With the continuous improvement of living standards, there are more and more places to use electricity in life. Therefore, it is necessary to master the following basic common sense of safe electricity use: l. Know the main switch of power supply and learn to turn off the main power supply in an emergency. 2. Touch and test the inside of the power socket without hands or conductive objects (such as wires, nails, pins and other metal products). 3. Touch the appliance with wet hands and wipe it with a wet cloth. Do not pull the wire forcibly when plugging and unplugging the power plug to prevent the insulation layer of the wire from being damaged and causing electric shock; The insulation of the wire falls off, so it is necessary to replace the new wire or wrap it with insulating tape in time. 5. When someone gets an electric shock, try to turn off the power in time; Or use dry wooden sticks and other things to separate the electric shock victim from the charged electrical appliances, and don't save people directly by hand; Younger students should appeal to adults for help, and don't handle it by themselves to prevent electric shock. 6. Don't disassemble the power cord, socket and plug at will. Even if it is as simple as installing a light bulb, you should turn off the power first and do it under the guidance of your parents. Nowadays, more and more household appliances, such as televisions, refrigerators, washing machines, electric irons, hair dryers and electric fans, are used at home. Besides paying attention to the safe use of electricity, we should also pay attention to the following points: 1. Various household appliances have different uses and methods of use, and some of them are more complicated. General household appliances should be studied and used under the guidance of parents, and those with greater risks should not be used by themselves. 2. If there is the smell of smoke, sparks and burning, immediately turn off the power switch and stop using it. At the same time, pay attention to avoid burns when using. 4. Avoid using electrical appliances in humid environment (such as toilet), and don't let electrical appliances get wet, which will not only damage electrical appliances, but also cause electric shock. 5. The fan blades of the electric fan and the dehydration cylinder of the washing machine are rotating at high speed when working, so you can't touch them with your hands or other objects to avoid injury. 6. Stop using TV in thunderstorm weather. Prevent being struck by lightning. 7. If the electric appliance is not used for a long time, it is easy to be damaged by moisture and corrosion, so it needs to be carefully checked before reuse. 8. When purchasing household appliances, you should choose qualified products with reliable quality.

2. What is the knowledge about safe use of electricity?

1, not close to high-voltage charged bodies (outdoor high-voltage lines, beside transformers) and not touching low-voltage charged bodies.

2. Insert or unplug the plug without wet manual switch.

3, installation and maintenance of electrical appliances should wear insulating shoes, standing on the insulator, and cut off the power supply.

4, it is forbidden to use copper wire instead of fuse, it is forbidden to use rubber rubber instead of electrical insulation tape.

5, install electric shock protector in the circuit, and regularly check its sensitivity.

6. In thunderstorm weather, don't use the radio, video recorder and TV set, unplug the power plug and antenna plug of the TV set. Don't use the phone for the time being If you must use it, you can use the hands-free function.

7. It is forbidden to connect wires privately, and students are forbidden to use electric stoves, "quick heating" and other electrical appliances in the dormitory.

8. Don't fly kites and play ball under cables and wires.

Extended data:

Precautions:

1, people's safe voltage is not higher than 36 volts.

2. Do not touch the metal part of the pen tip when using the electric pen.

3. High-power electrical appliances must be grounded.

4. You can't connect the live wire and the ground wire with your body.

5. The total power of the electrical appliances used should not be too high, otherwise the excessive current will cause a fire.

6. Someone gets an electric shock, so you can't pull him with your body. Turn off the main switch immediately, and then separate the person from the wire with a dry stick.

Baidu encyclopedia-safe use of electricity

3. What is the knowledge about electricity safety?

First, learn to read the signs of safe use of electricity.

Clear and unified signs are important measures to ensure the safety of electricity use. Statistics show that many electrical accidents are completely caused by inconsistent signs. For example, because the wires are not uniform in color, the wires are connected to the casing of the equipment by mistake, which leads to electrification of the casing and contact casualties.

