Article 1 In order to strengthen labor protection in station production, improve working conditions, protect the safety and health of employees in the production process, and ensure smooth transportation, these regulations are formulated according to the company's safety production rules and regulations and combined with the actual situation of the station.

Article 2 The principle of "safety first, prevention first" and the stationmaster's responsibility system must be implemented in the work of station safety production. Team safety officers must adhere to the principle of "safety must be controlled in production", and production must obey the needs of safety, realize safe production and ensure smooth transportation.

Article 3 Teams and individuals who have made outstanding contributions to safety production shall be rewarded, and those responsible for accidents caused by violation of the safety production system and operating rules shall be severely dealt with. Those who violate the criminal law shall be handed over to judicial organs for punishment.

Two. Institutions and responsibilities

Article 4 The station safety work leading group (hereinafter referred to as the safety leading group) is the organization and leading body of the station safety management, and consists of the stationmaster and the team leader. The main responsibilities are: to be fully responsible for the management of station safety production, to study and formulate technical measures and labor protection plans for safety production, to carry out safety production inspection and supervision, and to investigate and handle accidents. The daily affairs of the safety leading group shall be handled by the safety officer.

Article 5 the safety officer is responsible for the safety education of the employees in this team, explaining and organizing the study of safety production rules and operating procedures. Implement safety production supervision and inspection, implement various safety instructions of the company and the safety leading group, and ensure safety production.

Article 6 Division of responsibilities for safety production: the stationmaster is the first responsible person for safety production in this station, and the safety officers of each team are the main responsible persons for safety production in this unit.

Article 7 each team must do a good job in production safety within their respective work scope.

Eighth station safety work leading group leader responsibilities:

1. Effectively implement labor protection law and company safety system, and comprehensively manage daily work safety.

2. Summarize and review the plan of safety production measures, and supervise the implementation of each team in the station according to regulations.

3. Formulate and revise safety production management systems, and supervise and inspect the implementation of these systems.

4. Organize safety inspection. Often go deep into the field to guide the labor protection work in production. In case of particularly urgent unsafe conditions, have the right to order to stop production, and immediately report to the leaders in charge of research and handling.

5. Summarize and popularize the advanced experience of safety production, and do a good job in publicity and education of safety production and professional training.

6. Participate in the team's safety assessment for employees, and conduct safety assessment for team leaders on a regular basis.

7. Participate in the investigation and handling of accidents, be responsible for the statistics, analysis and reporting of casualty accidents, assist relevant departments to put forward measures to prevent accidents, and urge them to be realized on time.

8. According to the relevant regulations of the company and the actual work needs, purchase the labor protection articles of the unit, formulate the distribution and use standards, and supervise the implementation.

9. Incorporate safety production into the scope of station performance appraisal and link it with performance pay, and strictly supervise the implementation.

10. Give instructions from superiors and grass-roots information, and give feedback.

Article 9 The safety officers of each team shall assist the stationmaster to implement the labor protection laws and regulations and the safety production management system, and handle the daily production affairs and safety production inspection and supervision of the safety team.

Article 10 In the switch station and the operation rooms at both ends, the safety officer should always check and urge the team members to abide by the safety production system and operation procedures. Do a good job in safety inspection and maintenance of equipment and tools. Responsible for reporting the safety production situation of the team to the webmaster at the monthly meeting. Do a good job in the registration and custody of all production equipment.

Eleventh employees should seriously study and implement the safety technology operating rules in their work and abide by various rules and regulations. Take good care of production equipment and safety protection devices, facilities and labor protection articles. If unsafe conditions are found, report to the team leader in time and eliminate them quickly.

Three. Safety education and training

Article 12 New employees or interns must go through three aspects of safety education (namely, general standards of personal safety, post safety standards, station lines and equipment) before entering the post for study. For workers who change jobs, they also need three kinds of education before they can take up their posts.

Article 13. Employees who are engaged in duty, shunting, shunting, etc. in the front line must study and take exams on post and personal safety standards every month, and the exam results must reach the lowest score of the safety exam of the station safety leading group before they can continue to take up their posts, otherwise the safety leading group has the right to suspend their work and conduct training. All on-the-job personnel in the station must be regularly publicized and educated on safety standards.

