OHSAS 18000 Basic Knowledge Simulation Test.

20 17 OHSAS 18000 basic knowledge simulation test questions

1. Multiple choice questions (each question 1 point, total 15 points):

1. Which workplaces does occupational health and safety refer to? ( )

A. Inside the organization B. Workplace of the organization C. Production place of the organization D. Boiler room of the organization

2.cctv? Lucky 52? In the column? Treasure chest? The interactive session is a quiz game, and the rules of the game are as follows: among the 20 trademark cards, the back of 5 trademark cards is marked with a certain bonus amount, and the back of other trademark cards is sad face. If you become a crying face, you won't get the prize. The audience participating in this game has three flop opportunities (the turned cards can't be turned over again), and a certain audience has won some prizes in the first two flops, so the probability of winning the third flop is (.

1a。 4 b. 15 c. 6 d. 20

3. What is the boundary between high voltage and low voltage of electrical equipment? ( )

A. 100000 volts b.5000V volts c. 500 volts d. 1000 volts

Welcome to Angola for sightseeing. If you are lucky, you can find diamonds. If you are unlucky, you will step on mines. The meaning of this advertisement is: ()

A. Daiyu is trying to promote tourism in countries where the civil war has not yet ended. Angola is a country rich in diamonds.

C. Angola is at war. Angola is a tourist destination.

5.GB/T280010-2001standard aims at: ()

A. Safety of products B. Safety of services C. Occupational health and safety D. Safety of surrounding residents

6. The occupational health and safety policy is approved by ().

A. employee representatives B. management representatives C. managers D. top managers

7. The reciprocal of-1is ()

a.-3 b. 1

three

c.- 1

three

? /P & gt；

d.3

8. The organization of occupational health and safety management system should follow the law ()

A. People's Republic of China (PRC) Cleaner Production Law B. People's Republic of China (PRC) Labor Law

C. People's Republic of China (PRC) Metrology Law and People's Republic of China (PRC) Contract Law

9. In what way should the risk assessed by the organization be controlled ()

A. objectives, operation control, emergency preparedness and response B. factory level, workshop level and team level.

C. National, local and industrial D. Prevention, treatment and reform

10. The organization shall ensure that personnel with occupational health and safety awareness include (a) relevant parties of the organization; B) the senior management of the enterprise; C) All personnel in all relevant functions and levels; D) personnel of all shifts.

1 1. The requirements for organizing the review of relevant emergency response procedures include (a) B. Irregular if necessary C. Regular D. Regular if necessary.

12. For the following related cases, the correct explanation is as follows: (a) Cooking fast in pressure cooker is based on the principle that the pressure increases and the boiling point rises; (2) Fast cooking in pressure cooker is based on the principle that atmospheric pressure decreases with the increase of height; (c) The purpose of refrigerating vegetables that are not eaten for the time being is to reduce the temperature of liquid and accelerate evaporation; (d) Put vegetables that are not eaten for the time being in a sunny and ventilated place.

13. According to the Catalogue of Highly Toxic Substances issued by the Ministry of Health, benzene belongs to ().

A. Highly toxic substances B. Toxic substances C. Low toxic substances D. Non-toxic substances

14. The occupational diseases in China are divided into ().

A. 10 1 15 b . 9 2 15 c . 15 15d . 10 2 15。

15. Who provides various resources of the occupational health and safety management system? ( )

A. general manager B. director of logistics department C. manager D. employee representative

II. True or false questions (each question 1 point, a total of 15 points):

1. Any luck, paralysis, laziness, bravado, recklessness, impatience, irritability, anger, complacency and curiosity may become a security risk. ( )

2. The allowable risk is the risk that most employees of the organization can accept. ( )

3. The scope of internal audit should include the contents of management review. ( )

4. Unacceptable risks can be ignored when setting occupational health and safety objectives. ( )

5.？ 4.5. 1 Performance measurement and monitoring? Not only refers to the calibration measurement of instruments. ( )

6. The supplier's occupational health and safety behavior is not within this scope and can be ignored. ( )

7. Risks that have been well managed can no longer be controlled. ( )

8. Continuous improvement must be reflected in all aspects of the organization ()

9. Hazard identification includes two parts: identifying the existence of hazards and determining their characteristics. ( )

10. The goal is the goal that occupational health and safety must achieve. ( )

1 1. Occupational health and safety objectives and indicators must be quantified. ( )

12. The establishment of occupational health and safety management system enables organizations to control occupational health and safety risks and improve their performance. ( )

Article 4.4.6 d in 13). Standards require organizations to take safety performance as an important input when designing products.