Signs are divided into color signs and graphic signs. Color signs are often used to distinguish wires with different properties and uses, or to indicate the safety level of a place. Graphical signs are usually used to warn people not to go near dangerous places. In order to ensure the safe use of electricity, color signs and graphic signs must be used in strict accordance with relevant standards. The standards adopted in China's safety color code are basically consistent with the draft international standard (ISD). The commonly used safety colors are as follows:

1, red: used to indicate prohibition, stop and fire fighting, such as signal lights, signal flags, emergency stop buttons on machines, etc. , all indicate "forbidden" information in red.

2. Yellow: used to mark danger. Such as "careful contact" and "pay attention to safety"

3, green: used to mark safety. For example, "working here" and "grounding gas".

4. Blue: used to mark enforcement, such as "Safety helmet must be worn".

5. Black: Geometry used to mark images, text symbols and warning signs.

According to the regulations, in order to facilitate identification, prevent misoperation and ensure the safety of operators and maintenance personnel, different colors are used to distinguish equipment features. Such as electrical bus, phase A is yellow, phase B is green 7A64E4 B893E5B19E3133365656566, phase C is red, and the exposed grounding wire is painted black. In the secondary system, the AC voltage loop is yellow, the AC current loop is green and the signal and warning loop is white.

Second, the safety precautions:

With the continuous improvement of living standards, there are more and more places to use electricity in life. Therefore, it is necessary for us to master the following basic knowledge of safe use of electricity:

L, know the master switch, learn to turn off the master switch in an emergency.

2. Don't touch and test the inside of the power socket with your hands or conductive objects (such as wire, nails, pins and other metal products).

3. Don't touch the appliance with wet hands or wipe it with wet cloth.

4, electrical appliances should be unplugged after use; Do not pull the wire forcibly when plugging and unplugging the power plug to prevent the insulation layer of the wire from being damaged and causing electric shock; The insulation layer of the wire is peeling off, so it is necessary to replace the wire in time or wrap it with insulating tape.

5, found someone get an electric shock to try to turn off the power in time; Or use dry wooden sticks and other things to separate the electric shock victim from the charged electrical appliances, and don't save people directly by hand; Younger students should ask adults for help in this situation, and don't handle it by themselves to prevent electric shock.

6. Don't remove or install the power cord, socket and plug at will. Even if it is as simple as installing a light bulb, it should be turned off first and carried out under the guidance of parents.

4. It is urgent to summarize the knowledge and common sense of safe use of electricity and the precautions for safe use of electricity. It's for the best.

1. Every household electric meter should be equipped with a master fuse in front and a master circuit breaker and a leakage protection switch in the back. 2. The insulation of the power cord and electrical equipment must be good, and the live parts such as lamp holders, sockets and switches must never be exposed to prevent electric shock. 3. Precautions for live connection: The operator must wear electrical insulating shoes, find a dry wooden mat to enhance the insulation effect, and connect the low potential (zero line) first. Then, when connecting the phase wire, make the phase wire contact with the wire to be connected before operation (to prevent the human circuit from getting an electric shock due to accidental disconnection of the load), and at the same time, there should be someone to monitor it. 4. Why does the lighting switch have to be connected to the live wire? If the lighting switch is installed on the zero line, although the light is not on when it is turned off, the phase line of the lamp holder is still on, so people think that the light is not on and mistakenly think that it is in a power-off state. In fact, the voltage to ground at all points on the lamp is still a dangerous voltage of 220 volts. If people touch these actually charged parts when turning off the lights, it will cause an electric shock accident. Therefore, all kinds of lighting switches or switches of single-phase small-capacity electrical equipment can only be guaranteed if they are connected in series with live lines.

5. What are the basic common sense of safe electricity use?

1. It is forbidden to move household appliances in operation by hand, such as desk fans, washing machines, televisions, etc.

2. It is forbidden to repair live lines or equipment in the home with bare hands and feet.

3. It is forbidden to touch with wet hands and wipe lamps, switches and other electrical appliances with wet cloth.

4. It is forbidden to change the three-eye plug into two-eye plug at will.

5. It is forbidden to pull and connect wires indiscriminately.

6. It is forbidden to increase the use of electrical appliances on the original line without permission.

7. Unqualified electrical equipment is strictly prohibited.

8. It is forbidden to use electric irons, hair dryers, electric stoves and other electrical appliances without supervision.

