First, no barefoot or wearing slippers, high heels, skirts to work. People with long hair should wear working hats;

Second, smoking is prohibited at work;

Third, concentrate on your work, and don't joke or play;

Four, the use of all machine tools and electrical equipment, must abide by its safe operation procedures, and take good care of the use;

Five, work must wear labor insurance supplies in accordance with the provisions, are not allowed to work with bare arms;

Six, it is strictly prohibited to start all motor vehicles without a license;

Seven, it is strictly prohibited to drive a vehicle that does not meet the requirements of the driver's license;

Eight, without the approval of the leadership, the operator shall not casually use machine tools and equipment;

Nine, workplaces, vehicles, workstations, channels should always be kept clean and tidy, so as to achieve civilized production;

Ten, it is forbidden to all low ignition point oil, gas, alcohol contact lighting facilities and live lines.

Automobile maintenance completion inspection system

First, check according to the contents of the maintenance agreement contract;

Two, check whether the technical performance of the repair project meets the technical standards;

Third, the appearance inspection should be intact and clean;

Four, vehicle appearance inspection and trial operation;

Five, after the road test to fill in the test technology card file;

Six, according to the maintenance agreement and technical standards to users.

Automobile electrician safety operating system

First, when loading and unloading automobile generators and starters, turn off the main switch of automobile power supply and cut off the power supply. If the main power switch is not installed, the removed wire connector should be bandaged;

Second, when you need to check the starter circuit, you should pay attention to whether there are other people working under the car, say hello in advance, brake with your hand, put it in neutral, and then start. Unskilled personnel and students are not allowed to start casually;

Third, the automobile line connector must be firmly connected and wrapped with tape. The perforation line should be wrapped with rubber;

Four, when replacing the battery, there should be a battery climbing belt;

Five, found that the battery rack is damaged, should immediately repair, shall not be used;

Six, when loading the battery, the bottom should be padded with rubber, and the battery should be blocked with wooden boards;

Seven, battery head, clamp should be reliable, no wire substitute;

Eight, preparation of electro-hydraulic, sulfuric acid should be gently added to the distillation, while constantly stirring with a glass rod, in order to achieve the purpose of rapid heat dissipation. It is forbidden to inject water into sulfuric acid. Personnel should wear rubber shoes, rubber gloves and protective glasses.

Nine, battery maintenance, assembly room should have good ventilation equipment and fire prevention equipment to prevent lead poisoning and fire. The air in the rechargeable battery workshop should be circulated, and fireworks are strictly prohibited indoors and within 4 meters of the battery.

Ten, earnestly implement the new installation and the first charge of the battery after overhaul. The quality of initial charging directly affects the life of the battery. After the initial charging, the battery should be discharged at least once at a discharge rate equivalent to the battery capacity110 until the voltage of the single battery drops to1.7V. At this time, the initial charging rate is sufficient and it can be used after 24 hours.

11. Open the battery cover when charging, and the electro-hydraulic temperature shall not exceed 450 c.

Twelve, battery application discharge fork measurement, can't use pliers or other metal test, in case of explosion.

Thirteen, at work, if accidentally have electro-hydraulic fall on the skin or clothes, should immediately scrub with 5% soda water, and then rinse with water.

Fourteen, cleaning generators, starters and other electrical equipment should use industrial gasoline without additives, and pay attention to fire prevention.

Safety governance regulations

1. The department head and the production team leader are the first responsible persons for the safety of the department?

The Human Resources Examination Network provides you with the latest preparation materials for the most dynamic Human Resources Manager Examination (zui4 quan2).

2. All employees must keep in mind the concepts of "production must be safe" and "safety is the greatest benefit". Always tighten the string of safe production; Put an end to three violations; Unsafe, decisive not to produce?

3, the mechanic strictly implement safety technology operating rules and maintenance process specifications; And keep a detailed record of the workers? Special types of work must be certified?

4. Before using mobile appliances, oxyacetylene gas, lifting equipment and parking stool; Need routine inspection; Never be careless; Be lucky; Otherwise, it is negligence; Lifelong regret?

HR platform, the most professional human resource management website in China; Provide professional information on human resources?

5. Strengthen the collection system of industrial gasoline; When using inflammable and explosive materials, look around; No access after tomorrow; Set up obvious signs when necessary; Safe use?

6, lounge, tool cabinets are strictly prohibited to store accessories, gasoline; 20 dollars per discovery?

7, must use the car (bi4xu1shi3yong4ge1che1) stool to put the car; When parking; The supporting parts are correct and reliable; When using a double-column elevator; 20cm from the ground to check whether it is stable; Ensure safety and reliability?

8, in case of heavy vehicle repair; Decline politely or repair after unloading; Don't make trouble without restraint?

Is the human resources forum a platform for human resources workers to download HR toolbox and exchange human resources?

9, in the process of work; Don't play with each other; Beware of hurting yourself or being hurt by others?

10, the licensed personnel shall not drive indiscriminately; One-time exemption for private automatic use of customers' vehicles 100 USD; Penalty for driving a private car 100 yuan; Be responsible for the accident; Unlicensed people are not allowed to drive?

1 1, members of the safety leading group must patrol the production site frequently; Be predictable; Timely discover hidden dangers of accidents; Correct the signs of the accident? Employee safety education must be conducted once a month; Conduct a comprehensive inspection of mobile devices; Lifting equipment; Provide oxyacetylene gas and fire fighting equipment for the whole site every month. And make rectification records; Hold regular safety leading group meetings every month; And make inspection records of the meeting work? Job responsibilities of garage personnel

12, the material sales department and the finance department should do a good job of anti-theft; Idle people are not allowed to enter the finance room or warehouse?