( )

14. Every employee of the organization must know the management representative and the employee representative. ( )

15. The records of the occupational health and safety management system shall be complete and traceable. ( )

Three, multiple-choice questions (2 points per question, a total of 20 points):

1. Oxygen is prohibited to be transported with which of the following substances? ( )

A. argon B. oil C. acetylene D. nitrogen

2. The occupational health and safety policy should be ()

A. regularly review B. communicate to all employees C. obtain D. announce to the public as the relevant owner.

3. What education should new employees receive before taking up their posts? ( )

A. The teacher pays the apprentice B. Team level C. Factory level D. Workshop level

4. Which of the following factors should be considered in hazard identification? ( )

A. Regular and unconventional activities B. All personnel entering the workplace C. All facilities in the workplace

D. the general manager's intention

5. Management review reviews the organization's occupational health and safety management system ().

A. Suitability B. Adequacy C. Effectiveness D. Compliance

6. Belong to the special operations are ()

A. electric welding B. automobile driver C. lifting machinery D. blasting operation

7. The hazard source is caused by injury or disease, property loss, damage to the working environment or a combination of these situations ().

A. root b noun c state d verb

8. Which of the following aspects should be considered for the ability of personnel who may affect occupational health and safety in the workplace?

( )

A. Training B. Performance C. Education D. Work experience

9. Blue in the safety color indicates that it conforms to ().

A. instruction B. prohibition C. attention D. must

10. the performance of the occupational health and safety initiative includes (a) monitoring of accidents, diseases and incidents; b) compliance with operating instructions; c) compliance with applicable laws and regulations; d) investigation of accidents.

Four, fill in the blanks (each question 1 point, a total of 10 points):

1. Performance monitoring and measurement includes passive performance measurement.

2. The principle of safe production is safety first.

3. The height above the datum level is climbing operation.

4. The occupational health and safety management system shall obtain the latest version of relevant documents.

5. Farmers spread out the rice to dry, which increases the liquid content, which is beneficial to the evaporation of water in the rice.

6. One of the purposes of internal audit is to evaluate the operation of the occupational health and safety management system.

7. The occupational health and safety policy shall include the commitment and guarantee to abide by laws and regulations.

8. The function of leakage protector is mainly to provide indirect contact protection for people with fatal danger.

9. The organization shall obtain applicable laws and regulations and other occupational health and safety requirements.

10.LEC method is a common organization method.

Verb (abbreviation of verb) short answer questions (5 points for each question, 20 points in total):

1. Description? Three at once? Meaning of.

2. What is safe voltage? What are the grades of safe voltage in China?

3. What should be considered when setting occupational health and safety objectives?

4. Briefly describe what elements are included in the three-level monitoring in the occupational health and safety management system?

5. What are the requirements related to laws and regulations in the occupational health and safety management system?

Case analysis and elaboration of intransitive verbs (5 points for each question, 20 points in total):

1. Give an example of clause 4.5.2 in GB/T2800 1-200 1 standard? Measures taken to eliminate the actual and potential causes of nonconformity

Any corrective or preventive measures should be commensurate with the seriousness of the problem and the occupational health and safety risks faced. ? the meaning of

2. Please describe the main contents of Article 40 of the Law of People's Republic of China (PRC) on Work Safety.

3. The ideological and moral construction of minors has attracted more and more attention from the society. In order to guide students to establish a correct concept of consumption, a youth research institute randomly investigated the amount of pocket money (the amount is integer yuan) of 0/00 students in a school during the winter vacation. According to the survey data, make a frequency distribution table and a frequency distribution histogram (as shown below).

Packet frequency

0.5~50.5 0. 1

50.5~200.2

100.5~ 150.5

200.5300.3

200.5~250.5 100. 1

250.5~300.550.05

Total 100

frequency

class interval

Washington D.C.

0.5 50.5 A 200.5 B 250.5 300.5 Yuan (RMB)