9. Fishing, theft prevention and hunting in private power grids are prohibited.

10. It is forbidden to use lead wire or copper wire instead of fuse as fuse. Wait a minute.

6. Common sense of safe electricity use

1. Why does the lighting switch have to be connected to the live wire? If the lighting switch is installed on the zero line, although the light is not on when it is turned off, the phase line of the lamp holder is still on, and people will think that the light is not on and will mistakenly think that it is in a power-off state.

In fact, the ground voltage of each point on the lamp is still a dangerous voltage of 220 volts. If people touch these actually charged parts when turning off the lights, it will cause an electric shock accident.

Therefore, all kinds of lighting switches or switches of single-phase small-capacity electrical equipment can only be connected in series on the live line to ensure safety. 2. How to correctly install the single-phase three hole socket? Why? Usually, single-phase electrical equipment, especially mobile electrical equipment, should use three-core plug and its supporting three hole socket.

There is a special protective zero (grounding) jack in three hole socket. When using zero protection, it is very dangerous for someone to directly connect the wiring pile head of this hole with the zero line that only leads into the socket at the bottom of the socket. Because in case the zero line of the power supply is disconnected, or the fire (phase) line and the zero line of the power supply are connected reversely, its shell and other metal parts will also bring the same voltage as the power supply, resulting in electric shock.

Therefore, when wiring, the special grounding jack should be connected with the special protective grounding wire. When zero protection is adopted, the zero line should be led out from the power supply side, and the zero line introduced into the socket should not be used nearby.

3. Why is it forbidden to bury plastic insulated wires directly in the wall? (1) Plastic insulated conductor will age and crack after long-term use, and the insulation level will be greatly reduced. When the line is overloaded or short-circuited, it is easier to accelerate the insulation damage. (2) Once the wall is damp, it will cause a large area of leakage and endanger personal safety.

(3) Plastic insulated wires are directly buried, which is not conducive to line maintenance and repair. 4. Why should I use a leakage protector? Leakage protector, also known as leakage protection switch, is a new type of electrical safety device. Its main purpose is: (1) to prevent electric shock accidents caused by leakage of electrical equipment and electrical lines.

(2) To prevent single-phase electric shock accidents in the process of electricity utilization. (3) Cut off the single-phase grounding fault in the operation of electrical equipment in time to prevent electrical fire accidents caused by leakage.

(4) With the improvement of people's living standards, the number of household appliances is increasing. In the process of using electricity, personal electric shock and fire accidents caused by defects in electrical equipment, improper use and unfavorable safety technical measures have brought undue losses to people's lives and property. The appearance of leakage protector provides a reliable and effective technical means for preventing all kinds of accidents, cutting off power supply in time and protecting equipment and personal safety. 5. What is the main cause of electric shock accident? Statistics show that the main causes of electric shock accidents are: (1) lack of knowledge about electricity safety, flying kites near high-voltage lines and climbing high-voltage poles to dig nests; After the low-voltage overhead line is disconnected, connect the fire line by hand without power failure; Touch the charged body by hand for live wiring at night; Touch the broken rubber knife switch with your hand.

(two) in violation of the operating rules, without taking necessary safety measures, unauthorized connection of lines or electrical equipment; Touch damaged equipment or wires; Wrong installation of live equipment; Electrified lighting; Online maintenance of power tools; Live mobile electrical equipment; Twist a light bulb, etc with wet hands. (3) The equipment is unqualified and the safety distance is not enough; The grounding resistance of two-wire and one-ground system is too large; The grounding wire is unqualified or disconnected; Insulation damage to wires, etc.

(4) The equipment is in disrepair, the line is blown off by strong wind or the pole is not repaired in time; Rubber breaker bakelite is damaged and not replaced in time; The damage of the motor lead makes the shell charged for a long time; The porcelain bottle is damaged, which makes the phase wire and the pull wire short-circuited, and the equipment shell is charged. (5) Due to other accidental reasons, I walked at night and ran into a broken live wire on the ground.

