Enter the router management page-advanced settings-working mode -AP client mode-fill in the SSID and MAC address of the main router, and select the same security mode and password as the main router. You can also use the scan function.

Wireless Settings-Basic Wireless Settings-Channel (select the same channel as the main router)

Network settings-LAN ("IP address") should be set to a different network segment from the first router. For example, the IP address of the first router LAN is192.168.1.1. Then the IP address of the second router should be changed to192.168.2.1).

In this mode, it's like a line connecting from the LAN port of the upper router to the WAN port of the lower router, except that it is connected to the WAN through the Wi-Fi interface. All Ethernet wired interfaces are used as local area networks.

Unlike WDS, the AP client works in a complete router mode, so it can have all the basic functions of a router.

WDS works in the subnet of the superior router, and the AP client can build its own subnet, which is convenient for network configuration and management.

Note: After switching modes, the router needs to be restarted to take effect.

Wish you a happy life! If you have any other questions, you can also log in to the telecom online business hall (/) for consultation.