In daily study, work and life, people use meeting minutes more and more, which are synthesized according to the meeting situation. Therefore, when writing the minutes of the meeting, we should sort out, refine and summarize the main purposes and achievements of the meeting, and focus on introducing the results of the meeting rather than describing the process of the meeting. So how is the relevant meeting minutes made? The following are the minutes templates (5 selected) of safety special meetings I collected for you, hoping to help you.
Minutes of Special Meeting on Safety 1 20xx On the morning of April 15, Mayor xxx of the town government presided over a meeting on safety production in the first quarter in the conference room on the third floor of the town government. Members of the Town Safety Committee attended the meeting, conveying the spirit of the recent work conference on production safety held in the county, respectively listening to the work reports of the responsible persons of the police station, power supply station, geological disaster prevention and flood control, and reporting the work of production safety in the town in 20xx. The minutes of the meeting are as follows:
First, the meeting pointed out that:
In 20xx, with the joint efforts of the members of the Town Safety Committee, the overall safety production in our town remained stable. 20xx 1-3 months, the safety production situation in our town was generally stable. However, the foundation of safe production is still weak, especially the owners' sense of responsibility for safe production is weak, and the road traffic safety hidden danger is serious. The meeting informed that a safety accident occurred in Baofa Comprehensive Processing Factory on the evening of April 10, requiring all relevant responsible units and persons to attach great importance to it, strengthen supervision and pay close attention to the implementation of rectification measures to effectively prevent serious accidents.
Second, the meeting emphasized that:
All responsible units and responsible persons must raise awareness and enhance their responsibilities; It is necessary to conduct regular and comprehensive inspections and find problems in time; It is necessary to promptly urge rectification and eliminate hidden dangers; It is necessary to strengthen cooperation, make concerted efforts, do a solid job in current work safety and create a safe, stable and harmonious society.
Three. Meeting requirements:
All relevant responsible units and responsible persons should strictly follow the deployment and requirements of the higher authorities on safety production work, and combine the actual work and the scope of responsibility to earnestly do a good job in the current safety production work.
1, strengthen publicity and training.
It is necessary to organize all production enterprises to conduct publicity, education and skills training for special post personnel who must hold certificates and strictly implement and abide by laws, regulations and policies on production safety, and establish the consciousness that "production must be safe first" and "safety is the greatest benefit"; Villages should cooperate with the police station to carry out a comprehensive road traffic safety education and rectification activities.
2, strengthen the responsibility, clear work objectives, pay close attention to the implementation of the responsibility system for production safety.
Firmly establish the concept that development is the first priority and safety is the first responsibility, attach importance to safety production in thought and consciously grasp safety production in action. With reference to the control indicators issued by the county government, at the beginning of the year, our town formulated practical safety production responsibility targets, signed safety production target responsibility letters with village committees, relevant departments and enterprises, and implemented the safety production responsibility system layer by layer, so as to truly make the responsibility clear, the responsibility to people, strict management and truly implement the responsibility.
3, to continue to deepen the investigation and management of hidden dangers, do a good job in the supervision of production safety in key industries.
(1) Establish classified management of hidden dangers and classified monitoring system of major hazard sources from two levels of government and enterprises, so as to institutionalize and regularize the investigation and management of hidden dangers and resolutely put an end to new hidden dangers. Enterprises should comprehensively investigate hidden dangers, implement rectification responsibilities, funds and monitoring measures for all kinds of hidden dangers that may cause accidents, and make rectification within a time limit to ensure safe production. The government should strengthen guidance, supervise the establishment of hidden danger investigation and management database, and regularly supervise the hidden danger investigation and management. Improve the quarterly meeting system, safety production performance reporting system, safety education and training system, and improve the emergency rescue plan system of relevant departments. Implement three requirements: first, carefully investigate hidden dangers, leaving no blind spots and dead ends; Second, the responsibility, measures, funds, time limit and implementation of the fifth plan for the rectification of hidden dangers; The third is to establish and improve the classification management mechanism of major hidden dangers and consolidate the results of hidden dangers management.