6. What rescue measures should be taken in case of electric shock? When an electric shock accident occurs, while ensuring the rescuer's own safety, we must first try to make the electric shock victim quickly get rid of the power supply, and then carry out the following emergency repair work. (1) Untie the tight clothes that hinder the breathing of the electrocuted person.

(2) Check the mouth of the person who gets an electric shock and clean up the mucus in the mouth. If there are any dentures, remove them. (3) immediately on-site rescue. If breathing stops, rescue with mouth-to-mouth artificial respiration. If the heart stops beating or vibrates irregularly, use artificial chest compression to rescue it.

Never interrupt for no reason. If there is a second person besides the rescuer at the scene, the following work should be done immediately: 1) Provide first aid tools and equipment.

2) convince others at the scene. 3) Keep sufficient lighting and air circulation at the site.

4) Report to the leader and ask the doctor to come to the rescue. Experimental research and statistics show that 90% patients can be saved if treatment is started from 1 min after electric shock. Only 10% chance can save lives if rescue is started 6 minutes after electric shock; But from 12 minutes after electric shock, the possibility of saving lives is extremely small.

So if you find someone getting an electric shock, you should race against time and take all possible measures. 7. What measures are there to use electricity safely at home? With the popularization and application of household appliances, it is very important to correctly master the knowledge of safe electricity use and ensure the safety of electricity use.

(1) Don't buy fake and shoddy "three noes" household products. (2) When using household appliances, there should be a complete and reliable power cord plug.

Household appliances with metal shell should be protected by grounding. (3) Switches and fuses cannot be installed on the ground wire and zero wire.

It is forbidden to connect the ground wire to the tap water and gas pipeline. (4) Don't touch the live equipment with wet hands, and don't wipe the live equipment with wet cloth.

(5) Don't connect wires privately, and don't move live equipment casually. (6) When repairing household appliances, you must first disconnect the power supply.

(7) When the power cord of household appliances is damaged, it should be replaced immediately or wrapped with insulating cloth. (8) When household appliances or wires catch fire, disconnect the power supply first, and then put out the fire.

8. How to prevent burning household appliances? The rated voltage of common household appliances is 220 volts, and the normal power supply voltage is around 220 volts. If the voltage in the power supply line rises instantaneously due to natural disasters such as lightning strike, such as E799BE5BAA6E59EE7AD 943133332633066, the neutral line of the three-phase unbalanced load household line is disconnected due to years of disrepair, or the phase voltage rises and the current increases due to human misconnection, and the household appliances are burnt out due to overheating.

To prevent the burning of household appliances, we should start from the following aspects: First, try to disconnect the power supply when the electrical equipment is not in use.

7. Electricity safety knowledge

1, the household power cord should not be overloaded, and the worn and aging power cord should be replaced in time to avoid accidents.

2. The general insurance of household power supply and household insurance should be equipped with a desk to protect household appliances. 3, temporary power supply to use qualified power cord, power plug, socket to be safe and reliable, damaged can't use, power cord connector should be wrapped with tape.

4. When the temporary power supply line is close to the high-voltage transmission line, it should keep a sufficient safe distance from the high-voltage transmission line (10KV and below 0.7 m, 35KV 1 m,10kVI.5m, 220KV3 m and 500KV5 m). 5, it is forbidden to wiring from public lines.

6, line connector should ensure good contact and reliable connection. 7, room decoration, hidden in the wall of the power cord should be placed in a special flame retardant sheath, the power cord section should meet the load requirements.

8. Use electric tools such as electric drills. Insulating gloves must be worn. 9, in case of household appliances on fire, should first cut off the power supply, and then put out the fire.

10, the wiring of household appliances must be correct. If in doubt, you should ask a professional.

1 1, household electricity should be equipped with qualified leakage protector with overvoltage protection function. Ensure personal safety when using household appliances.

12. When using elbows, household appliances should have good shell grounding and indoor public grounding. 13, wet hands can't touch live household appliances, can't use wet cloth to wipe household appliances in use, and power supply must be stopped before household appliances are repaired.

14, household electric heating equipment, heating equipment must be far away from gas tanks. When gas leakage is found in the gas pipeline, the window should be opened for ventilation first. If the power supply cannot be connected, professionals should be asked to repair it in time.

