experience 5

20xx65438+1October 65438+July, aerial work in Datang Xutang Power Plant failed to fasten the safety belt as required, causing personal injury and death.

This is a personal accident caused by a serious violation of regulations, and the lessons of blood and tears are once again before us. Safety in production is an epigram that we electric workers can hear or see all the time. But this is not only a slogan, but also the first criterion of our work and the only measure to ensure our personal safety. We can't ignore the danger of the future because of the previous safety. Forgetting this rule is extremely irresponsible to yourself, and it is strange that nothing happens.

Without all kinds of safety measures, the danger of electric power work is far greater than war. Because not everyone will die in the war, and no one can escape the danger without the guarantee of safety production measures in power production. Without strategic planning, flexible command and coordination among various services and arms, the war will fail. The same is true for electric power work. If there is no safety production measures as a weapon, if there is no strict command, it is very likely to cause self-injury, accidental injury, and even mass casualties, and at the same time cause immeasurable economic losses. No less than losing a war. Therefore, electric power work should be as disciplined and well-directed as the army.

With the promulgation of the Law on Safety in Production, safety in production has risen to the height of law. Yes, if you don't abide by the safety production guidelines personally, the consequences may be harm to others. This is "homicide"! It may also cause national economic losses, which is the crime of endangering national security! Even if there are no serious consequences, you have committed the crime of dereliction of duty. If the safety measures in our work, such as "two votes and three systems", are not strictly observed by the staff, but go through the formalities, that is, "the law is not complied with and the law enforcement is not strict." It is a threat to personal safety and state property, and it is a crime.

In order to learn the lessons from the accident in Xutang Power Plant and learn the spirit of meeting minutes, we should strictly demand ourselves in the future, earnestly abide by various safety guarantee systems, perform safety production duties, earnestly abide by safety guarantee measures such as "two votes and three systems", never be careless, and cherish the precious lives of ourselves and others for the sake of family happiness and career prosperity.

Safety, I don't know how you understand the meaning of this word, but I know how important safety is to an electric worker. Power safety involves thousands of households in all walks of life, and safety work must not be taken lightly. It concerns not only our personal safety, but also the safety of others. Electric workers are diligent and dedicated. In order to ensure the safety of electricity use and standardize the electricity market, we electric workers pay more and get less. If we don't pay attention to safety and always keep it in mind, then the lives of our workers will be threatened.

Power safety experience 6

Safety, I don't know how you understand the meaning of this word, but I know how important safety is to an electric worker. Power safety involves thousands of households in all walks of life, and safety work must not be taken lightly. It concerns not only our personal safety, but also the safety of others. Power workers are a hard-working and dedicated team, which is my greatest feeling since I engaged in power work. In order to ensure the safety of electricity use and standardize the electricity market, we electric workers pay more and get less. If we don't pay attention to safety and always keep it in mind, then the lives of our workers will be threatened, because everyone knows that "fire and water are ruthless", but if we are careless about safety, electricity will be like a killer. What I want to say more is that workers working in the front line of production have great responsibilities. Each of us is related to the happiness of a family. Our safety affects the hearts of mothers, children and even happy families! I sincerely hope that every electric worker should be careful at work, protect himself for himself, his family and his children, and put an end to all tragedies. Before work, he must make a good analysis of "three measures and one point", never violate the rules, and truly "go to work happily and go home safely", because the safety responsibility is more important than Mount Tai.

June is the national safety production activity month, which shows the importance of safety. Safety in production is an important content of building a well-off society in an all-round way and an inherent requirement of practicing Theory of Three Represents. Vigorously advocate safety culture, improve the safety awareness of all staff, strengthen the publicity and education of safety production, and create a good safety production environment atmosphere. Starting from establishing the "people-oriented" safety concept, laws, regulations and power knowledge of safety production are publicized through news media such as radio and television, so as to achieve the purpose of encouraging, educating, improving, restraining and motivating people, and further improve the awareness of all employees on safety production prevention. "Personal safety" means that all employees should pay attention to safety in life, study and work, and don't hurt others, themselves or others. In particular, every electric power worker is required to raise safety awareness, strictly enforce safety production laws and regulations, ensure the safety of electric power equipment and electric power workers, and accurately grasp the key points in electric power safety production management. Safety production managers should always bear in mind that "safety is more important than Mount Tai", establish a sense of urgency of "being prepared for danger in times of peace" and raise safety to a political height.

"The Xiongguan road is really like iron, and now it is a leap from the beginning." In recent years, although power safety production has gradually entered a virtuous circle track. However, the reality of safe production reminds us that there are still many shortcomings and loopholes in the management of safe production, and every electric worker can't sit back and relax and must constantly improve. The electric power industry is a sunrise-filled enterprise, and the electric power enterprises are fearless of difficulties, United and cooperative, selfless and innovative. We will build the Great Wall of Steel to ensure the safe operation of the power grid with practical actions, practice Theory of Three Represents in ordinary jobs, sing the main theme of safety and create a better tomorrow for Evergreen Company.