(2) Intensify the investigation of safety accidents, investigate and deal with serious accidents, strictly investigate the responsibilities, and earnestly implement the safety responsibility system. In accordance with the principle of "four don't let go" of accidents (the reasons are unclear, the responsible person does not deal with them, the workers do not educate them, and there are no preventive measures).
(three) focus on deepening the special rectification work of production safety. The member units of the Town Safety Committee shall, according to the functions of their departments, regularly carry out special rectification work for production safety, and carry out various special rectification activities such as road traffic safety, safety of dangerous chemicals, safety of non-coal mines, safety of civil explosive equipment and fireworks, safety of boilers and pressure vessels, construction safety, fire safety and school safety.
In the second quarter, the work of safety in production showed two characteristics: First, May Day came, and second, geological disasters such as landslides were prone to occur in the spring and summer rainy season. These are the key and difficult points in the work of safety production, and all the work of safety production in the next stage should be implemented. ① Safety rectification of hazardous chemicals, eliminating safety rectification, resolutely closing and banning "three-in-one" and "all-in-one" places, and resolutely closing public gathering places with major safety hazards. (2) Construction safety improvement, special equipment safety improvement, geological disaster investigation, etc. (3) Strengthen publicity and education, improve safety quality, strengthen safety training for the principal responsible persons of enterprises, safety production management personnel and special operations personnel, and improve safety awareness and safety skills. (4) Strengthen emergency management and improve the monitoring system. All departments, units and enterprises should pay attention to the preparation and revision of the plan, ensure the practicability and operability of the plan, and strengthen the construction of emergency teams.
4. Strengthen the reporting system for responsibility implementation.
From the beginning of this quarter, villages and relevant regulatory responsibility units shall, before 25th of the last month of this quarter, submit a written report to the Zhen 'an Office on the performance of safety production supervision responsibilities in this quarter and the safety production work within the scope of responsibilities, and regard it as one of the important contents of the year-end assessment of relevant responsible persons.
Minutes of Special Meeting on Safety 2 Time: April 30th, 20XX.
Venue: xxxxxx
Moderator: xxx
Recorder: xxx
Content:
First, Cao Yongsheng, the project manager, introduced the company's safety requirements.
1. Make sure that every intersection on the construction site has signs and guide card.
2. The construction team must wear safety helmet and safety warning clothing at the construction site.
3, temporary water and electricity must arrange someone who's in charge.
4, do a good job in the project department office life, to ensure the freshness and quality of food; Fire prevention and anti-theft measures should be taken in offices and living quarters.
The project manager divides the work among the employees and puts the responsibility on people. If there are hidden dangers, eliminate them in time. It also introduces the parts that are prone to hidden dangers. Ma Boru, the person in charge of project safety, put forward the following requirements for the construction personnel entering the site:
1. Operators entering the construction site must attend safety education and training first, and can only work at their posts after passing the examination. Those who have not been trained or failed the examination shall not be allowed to work at their posts.
2, personnel engaged in special operations, must carry out physical examination, no disease that interferes with this type of work and has a suitable educational level.
3./kloc-Minor workers under the age of 0/8 are not allowed to engage in construction work.
4. Obey the command of leaders and safety inspectors, concentrate on their work, stick to their posts, and do not engage in non-professional work without permission or work after drinking.
5. Construction personnel must be familiar with the safety operation procedures, safety technical disclosure and the safety production management system of the construction site, do not operate illegally, have the right to refuse the instruction of illegal operation, and have the responsibility to stop others from operating illegally.
6, team (team) leader, every day before going to work, must convene all the staff of the team (team) under his jurisdiction, in view of the construction task of the day, combined with the content of safety technical measures, the working environment, facilities, equipment safety status and the technical quality, safety knowledge, self-protection awareness and state of mind of the team (team) personnel, to carry out targeted pre-shift education activities, put forward specific matters needing attention, and follow up and implement them well.
7, team (team) and team (team) full-time (part-time) security officer must carefully check the working environment, facilities and equipment before going to work every day, and solve the unsafe hidden dangers immediately; Major hidden dangers should be reported to the superior leaders to solve, and risky operations are strictly prohibited. In the process of operation, patrol inspection shall be conducted to correct violations at any time and solve new unsafe hidden dangers; Before coming off work, check whether the electromechanical switch is turned off, whether the door is locked, whether the fire is extinguished, whether the construction waste is produced and sold, and whether the site is cleared after work, and then leave the site after confirmation.