15. When using electric heating devices such as electric irons and soldering irons, be sure to stay away from flammable materials. After use, cut off the power supply and unplug the bolt to prevent accidents. 16. If household appliances are found damaged, please ask trained professionals to repair them. Do not disassemble it by yourself to prevent electric shock.

17. It is forbidden to drill wells, set up TV antennas and fish under high and low voltage wires. 18. Any broken wire, whether charged or not, shall be regarded as charged, and keep a sufficient safe distance from the broken wire point, and report to the relevant departments in time.

19, found that someone get an electric shock, can't direct contact with the electric shock, the application of wooden sticks or other insulation to remove the power cord, make the electric shock from the power supply. 20. Power plugs and sockets should be arranged out of children's reach, and the elderly and children at home should often be explained the common sense of safe electricity use at home to enhance their self-protection ability.

2 1. In case of direct contact with trees and buildings, trees should be cut down in time to prevent wires from being worn out, or insulation sleeves should be added to the household lines. 22. Walking on the sidewalks in urban areas in thunderstorm weather, don't touch trees, telephone poles and pole stays with your hands to prevent electric shock.

23, are not allowed to be close to or contact with any live parts of electrical appliances, especially the high-voltage output part of black-and-white and color TV sets, so as to avoid electric shock. 24, power switch shell and wire insulation damage or incomplete or live parts exposed, should immediately find an electrician to repair, otherwise are not allowed to be used.

25. Don't use the same cable for the convenience of telephone line and power line. Use different wires or cables, leaving a certain distance when laying. 26. On live household appliances or around worn wires, things with metal wires such as steel tape measure, tape measure and line ruler cannot be used for measurement.

27. It is forbidden to tie animals, ropes and cold things on the pole stay to avoid electric shock. 28. It is forbidden to use 220V power supply voltage for household doorbell and hair clipper, and safe voltage below 36V should be used.

29. When taking a bath, the household electric shower must first disconnect the power supply and have reliable measures to prevent sudden electrification. 30, advocate civilized and law-abiding electricity consumption, put an end to all forms of illegal, illegal stealing.

3 1. Touch and probe the inside of the power socket without hands or conductive objects (such as wires, nails, pins and other metal products); Don't touch wires without insulation; Contact the maintenance personnel in time if you find a thread with * * * *. 32. Don't touch the appliance with wet hands or wipe it with a wet cloth.

When water leakage is found around the electrical appliance, it should be temporarily stopped, and the maintenance personnel should be immediately notified to do insulation treatment, and then it can be resumed after the water leakage is eliminated. Avoid using electrical appliances in humid environment (such as toilet), and don't let electrical appliances get damp, damp or soak in water, so as to avoid personal injury caused by electric leakage.

33. Electric appliances such as electric light bulbs or hair dryers, rice cookers, electric irons and heaters will emit high heat in use. Pay attention to keep them away from flammable items such as paper and cotton cloth to prevent fire; At the same time, pay attention to avoid burns when using. Do not use high-heat light sources or other electrical appliances in mosquito nets, do not install electric lights in wardrobes, and turn off these electrical appliances when unattended.

34. Don't use multiple appliances on a multi-port socket at the same time. The place where the socket is used should be kept dry, and the socket wire should not be wound on the metal pipe.

The extension cord shall not pass through the carpet or wall hung with flammable materials, nor shall it be placed on the iron bed. 35, electrical plug must be plugged in, close contact, don't loose, so as not to generate heat.

Unplug the power plug in time after using the electrical appliances; When plugging and unplugging the power plug, hold the plug tightly and don't pull the wire hard to prevent the insulation of the wire from being damaged and causing electric shock; The insulation layer of the wire is peeling off, so it is necessary to replace the wire in time or wrap it with insulating tape. When an electrical appliance trips during use, you must unplug the power plug first, then contact the maintenance personnel to find out the cause of the trip, and check the electrical appliance fault before determining whether it can be used continuously to ensure safety.

36. In case of thunderstorm, stop using microcomputer and TV set and unplug outdoor antenna to prevent lightning strike. Electrical appliances are easy to be damaged by moisture and corrosion after being put aside for a long time, so they need to be carefully checked before being reused.