Four. Equipment and working environment

Article 14 All kinds of driving equipment, station equipment and instruments shall not be overloaded or run with diseases. Old equipment that does not meet the safety requirements shall be used correctly, maintained and overhauled regularly, and an application for renewal or transformation shall be made to the superior in a planned way.

Fifteenth electrical equipment and wiring should comply with the relevant national safety regulations. Electrical equipment should have fusible insurance and leakage protection, good insulation, and reliable grounding or zero protection measures. Electrical equipment must meet the safety technical requirements of the corresponding protection level.

Sixteenth workplace layout should be reasonable, keep clean and tidy. Protective measures must be taken for toxic and harmful operations.

Seventeenth in case of high temperature, cold, humidity, lightning and other dangerous working environments, corresponding effective protective measures must be taken.

Verb (abbreviation of verb) Prevention and treatment of personal protective equipment and occupational hazards

Eighteenth according to the nature of work and labor laws and regulations, provide or distribute personal protective equipment to employees. Safety personnel of each team must educate employees to use protective equipment correctly. Those who don't know the purpose and performance of protective equipment are not allowed to work at their posts.

Article 19 heatstroke prevention should be carried out in summer, cold prevention should be carried out in winter, health examination should be carried out regularly, the working environment should be continuously improved, and health protection articles should be distributed according to regulations to improve the health level of shift workers.

Twentieth actively organize employees to participate in the company's occupational physical examination. Employees diagnosed with occupational diseases should immediately report to the company's personnel department, and the personnel department or the company's safety Committee should adjust their posts according to the situation and make a decision on treatment or recuperation in time.

Twenty-first it is forbidden to arrange female workers to engage in operations that affect the health of the fetus and baby during pregnancy and lactation.

Six, inspection and rectification

Twenty-second adhere to the regular or irregular production safety inspection system. The inspection of the station safety work leading group shall be no less than twice a month; The inspection organized by each group shall be conducted at least once a week; Each team should implement the inspection system before and after work; When changing shifts every day, check the commonly used communication equipment and station equipment.

Twenty-third found unsafe hidden dangers, must be timely rectification. If the team can't carry out rectification, or it doesn't have the conditions for rectification alone, it should immediately report to the safety leading group and make unified arrangements for rectification.

Seven. Reward and punishment

Twenty-fourth station safety production work should be summarized once a month. On the basis of the summary, the safety leading group will organize the selection of advanced teams and individuals for safety production.

Twenty-fifth basic conditions for advanced teams in production safety:

1. Earnestly implement the policy of "safety first, prevention first", implement the laws and regulations on safety production at higher levels, implement the team leader responsibility system, and strengthen safety production management;

2. The implementation of safety production management measures can effectively carry out the work;

3. Strictly implement various safety production rules and regulations, carry out regular safety production education activities, constantly enhance employees' safety awareness and improve their self-protection ability;

4. Strengthen production safety inspection, timely rectify hidden dangers and hazards of accidents, and actively improve working conditions;

Twenty-sixth advanced personal conditions for safe production:

1. Abide by safety production rules and regulations, operating rules and labor discipline to ensure production safety;

2. Actively learn the knowledge of safety production, and constantly improve safety awareness and self-protection ability;

3. Resolutely oppose violations of safety production regulations, correct and stop illegal operations and illegal orders.

Twenty-seventh to make special contributions to production safety, give special rewards.

Article 28 Traffic accidents and personal safety accidents occurring in the course of work shall be handled by the safety leading group in accordance with the Regulations and various accident handling regulations of the company, and those who violate the criminal law shall be handed over to the judicial department for handling.

Twenty-ninth teams can formulate an existing system that is more in line with the current situation of the team according to the management system of this site, but it must be within the framework of this system and may not arbitrarily modify the contents stipulated in this system.

Thirtieth the provisions by the station safety work leading group is responsible for the interpretation of. These Provisions shall be implemented as of the date of promulgation. Where the relevant systems and regulations previously formulated by the station are in conflict with these Provisions, these Provisions shall prevail.