Inspector's work summary report 1
He joined _ _ Industry & Trade Co., Ltd. from March 65438 to February 2000, and was transferred to the bearing workshop to engage in quality work according to the needs of the company. I am serious, careful and have a strong sense of responsibility and dedication, diligent and have great enthusiasm for my work; Cheerful personality, willing to communicate with others, good and skilled communication skills, strong teamwork ability; Strong sense of responsibility, able to complete the work assigned by the leadership. Get along well with company employees and cooperate with department leaders to complete various tasks; Actively learn new knowledge and skills, pay attention to their own development and progress, get familiar with the company's basic situation and related work in a short time, and immediately enter the working state.
In the work of this department, I worked hard and was recognized by the leaders and colleagues of this department. Of course, I also made some minor mistakes and problems in my work, and the department leaders pointed them out to me in time, which promoted the maturity of my work.
Time flies, time flies, and 20__ years have passed in an instant. Looking back on 10, as an inspector in the quality department of the company, I have made a lot of progress, but there are also some shortcomings.
In the quality department for one year, with the care and guidance of the leaders and the support and help of my colleagues, I not only completed my job diligently and practically, but also successfully completed all the temporary tasks assigned by the leaders, and improved myself in all aspects. In order to do a better job in the future, sum up experience and draw lessons, I will summarize the work in the second half of the year as follows:
1, study hard and learn new knowledge comprehensively.
Inspection work is a special post, which requires endless learning of new knowledge and improvement of skills. In order to meet this requirement, we must attach importance to learning.
2. Work hard to accomplish the above tasks.
After half a year, it is difficult for non-professional students to learn the quality of machining, but I actively responded to the difficult challenges and completed the tasks assigned by the leaders.
3. Positive attitude towards daily life and work.
Over the past year, I can consciously abide by the company's rules and regulations. At work, don't be late, don't leave early, take the initiative to ask for leave, respect leaders, unite colleagues, treat others sincerely and work hard. I managed to do it:
First, self-discipline according to regulations. I will never do what the leader forbids, but I will try my best to be a competent quality inspector without violating the rules and regulations.
The second is to use system self-discipline. I strictly abide by the rules set by the company.
In terms of quality, resolutely do what should not be used, resolutely do not use it, and do not engage in humanism. You can also take a positive attitude towards your work and work hard to finish it, so as not to be offside and not in place. In the work coordination with other colleagues in the department, we have achieved mutual understanding, mutual help, mutual learning and sincere treatment, established friendship and gained many useful inspirations. I know that behind the achievements are the joint efforts and hard work of all the staff in our quality department. In the future, I will still treat extraordinary things with a normal heart, be brave and enterprising, and do everything well as always.
4, the main problems
Looking back at my own problems, although I can work hard and make some achievements, there are still many places that need continuous improvement and perfection. I have been working hard to do well. Due to the lack of professional knowledge and work experience, the solutions to some problems are too simple and the working methods are too simple; Sometimes, we look at problems one-sidedly, and we are not calm enough to deal with some problems. On the basis of completing the tasks assigned by the leaders, we will give full play to our own advantages, continue to strengthen the study of professional knowledge, and further improve various inspection skills.
5, 20__ year work plan
In the new year, I am determined to seriously improve my business and work level and contribute my due strength. Next, I will learn from other colleagues and colleagues with an open mind and learn good working methods; At the same time, in my spare time, I work hard to learn business theory knowledge, expand the range of curiosity knowledge, and constantly improve my professional quality and level, so that my comprehensive quality can be improved to meet the development of the company and the needs of society. It is necessary to further strengthen the professionalism, enhance the sense of responsibility and improve the level of work completion.
I think I should try to do:
First, according to the requirements of leaders, strengthen study and master technology maturely;
Second, broaden professional knowledge, participate in various inspector qualification training and examinations, and make yourself a qualified quality inspector as soon as possible;
Third, seriously study and implement the "Mechanical Processing Quality Control System", work hard, accept the routine and temporary tasks arranged by the company, and finish them in time;
Fourth, the inspection instruments should be operated correctly, cleaned in time, registered in time, and maintained daily;
Fifth, love your job and continue to learn quality.
In short, state of mind determines state, and state determines success or failure! Responsible for the company, caring for the society, persistent in work, enthusiastic about colleagues and confident in yourself! Be the best of yourself!
Inspector's work summary report II
In 20__ years, under the correct leadership of the higher-level leading department and the care and guidance of the competent departments at all levels, we fully implemented the development concept, worked hard to complete various tasks in accordance with the overall work arrangements and requirements at the beginning of the year and combined with the actual situation of the center, and achieved good results. The summary of work in 20__ and the specific report of work arrangement in 20__ are as follows:
First, learn the concept of development and master advanced theories.
Under the correct leadership of superiors, this year, our center actively and seriously carried out the activities of studying and practicing the concept of development, and carefully organized and grasped the activities of studying and practicing the concept of development in strict accordance with the requirements of superiors, so as to achieve more prescribed actions, more study time and a good balance between work and study, promote the development of all work with the concept of development, and successfully complete all tasks of studying and practicing the concept of development. By studying and practicing the concept of development, our center has mastered advanced theories and deeply realized that the concept of development is not only an important guiding principle that China's economic and social development must adhere to for a long time, but also a powerful ideological weapon for us to do a good job in building engineering inspection. We firmly established and conscientiously implemented the development concept, linked it with speeding up the development of construction engineering inspection and completing various tasks, earnestly performed our duties and did a good job according to the requirements of the superior leadership department, and achieved positive results.