When purchasing electrical products, you should choose qualified products with recognized quality. It is necessary to eliminate aging electrical appliances in time, and it is strictly forbidden to extend the service of electrical appliances.

37. Don't disassemble or install the power cord, socket and plug at will. Do not destroy public electrical equipment such as safety indicator lights in the building.

Power consumption should not exceed the allowable load capacity of wires and circuit breakers. When adding large electrical appliances, it should be checked and approved by professionals, and large circuit breakers should not be replaced without permission, so as to avoid inadequate protection and fire.

38. Don't hang clothes on wires, and don't wrap metal wires (such as iron wire, aluminum wire and copper wire). ) power on.

8. What is the common sense of safe electricity use?

1. Touch and probe the inside of the power socket without hands or conductive objects (such as wires, nails, pins and other metal products); Don't touch wires without insulation; Contact the maintenance personnel in time if you find a thread with * * * *.

2. Don't touch the appliance with wet hands or wipe it with wet cloth. When water leakage is found around the electrical appliance, it should be temporarily stopped, and the maintenance personnel should be immediately notified to do insulation treatment, and then it can be resumed after the water leakage is eliminated. Avoid using electrical appliances in humid environment (such as toilet), and don't let electrical appliances get damp, damp or soak in water, so as to avoid personal injury caused by electric leakage.

3. Electric appliances such as electric light bulbs, hair dryers, rice cookers, electric irons and electric heaters will emit high heat during use. Pay attention to keep them away from flammable items such as paper and cotton cloth to prevent fire; At the same time, pay attention to avoid burns when using. Do not use high-heat light sources or other electrical appliances in mosquito nets, do not install electric lights in wardrobes, and turn off these electrical appliances when unattended.

4. Don't use multiple appliances on a multi-port socket at the same time. The place where the socket is used should be kept dry, and the socket wire should not be wound on the metal pipe. The extension cord shall not pass through the carpet or wall hung with flammable materials, nor shall it be placed on the iron bed.

5, electrical plug must be plugged in, close contact, don't loose, so as not to generate heat. Unplug the power plug in time after using the electrical appliances; When plugging and unplugging the power plug, hold the plug tightly and don't pull the wire hard to prevent the insulation of the wire from being damaged and causing electric shock; The insulation layer of the wire is peeling off, so it is necessary to replace the wire in time or wrap it with insulating tape. When an electrical appliance trips during use, you must unplug the power plug first, then contact the maintenance personnel to find out the cause of the trip, and check the electrical appliance fault before determining whether it can be used continuously to ensure safety.

6. In case of thunderstorm, stop using computers and televisions and unplug outdoor antennas to prevent lightning strikes. Electrical appliances are easy to be damaged by moisture and corrosion after being put aside for a long time, so they need to be carefully checked before being reused. When purchasing electrical products, you should choose qualified products with recognized quality. It is necessary to eliminate aging electrical appliances in time, and it is strictly forbidden to extend the service of electrical appliances.

7. Don't disassemble or install the power cord, socket and plug at will. Do not destroy public electrical equipment such as safety indicator lights in the building. Power consumption should not exceed the allowable load capacity of wires and circuit breakers. When adding large electrical appliances, it should be checked and approved by professionals, and large circuit breakers should not be replaced without permission, so as to avoid inadequate protection and fire.

8. Don't hang clothes on the wires, and don't wrap metal wires (such as iron wire, aluminum wire and copper wire) on live wires to prevent insulation wear and leakage, causing casualties. Stay away from high-voltage poles, do not fly kites or shoot birds near power lines, and do not dig holes and borrow soil near cables and stay wires to prevent poles from breaking.

9. If you see a broken wire, don't go near it, and report it to the relevant professional department for maintenance in time. In case of power failure of electrical equipment, the maintenance personnel shall be notified in time for repair.

10, when electrical appliances are burned out or the circuit is overloaded, there are usually some abnormal phenomena, such as smoking, sparking, making strange noises, or overheating the conductor, or even burning to produce a pungent smell. At this time, you should immediately cut off the power supply, then check the electrical appliances and circuits, and find maintenance personnel to deal with them.

