Current location - Education and Training Encyclopedia - Educational Knowledge - Where is the public training base of Fuzhou vocational education?
Where is the public training base of Fuzhou vocational education?
1. Bidding conditions

The survey and design (re-tendering) of fuzhou polytechnic Phase II Project (Fuzhou Vocational Education Public Training Base Project) has been approved by Fuzhou Development and Reform Commission with the Reply of Fuzhou Development and Reform Commission on the Feasibility Study Report of fuzhou polytechnic Phase II Project (including Fuzhou Vocational Education Public Training Base Project) (Rongfa Reform Society [2009] No.75), which is a key project of the city. The clients and users of this project are fuzhou polytechnic (fuzhou polytechnic Phase II Project) and Fuzhou Vocational and Technical Education Center (Fuzhou Vocational Education Public Training Base Project). The construction funds are solved by the municipal finance, land transfer, bank loans and other channels. The entrusted agent and the tenderee are Fuzhou Planning and Design Institute, and the entrusted tendering agent is Fujian Bidding Center Co., Ltd. The project has met the bidding conditions, and the survey and design of this project is now subject to public bidding.

2. Project overview

2. 1. Project name: survey and design of fuzhou polytechnic Phase II Project (Fuzhou Vocational Education Public Training Base Project) (re-tendering);

2.2. Construction site: Zhuangnan Village and Qiaorong Village, Shang Jie Town, Minhou County, Fuzhou City;

2.3. Project construction scale: The total investment of this project is 365.77 million yuan (including Area A), with a total construction area of 109 134 square meters (including Area A), of which the construction area of fuzhou polytechnic Phase II project is 72,304 square meters, with an investment of 215.8 million yuan; Fuzhou Vocational Education Public Training Base has a construction area of 36,830 square meters and an investment of149.97 million yuan.

2.4. Total investment: 265.438 billion yuan. Among them, the project cost limit: the investment of fuzhou polytechnic Phase II project is10.34 billion yuan; Fuzhou vocational education public training base project investment of 85 million yuan;

2.5. Bidding type: detailed survey and conceptual design bidding;

2.6. Bidding scope and content: The scope includes: survey, scheme design, preliminary design and construction drawing design of professional projects such as building installation project, outdoor supporting project, decoration project, greening landscape project, bridge project, intelligent building project and fire control facilities project. The contents include: general plan, main design of each single building (including steel structure and glass curtain wall), outdoor greening, landscape, square, parking lot, roads, bridges, street lamps, outdoor water supply and power supply, communication, closed-circuit cable, broadband, LAN, security, sewage treatment, fire fighting system (pool, pump room, etc.). ), lightning protection system, distribution room, sewage discharge, rainwater.

The preparation of design documents in each stage must meet the requirements of the Ministry of Housing and Urban-Rural Development, J.J. (2008) No.216, Provisions on the Depth of Preparation of Design Documents for Architectural Engineering (2008 Edition) and other regulations.

2.7. Planned commencement date and construction period: the planned commencement date is 2065438+ 10 in February, and the construction period is about 12 months.

3. Qualification requirements and examination methods of bidders

3. 1 This project subject to tender requires bidders to have valid comprehensive Grade A qualification for engineering design or Grade A qualification for architectural engineering design in construction industry, Grade A qualification for municipal industry (or Grade A qualification for bridge engineering in municipal industry) and Grade A qualification for comprehensive engineering investigation (or Grade A qualification for geotechnical engineering in engineering investigation) issued by the construction administrative department. In this project subject to tender, units with design and survey qualifications are allowed to form a consortium to participate in bidding. Units with Grade A qualification of architectural engineering design should voluntarily act as the leader of the consortium, and all parties should have the corresponding qualifications to undertake the bidding project (architectural professional design firms participating in the bidding should form a consortium with units with Grade A and above qualification of architectural engineering design). If it is a consortium composed of the same professional units, the qualification level shall be determined according to the units with lower qualification level;

3.2. The bidder who intends to be the person in charge of the design of this project subject to tender shall have a valid practice certificate of not less than the first-class registered architect;

3.3. The bidder who intends to be the person in charge of this design project should have junior college or above 1 project design performance; The bidder shall have the design performance of 1 similar projects. The design performance of similar projects (the same below) refers to the total construction area of university projects that have completed the design and passed the construction drawing review within the first five years from the date of the issuance of this tender announcement (subject to the date of the construction drawing review, excluding the date of the tender announcement) of not less than 50,000 square meters. (The characteristics of "similar engineering design performance" shall be based on the data specified in the design contract and the construction drawing review and approval letter. If the design contract or construction drawing approval document does not indicate the characteristics of "similar engineering design performance" required by the tender announcement, copies of relevant materials that can properly explain the above characteristics shall be supplemented and stamped with the official seal).

note:

1. The leader of the consortium must have the performance of similar design projects. If the members of the consortium have overseas units, the performance of the overseas units can be regarded as the performance of the leaders, but such performance needs to be notarized by the trade association (or similar institution) where the overseas units are located.

