1. Before installing the pipeline valve, the installer should carefully check the signs and installation instructions on the pipeline valve to ensure the safety and correctness of installation.

In addition, the installation of pipeline valves needs to clean the inside of the installation, mainly to reduce the blockage of the valves.

2. As the key button of the pipeline, the valve needs to be installed in a relatively large space, and the transmission device needs to be connected, and then the pipeline valve needs to be installed vertically, so as to make and check the valve in time and conveniently.

3. When installing the valve, the installer should follow the direction of medium flow as the installation direction.

The purpose of this is to ensure that the flow direction of the medium can be consistent with the direction of the valve.

4. For the pipeline part connecting the valve, the installation of the pipeline valve should adopt diagonal direction, and then tighten the pipeline valve, and it is not allowed to tighten it at one time.

5. According to the arrow indication and closing indication of the pipeline valve, rotate the valve in place and complete the installation.