8, enter the construction site personnel must wear safety helmet correctly, fasten the chin strap; Wear personal protective equipment correctly according to the operation requirements and dress neatly; Fasten your seat belt when working at heights [2m above or including 2m] without reliable safety protection facilities; It is forbidden to wear shoes with hard soles and hard nails that are easy to slide when working at height, and it is forbidden to throw materials down. It is forbidden to wear slippers and high heels barefoot to enter the construction site.
9, walking in the construction site should pay attention to safety, not climbing scaffolding, tic-tac-toe frame, gantry.
10, all kinds of safety facilities, equipment, warning signs and safety signs on the construction site shall not be dismantled and moved at will without the consent of the superior leaders.
1 1, before the construction work, carefully check whether the safety protection of the hole, limb, scaffold fence, baseboard and set net is complete and firm; Whether scaffold boards are properly spaced and fastened as required, and whether there are probe plates and gaps.
12, gale, rainstorm, heavy snow and foggy weather with magnitude 6 or above, open-air heights and hoisting operations should be stopped.
13. If unsafe dangers are found during operation, you must immediately stop the operation, evacuate the dangerous area, report to the leader for solution, and do not take risks.
14, scaffolding without acceptance is strictly prohibited.
15. When working in ditches, troughs and pits, the stability of the walls of ditches, troughs and pits must be checked frequently, and ramps or ladders must be used for going up and down ditches, troughs and pits.
16, smoking is strictly prohibited in the construction site, and smoking is allowed in the smoking room.
17, fire in the construction site, should apply for a fire permit, assign personnel to watch the fire, it is strictly prohibited to fire in places where fireworks are prohibited.
18, the general contractor shall be responsible for the safety production on the construction site, and all subcontractors shall obey the management, supervision and inspection of the general contractor.
19. In case of casualties on the construction site, it is necessary to report to the leader immediately to rescue the wounded and protect the site.
Minute 3 of special meeting on safety: 20XX 65438+ 10/0/819: 00-21:00.
Venue: Conference Room 3
Moderator: (Township Head)
Meeting participant: xxx
Meeting recorder: xxx
On the evening of 20xx65438+1October 19, the town-wide regular meeting on production safety and the meeting on production safety arrangement during peak hours in Spring Festival travel rush were held in the third meeting room of X township government. The leaders of the Party and Government Office, the Safety Supervision Station, the Comprehensive Management Office, the Village Management Office, the Water Conservancy Station, the Agricultural Machinery Station, and the three working groups in the village, and the relevant departments in towns and villages attended the meeting. The three departments of the township police station, the health center and the land office were absent due to leave. The meeting was presided over by Comrade Tang X, the head of the township. The minutes of the meeting are as follows:
1. The responsible comrades of township leaders and deputy heads seriously conveyed the spirit of huangping county's 20XX Spring Festival travel rush emergency work and 1 monthly safety production meeting in June 65438+1October 65438+July.
1. Li X, director of the county safety committee and director of safety supervision, conveyed the spirit of the regular meeting of national safety production in the first quarter, informed the work of safety production in X county in 20XX, and arranged and deployed the work of safety production in the first quarter of 20XX.
2. The leaders of the County Transportation Bureau arranged the deployment of the 20XX-year Spring Festival travel rush rush work in our county.
3. The county traffic police battalion chief arranged the road traffic safety work during the deployment of Spring Festival travel rush.
4. Yang X, the deputy county magistrate, signed a responsibility letter for production safety in the first quarter of 20XX with the heads of towns and departments.
5. Yang X, deputy county magistrate, made an important speech.
Two, the township leaders, deputy heads of comrades to arrange the deployment of my hometown Spring Festival travel rush during the rush.
1, fire safety: all units in villages should pay attention to the safety of electricity and fire, strengthen publicity and education for workers and masses, especially when curing bacon, be sure to be vigilant to prevent fires.
2. Traffic safety: Leading groups should be set up at both rural levels to publicize and strictly stop motor vehicles from violating regulations, overloading and speeding.