2. In the performance requirements, the total construction area of 50,000 square meters means that a contract package is not less than 50,000 square meters or the accumulated area of the same college or above is not less than 50,000 square meters within five years.

3.4. See the tender documents for the requirements of other major designers of the bidder and other requirements for qualification examination;

3.5. The tenderer of this project subject to tender adopts the method of bidder qualification examination: post-qualification examination.

3.6. If the bidder is a survey and design unit outside Fujian Province and has not set up a branch, it promises to go through the registration formalities according to the stipulations of Fujian Construction [2009] No.5 document within one month after winning the bid; If a bidder sets up a branch in Fujian Province, it shall provide a copy of the business license of a non-independent legal person registered in Fujian Province and a copy of the registration certificate issued by the construction administrative department of Fujian Province.

3.7. The survey unit shall be registered in Rongjianke [2009] No.78.

4. Get the tender documents

4. 1. Anyone who is interested in bidding, please bid at 8: 30am to1:30pm and 6: 5438+0: 00pm from August 20th to August 30th, 20th10 (excluding public holidays and statutory holidays). Purchase bidding documents (including qualification documents) from the representative office of Fujian Bidding Center Co., Ltd. (address: the north exit of Jinjishan Tunnel on the Second Ring Road in Fuzhou); When purchasing the bidding documents, the bidder must submit: a letter of introduction from the unit and a copy of the introduced person's ID card (original inspection).

4.2. The price of each tender document is 50 yuan, which is non-refundable after sale. Bidding drawings and materials are sold in 50 yuan.

5. Bid evaluation method

5. 1. The bid evaluation method adopted in this project subject to tender: comprehensive evaluation method.

6. Submission of bid bond

6. 1. Time for submitting bid bond: before the deadline for submitting bid documents;

6.2. Method of submitting bid bond: bank transfer or telegraphic transfer;

6.3. Amount of bid bond submitted: 654.38+10,000 yuan.

7. Submission of bid documents

7. 1. Deadline for submission of bid documents: 20 10 at 9: 00 am on September 27th, and the place of submission is the bid opening room of Fuzhou Construction Engineering Trading Management Center (address: Jinjishan Tunnel, North Ring East Road, Jinan District, Fuzhou);

7.2. When submitting the bidding documents, the person in charge of the design project to be held by the bidder must be present to verify the registration with the registered architect's practice certificate, ID card and purchase voucher of the bidding documents. If the person in charge of the design project is unable to attend for some reason, it can be replaced by the technical person in charge of the bidding unit (a copy of the unit qualification certificate and personal ID card must be presented for verification and registration).

Remarks: If the qualification certificate of the unit fails to reflect the technical director of the unit, the original certificate of the technical director of the enterprise shall be provided. For the format of "Certificate of Enterprise Technical Director", please refer to Chapter 7 "Bidding Document Format" of Fujian Construction Engineering Design Bidding Document (2009 Edition).

7.3. The tenderee will not accept the bid documents that are delivered late, not delivered to the designated place or do not meet the requirements of the tender documents.

8. expenses

8. 1. The charging standards for engineering survey and design promulgated by the State Planning Commission and the Ministry of Construction in 2002 are design charging standards, including:

(1) The estimated project price (design fee base price) of fuzhou polytechnic Phase II Project is 1.34 million yuan, and the adjustment coefficients of engineering complexity are all 1.0, the adjustment coefficient of engineering specialty is 1.0, and the additional adjustment coefficient is 1.0, which is determined by the tenderer. The design fee for the scope and content of the design contract announced by the tenderer is: 3 15 100000 yuan (i.e. [(566.8-304.8) × (13400-1000) ÷ (2000-)

(2) The estimated project price (design fee base price) of Fuzhou Vocational Education Public Training Base is 85 million yuan, the adjustment coefficient of engineering complexity is 1.0, the adjustment coefficient of engineering specialty is 1.0, the additional adjustment coefficient is 1.0, and the downward adjustment coefficient determined by the tenderer is 20%. The design fee for the scope and content of the design contract announced by the tenderer is: 2 107200 yuan (i.e. [(304.8-249.6) × (8500-8000) ÷ (10000-8000)+249.6) ]× (.

8.2. If the tenderee only requires the winning bidder to undertake the design in the scheme stage and no longer undertake the subsequent design and service, the design fee will be/10,000 yuan (/%of the total design fee in the whole process). (This clause does not apply to this project)

8.3. If the tender content includes survey, the survey fee standard published by the tenderer shall be calculated by 50% downward according to the charging standard for engineering survey and design (JJ[2002] 10) issued by the State Planning Commission and the Ministry of Construction in 2002. According to the above charging regulations and the optimization of design scheme, the bidder will submit its own best survey scheme.

8.4. See the tender documents for the composition of the design fee.