Current location - Education and Training Encyclopedia - Educational Knowledge - 2022 Inner Mongolia Construction Engineering Vocational and Technical School Admissions Guide Telephone official website Public or Private?
2022 Inner Mongolia Construction Engineering Vocational and Technical School Admissions Guide Telephone official website Public or Private?
What major should junior high school graduates study? This is a question that many students are asking. In fact, this question is difficult to answer, because everyone's hobbies and abilities are different. But you can choose your major according to your own situation. If you have high confidence in your abilities and interests, you can choose to apply for science majors.

Inner Mongolia Construction Engineering Vocational Technology school profile: Inner Mongolia Construction Engineering Vocational Technology School was founded in 2006. It is a secondary vocational and technical school approved by the Education Department of the autonomous region, and it is also the earliest educational institution in our region to carry out full-time medium and long-term vocational skills training. The school is located in the campus of Inner Mongolia Normal University, with elegant environment, convenient transportation and rich cultural atmosphere.

What are the majors of Inner Mongolia Construction Engineering Vocational and Technical School? No. Professional Name Category 1 Subgrade and Pavement Engineering 2 Road Materials 3 Road Survey and Design 4 Road Engineering Survey 5 Computer Foundation 6 Road Engineering Drawing Inner Mongolia Construction Engineering Vocational and Technical School Professional Description: Road Materials

Some people say that the major of road materials is a "weak" discipline of architecture, but in fact, the major of road materials is a basic discipline of architecture. Students majoring in road materials need to master the basic knowledge and skills of architecture in order to become qualified architects.

Guided by the market, the Engineering Center judges the development trend and demand of new road materials industry, and carries out the engineering and system integration of major scientific and technological achievements with important application value around four directions: high-performance new road materials, environment-friendly new road materials, functional new road materials and intelligent construction, management and maintenance.

Based on the principle of "openness, competition and cooperation", the Engineering Center sets up open topics, encourages innovation, condenses and cultivates scientific and technological talents, and supports research projects related to the main research direction of the Engineering Center at present. The application guide for open topics in 2022 is now published as follows:

I. Research direction

The open project of the engineering center should closely focus on the key research direction of the engineering center, and focus on encouraging the research and development of new materials, the analysis of material action mechanism, and the development of test evaluation methods. At the same time, we should pay attention to the development of road construction and maintenance technology and test and detection technology, and the research content should be innovative.

According to the research direction and objectives of the Engineering Center, the open project in 2022 will focus on supporting the following research directions, and the topics can be customized:

Research direction 1: research and development of new road materials, focusing on but not limited to:

(1) High-performance road materials (anti-rutting materials, long-life pavement, etc. ); (2) Environmental-friendly road materials (such as high-value utilization technology of solid waste, normal temperature asphalt mixture, etc.). ); (3) Functional road materials (such as pavement self-repair technology, pavement rapid repair technology, etc. ).

Research direction 2: Research and development of intelligent technologies for road construction, management and maintenance, with emphasis on but not limited to:

(1) Construction and analysis of experimental test database; (2) Image processing technology of road materials; (3) Pavement health monitoring and data processing technology.

Research direction 3: develop testing and detection technology, focusing on but not limited to:

(1) Development of new test methods for asphalt and asphalt mixture; (2) Fast and lightweight pavement detection technology.

Professional Name: Subgrade and Pavement Engineering

The major of subgrade and pavement engineering is an important major to train senior professionals with the ability of subgrade and pavement construction. Students in this major should not only master basic construction knowledge and skills, but also have strong practical construction ability. In practice, students can master the methods and techniques of subgrade and pavement construction, as well as the use and maintenance of related equipment.

1, preparation before construction. In order to improve the construction quality, before the highway subgrade construction, we should make good preparations for the subgrade construction, including the measurement of foundation and the setting out of reference points.

2. deal with the website. After the preparatory work before construction is completed, the construction process of the next working procedure will be inspected. As long as the factors affecting the progress of the project are cleaned up, only in this way can the normal construction of the project be guaranteed and the quality loss be reduced as much as possible. Temporary drainage in construction is a common treatment method for highway subgrade. It uses side ditches dug on both sides of the project scope to draw out useless water by drainage method. Most of the side ditches are designed to be trapezoidal, so that water can flow into the lower places well, and then the useless wastewater is led out by manual methods. After field sampling, based on the relevant values measured in the test, until the water content of the project reaches the optimal water control and maximum dry density.