3. Non-coal mines: The National Land Office should do a good job in the investigation of hidden dangers in non-coal mines before the Spring Festival.
4. Construction: Pan X, the village management office, carries out safety inspection and hidden danger investigation.
5. Village-level safety production work will implement the assessment system. Villages are requested to report the list of leading groups for production safety, the list of voluntary firefighters, the list of roads and villages to the safety supervision station.
6. Other units should do the corresponding safety inspection, and report the inspection records to the township safety supervision station before 25th.
Third, Colonel Tang X made an important speech.
1, work safety in key areas should be publicized and recorded.
2, cadres should improve safety awareness, set an example.
3. Further strengthen the rural banquet greeting system.
4. Severely crack down on illegal operations and maintain market order in Spring Festival travel rush.
5, to strengthen the class system in Spring Festival travel rush during the Spring Festival travel rush peak, the village units should report the arrangement to the township Party and Government Office.
Minutes of special safety meeting. At the meeting, I first got a detailed understanding of the progress of each department, stressed that each department should advance all work processes on the premise of ensuring safety, and made specific arrangements and arrangements for the next work. The following matters were agreed at this regular meeting:
First, the transportation management office will continue to carry out maintenance and renovation in summer, and special attention should be paid to cleaning decontamination devices and filters.
Second, the business department continued to promote the work of clearing debts in summer and increased the efforts of clearing debts of key users.
Three, the dispatching room to develop a heating station as soon as possible one supplement two direct supplement and high, centralized water supply scheme; Next week, organize personnel to visit and study in Jinzhong Ruiyang Thermal Power Company; The dispatching room, technical department and transportation management office are expected to complete the general survey of network and high temperature network in mid-June.
Four. The branch company has set the energy saving target of 1kwh/m2 this year, and the dispatching room, technical department, stationmaster of heating station and transportation management office should cooperate with each other to achieve the predetermined target.
5. The automatic control group will continue to maintain the automatic control equipment of the thermal power station and handle the problems in time when found.
6. The Engineering Department shall complete the project settlement and completion data before mid-June of 20xx, and report it to the Audit Department of the Company before June 30th; Continue to promote the transformation work.
7. The Safety Section will begin to conduct safety education, training and testing for all employees next week, and prepare for the knowledge contest and speech of "Safety Activity Month" in June.
Eight, during the maintenance inspection, all departments should continue to maintain safety awareness, pay special attention to all kinds of grooves and wells in flood season; Emphasize the normalization of safety production inspection, all departments should strengthen anti-terrorism and security work, raise safety awareness and prevent other personnel from entering the factory; Non-working personnel are strictly forbidden to enter the station in each heating station, and it is strictly forbidden for the operators in the station to take over, and it is strictly forbidden to carry out non-working activities in the station; The transportation management office should beware of deliberately destroying the main line of high temperature network; During operation, the safety operation rules should be strictly observed, and the distributed fire extinguishers should be placed in a conspicuous position to prevent high temperature burns; It is forbidden to place irrelevant items in the distribution room, and make insulation protection; Use gas detector when patrolling the line, do well in underground protection, and pay special attention to cables. Special emphasis should be placed on wearing safety helmet and safety belt when going out to work, paying attention to heatstroke prevention and driving safety, raising safety awareness and ensuring safety without accidents.
Minutes of safety special meeting 5 Time: 20xx65438+1October 7.
Venue: conference room on the fifth floor
Participants: all staff of the hospital.
Moderator:
Meeting contents:
1, achieving zero safety accidents in the new year.
2. Safety of electricity use: In winter, when the weather is dry, it is necessary to ensure the safety of electricity use, and the electrician class must regularly check and maintain it to ensure the normal operation of the hospital.
3. Traffic safety: Colleagues and drivers who drive to work must strictly abide by traffic laws and regulations, be diligent in maintenance, and drunk driving is strictly prohibited.
The plan of moving the hospital to the south has been put on the agenda. Please ask all departments to do a good job of relocation in advance, and form a special relocation team, headed by the director.
5. Solve related problems that need coordination.
6. Other related matters.
;