Safety production responsibilities of mechanical maintenance workers
First, bear in mind that "everyone is responsible for safety in production", establish the idea of "safety first, prevention first", actively participate in safety competitions and activities, strictly abide by rules and regulations and disciplines, do not violate labor discipline, stick to their posts, stay away from work after drinking, and concentrate on safety in production.
Second, seriously study the safety technical operation procedures of mechanical maintenance workers, be familiar with safety knowledge, strictly implement safety rules and regulations and measures, do not operate illegally, do not take risks recklessly, and have the right to refuse illegal command.
Third, the repair machinery should be parked in a flat and solid place, supported firmly and wedged tightly; When using the jack, it must be fixed with a bracket. Do not operate under a moving vehicle. It is forbidden to work or check under the car or stand in front of the car in the aerial test.
Four, maintenance of toxic and flammable containers or devices, should be strictly cleaned, after inspection, open the air channel, before operation. The operation in the container must be well ventilated and supervised outside. .
Five, pay attention to the work to regularly check whether the tools are damaged, gloves are not allowed to be worn when playing a sledgehammer, and no one is allowed to swing the sledgehammer.
Six, maintenance machinery should be "maintenance, no starting" warning signs, non maintenance personnel are not allowed to start or turn. When repairing, it is forbidden to put your hand into the gear box or use your fingers to find the right hole.
Seven, cleaning oil, lubricating oil and waste grease, must be stored in the designated place. Waste oil and cotton yarn are not allowed to be thrown about.
Eight, when repairing the electrical device, you must first cut off the power supply, lock the switch box, put up a warning sign "Someone is overhauling, no closing", and assign a special person to monitor before repairing.
Nine, many people operate the workbench, there should be a protective net in the middle, and the opposite line of defense should be staggered during operation.
Ten, actively participate in safety competitions and safety activities, accept safety education, do a good job in equipment maintenance.
Safety production responsibility system for mechanical and electrical maintenance workers
The mechanical and electrical maintenance man is the manager of the mechanical and electrical equipment in the heading face. Under the direct leadership of the team leader, he is responsible for the inspection, repair and maintenance of the mechanical and electrical equipment in his team. Familiar with the relevant contents of the three major rules of coal mine, the relevant provisions of the Standard of Coal Mine Mechanical and Electrical Equipment Integrity and the Quality Standard of Coal Mine Mechanical and Electrical Equipment Maintenance, and pass the training and examination, and obtain the operation qualification certificate before taking up the post with certificates.
I. Job responsibilities
1. Be familiar with the working standards and operating sequence of this position and strictly abide by them;
2. Strictly abide by rules and regulations, measures, operating standards and procedures to prevent violations and ensure safety;
3. Timely investigate potential safety hazards within the scope of responsibility, actively report and handle them, and make records; 4. Actively and seriously study business technology and safety knowledge to improve business level.
5. Pipe suspension: one cable: the cable is straight, the height is consistent, the cable hanger is even, and the spacing is even, which meets the enterprise standards.
6. Hygiene of equipment: The equipment is placed on the table, neatly arranged, and the safety clearance meets the requirements. The equipment is clean and tidy, without dust. The 20m range around the switchyard shall be clean and tidy.
7. Equipment maintenance: timely maintenance, no live maintenance, screw locking, no explosion, all kinds of protection and locking of equipment and switches are in good condition.
8. Localization of mechanical and electrical accessories: classified placement, shelving and listing management. Spare parts should be placed in a straight line, and plates should be hung in a straight line with uniform specifications. Mechanical and electrical maintenance records should be complete and filled in in time, and hidden dangers of mechanical and electrical equipment should be investigated and dealt with actively in time. Electromechanical boards shall be hung in a straight line with uniform specifications.
9. Be familiar with the structural efficiency principle and technical characteristics of the equipment within the jurisdiction of the team, grasp the running status of the equipment in time, carry out maintenance in time, do a good job in equipment inspection, regular maintenance and mine shutdown maintenance, and make maintenance records to ensure that the equipment is in good running condition.
13. Attend the accident analysis meeting of this class and implement safety measures.
14. Understand the tools, materials and accessories used for the equipment to be maintained, and spare parts for standby equipment should be prepared and stored neatly.
15. Abide by rules, regulations and disciplines, do not leave without leave during working hours, and do not do private and work-related things. Familiar with the route and measures to avoid disasters, can avoid disasters correctly.
Second, the accountability system
16. The electromechanical mechanic will be given a warning if he has one of the following behaviors; And give certain economic penalties; Causing serious consequences, criminal responsibility shall be investigated according to law:
1. violates the responsibilities of this position.
2. Failing to operate normally according to the regulations of this post, or operating illegally, causing accidents.
3. Mechanical and electrical equipment damage or mechanical and electrical accidents caused by personal reasons.
4. Disobeying management personnel without reason.