3. Treatment of the substrate. The treatment of foundation directly affects the stability of embankment. After the concrete paving work is completed, it should be compacted. Under the condition of not affecting the water content of the soil layer, the soil layer can be placed outdoors for a period of time by crushing or drying until its performance in all aspects reaches the construction standard, thus further ensuring the construction quality. In addition, according to the different roads, different rollers must be used, such as bulldozers, graders, light rollers, heavy rollers and so on.

Professional Name: Road Engineering Drawing

The major of road engineering drawing is to train senior professionals with certain engineering drawing ability. This paper mainly studies how to use engineering drawing software to carry out three-dimensional modeling, three-dimensional design and three-dimensional drawing of road engineering, which can be competent for the later work of road engineering drawing.

Core courses: road engineering drawing, engineering mechanics, soil mechanics and foundation, hydraulics and hydrology, road building materials, engineering geology, road engineering, road and bridge engineering measurement and pricing, road and bridge engineering construction technology and construction organization, road building materials, road survey technology, road maintenance and management, road and bridge engineering bidding and contract management, post operation training, course design, engineering practice, etc.

Employment direction: I am specialized in highway transportation department, engaged in technical and management work such as survey, design, detection, maintenance and repair of highways, urban roads, bridges and tunnels. Graduates are oriented to enterprises and institutions related to highway traffic construction, municipal engineering construction and railway engineering construction, and are mainly engaged in professional and technical management work such as road and bridge engineering survey and design, construction management, test and detection, engineering supervision, cost consultation and maintenance management.

Professional Name: Highway Engineering Survey

Highway engineering survey is a branch of architectural engineering, which is mainly responsible for highway engineering survey. Students in this major need to have strong knowledge of mathematics and physics, as well as certain measurement techniques and drawing skills. Students majoring in highway engineering survey can choose to engage in highway engineering survey, design and supervision.

Highway Engineering Survey of Inner Mongolia Construction Engineering Vocational and Technical School

Examples of continuing study majors: higher vocational education: highway transportation and management undergraduate course: transportation.

Corresponding occupations: automobile transportation dispatcher, automobile passenger service attendant, automobile freight station attendant, expressway toll collector and monitor, logistics clerk.

Professional code: 082900

Professional Name: Computer Basis

Computer basic major is a branch of computer science and technology major, which mainly studies the basic principle and composition of computer system, as well as the design, development and application of computer system. Students in this major should not only master basic computer knowledge and skills, but also have strong analytical, design and experimental abilities.

This course is a compulsory public basic course for non-computer majors in our school. The purpose of the course is to enable students to understand the basic concepts and contents of computer science and technology, understand the application of computers as tools in related fields, and master the basic operation of computers. After completing this course, students should have the following skills: first, the basic operation of computers; The second is the use of office automation software; Third, use multimedia information (sound, image) processing tools; The fourth is the basic application of computer network (such as information publishing, file transmission, information retrieval, mail service, information security, etc.). ).

The task of this course is to introduce the following contents: computer overview, computer system, Windows operating system, the use of office software, multimedia technology foundation, computer network and information security.

What about the teachers in Inner Mongolia Construction Engineering Vocational and Technical School? Teachers. There are fully functional training rooms for 3D printing, drone operation, computer animation and game making, architectural performance, preschool education, etc. The school has a strong faculty and diverse employment channels.

Inner Mongolia Construction Engineering Vocational and Technical School Inner Mongolia Construction Engineering Vocational and Technical School Address: Wulanbulang West Road, Gaiying Village, North, National Road1/KLOC-0, New Town, Hohhot, Inner Mongolia Autonomous Region

Official website of Inner Mongolia Construction Engineering Vocational and Technical School: www.nmgjg.com

Is Inner Mongolia Construction Engineering Vocational and Technical School public or private? A: Business.

If you have any questions about applying for technical secondary school/technical school/vocational school, you can click on 2023 RTVU's secondary school enrollment consultation (formerly RTVU): /xlzz/