Next, I will introduce the disassembly method of the desktop computer monitor in detail, so that everyone can operate it easily.
Step 1: Turn off the power and unplug the cable.
Before removing the desktop computer monitor, you need to turn off the computer and unplug the power cord. This is to ensure safety and avoid the interference of power supply to the disassembly process. At the same time, it is necessary to unplug the data cable and video cable connected to the monitor before disassembly.
Step 2: Remove the monitor base.
The base of most monitors is detachable, which can be removed with a slight turn. Of course, some monitors need two screwdrivers to open the gap. After removing the base, you can put the monitor on the desktop. Next, you need to remove the shell of the monitor.
Step 3: Remove the casing of the monitor.
Usually, the shell of the display is fixed with buckles or screws. The location of the buckle is generally around the base or monitor, so you need to gently pull it open with a tool to unlock the buckle of the housing in turn. The screws are usually hidden on the back of the monitor and need to be unscrewed with a screwdriver. When removing the monitor housing, be careful not to scratch the monitor surface.
Step 4: Take out the internal components of the display.
After removing the monitor case, you can easily take out the components inside the monitor. Internal components include display screen, battery board, power board, signal board, etc. These parts need to be carefully inspected during the "disassembly process" to see if they are loose or damaged. If there is damage, you can choose to replace the parts.
The above is the disassembly method of the desktop computer monitor. In short, the following points should be noted during disassembly:
1. Be sure to turn off the computer and unplug the power cord first;
2. When removing the shell, you need to gently pull it open with tools to avoid scratching the surface of the display;
3. In the process of checking parts, it is necessary to carefully check whether there are any problems such as looseness and damage.
The above steps are not only applicable to ordinary monitors, but also refer to these methods for disassembly when using other models of monitors. Be careful when removing the monitor to avoid damage or danger during operation.