1 1. When electrical appliances or circuits are on fire, be sure to keep calm. First, cut off the power supply as soon as possible, or turn off the main brake of the indoor circuit, and then aim at the fire with a special fire extinguisher. If there is no special fire extinguisher around, you can put out the fire in a conventional way under the premise of power failure; If the power supply is not cut off, never put out the fire with water or wet things to avoid electric shock.

12, someone get an electric shock immediately turn off the power supply; Or use a dry wooden stick or other insulation to separate the electric shock victim from the charged conductor, and don't save people directly by hand; If the person who gets an electric shock is unconscious and stops breathing, he should be given artificial respiration immediately or sent to the hospital for emergency treatment immediately.

The above common sense of safe use of electricity must be mastered in daily life. Pay attention to eliminate hidden dangers, and at the same time, in case of electrical fire or electric shock accident, you can keep up with the crisis in time and deal with it quickly to minimize losses.

9. What common sense do you know about safe use of electricity?

1. Apply for electricity, find a power supply station for installation and maintenance, and don't pull the wires without permission.

It is everyone's responsibility to use electricity safely. Consciously abide by the rules and regulations for safe use of electricity. Low-voltage lines should be equipped with leakage protectors, and fuses (fuses), fuses (fuses) or fuse tubes should be selected reasonably. It is forbidden to use copper, aluminum and iron wire instead. 3. Don't build houses, pile firewood, drill fields, drill wells and plant trees under wires, and don't perform or show movies near live equipment such as wires to prevent electric shock and fire. 4. Measures should be taken when erecting a derrick, repairing a house or cutting down trees near the power line. For the line equipment that may be encountered, you need to find a power supply station after the power failure. 5, the carriage through the power line, don't whip, motor vehicles driving or working in the field, don't touch the pole and stay. 6, are not allowed to be near the wire quarrying blasting, are not allowed to dig a hole or soil near the pole, are not allowed to dig a fish pond near the pole, are not allowed to be tied to animals on the pole, are not allowed to destroy the guy, in case the pole is broken. 7. Power lines, communication lines and broadcasting lines should be clearly separated. When the wire is connected with other wires, you should immediately find a power supply office to deal with it. 8. Keep enough distance between the iron wire and the electric wire for drying clothes. Don't entangle them, and don't hang clothes on the electric wire. 9. Educate children not to play with electrical equipment, climb poles, climb transformer platforms, shake cables, fly kites and shoot birds near wires, and don't throw things at wires, magnetic bottles and transformers. 10, don't go near the broken wire, send someone to watch it, and find a power supply station to deal with it quickly. Temporary electrical equipment, such as 1 1, small pumps, threshers, etc., are not allowed to move with electricity, are not allowed to connect electricity with hooks, are not allowed to use stored stranded wires, and are not allowed to use ground climbing lines and waist lines. It is strictly forbidden for minors to approach live equipment, and it is strictly forbidden for those who have not passed the examination by the electric power department to operate electrical equipment. 12, don't touch household appliances such as lamp holders, switches and plugs with your hands. If there is any damage or aging leakage, please find a power supply station to repair or replace it. The metal shell of household electrical equipment should be properly grounded. 13, do not use unqualified lamp holders, light wires, switches, sockets and other electrical equipment. Electrical equipment should be kept clean and intact, and the light wire should not be too long or pulled randomly. 14, when the radio horn calls or smokes, turn off the switch, and don't use water to put out the fire. 15. If the branch is found to touch the conductor, it should be handled by the power supply immediately. 16, it is forbidden to set up a special power grid for theft prevention, fishing, hunting, rat catching and insect prevention. It is forbidden to use "one line and one place" lighting. 17, non-power supply personnel are not allowed to operate the high-voltage switch, and are not allowed to enter the distribution room to touch electrical equipment. 18. If you find an electric shock, don't pull the electrocuted person by hand. Pull down the switch, open the wire with a dry wooden stick and a dry bamboo pole, and immediately carry out on-site first aid with correct artificial respiration or chest compressions.

I hope I can help you!