Two, work hard, and actively create a new situation in construction engineering testing.
1, aggressive and innovative detection mode
According to the overall arrangement of the annual work, in the face of the present situation that the inspection work has a large amount of tasks and many contents, our center is based on innovative ideas, detailed measures and pragmatic work to do a good job in the inspection and testing of engineering materials and main structures. First, strengthen the detection of the main structure, paying special attention to the handling of quality problems. Seriously investigate and deal with the quality problems that affect the structural safety and fail to meet the main use functions, focusing on the common quality problems that appear in the work. The second is to change the detection method and implement differentiated management. The original appointment and notification detection methods were changed to engineering inspection and spot check of key parts. The third is to carry out sampling inspection of A and B samples of engineering materials. Taking the products with the same batch number and specifications as the sampling base, two groups of samples, A and B, are taken at the same time, which are the initial inspection samples and the re-inspection samples respectively. Among them, sample B is used for re-inspection in case of unqualified initial inspection and disputes, so as to ensure the fairness and justice of the test results.
2. Strengthen the construction of testing institutions and improve the quality of testing work.
Our center strengthens the construction of testing institutions and improves the quality of testing work, focusing on two aspects: First, we make unremitting efforts in business learning for a long time, strengthen the awareness of post skills and improve the comprehensive quality of employees through internal skill competitions organized by employees every quarter. The second is to increase investment in equipment renewal, and promote the transformation of quality inspection of instruments and equipment from manual qualitative inspection to quantitative inspection, so as to truly achieve the purpose of speaking with data, avoid human factors, maintain the nature of inspection behavior, and transfer the quality control in inspection to before and after, so as to prevent problems before they happen.
3. Implement measures to promote the development of testing work.
In order to serve the society, do a good job in building engineering inspection and achieve good economic and social benefits, our center has taken certain measures to ensure the completion of all the work, focusing on the following three aspects: First, implement post responsibilities. Our center formulates job responsibilities according to work items, work overview, work standards and required knowledge and skills, and implements them to people, so that every department and everyone has job responsibilities, and every job and everything is managed and caught. The second is to carry out quality services. The key to high-quality service is to facilitate the masses to handle affairs, shorten the time limit and improve work efficiency. On the one hand, our center pays close attention to the business training of employees and improves their business level. On the other hand, we should establish the concept of staff quality service, provide quality service for construction projects, win people's satisfaction, and comprehensively enhance the image of our testing service. The third is to strengthen work innovation. Our center has a wide range of work areas, rich content and heavy tasks. To do a good job in testing and create economic and social benefits, we must strengthen work innovation. Our center has carried out various testing work with innovative working ideas and innovative working methods, and achieved good results.
Third, promote Excellence with sincerity and ensure that the work of clean government is implemented.
Our center deeply understands that the integrity work is not only related to the healthy development of construction engineering testing, but also related to the popular support and affects the implementation of all work. Cleanliness is not only the requirement of superiors, the hope of the people, but also the minimum moral requirement of every cadre and worker in our center. Our center attaches great importance to cleaning work and always regards it as an important work. It requires every cadre and worker to do a good job of honesty at all times, ensure that honesty is implemented to promote Excellence with sincerity, pay attention to maintaining their own image from daily trivial matters, and be a construction project inspector satisfied by the people.
Four. Work arrangement for 20__ years
1, study hard and improve your work skills. Testers are busy on weekdays, and their business study and research are not enough. It is necessary to strengthen self-study, learn the development concept, construction engineering inspection theory and business skills, improve ideological understanding and business knowledge, improve work skills, do a good job in various inspection work, and improve work efficiency.
2. Improve the system and do a good job in testing. Our center should improve various systems, manage people by systems, establish an innovative and developing working mechanism, do a good job in various testing work, and improve people's satisfaction with our center's testing work.
3. Implement the party's work style and clean government, and create a clean and democratic style. In the testing work, our center should, in accordance with the requirements of "responsibility in place, supervision in place, investigation in place", implement the unified deployment of the responsibility system for building a clean and honest party style by the higher-level leading departments, fill in the file report on clean and honest party style, sign the responsibility book for building a clean and honest party style, clarify responsibilities and strengthen supervision. Every inspector should set an example, be honest and self-disciplined, and there should be no violations.
In the past 20__ years, although our center has done a lot of work and achieved certain results, it still lags far behind the requirements and hopes of superiors. In the future, our center will continue to strengthen learning, deepen management, and strive to raise the inspection of various construction projects to a new level with pragmatic work style and innovative development ideas in accordance with the requirements of development concepts, so as to make due contributions to local economic development and social progress.
Inspector's work summary report 3
In July, 20__ _, I graduated from _ _ _, and joined the work in the same year. He was hired as an assistant engineer by the company in July, 20__, and passed the title of _ _ engineer in June, 20__. Since I took office, I have been mainly engaged in highway engineering testing, technical services, scientific research and development and related professional and technical work. Over the past few years, based on my own work, I love my job and have a strong professionalism and dedication. I am hard-working, proactive, hard-working, diligent in thinking and clear in thinking. Can combine practical work with theoretical research, and actively contribute their wisdom and strength to the long-term development of this unit.
I. Main work performance
1, do a good job in the daily management of the laboratory to ensure the normal operation of the equipment and the accuracy of the test report data.
In the company, I am in charge of all 14 functional laboratories such as traffic engineering, aggregate, asphalt mixture, geosynthetics, etc., and have formed a relatively perfect management mode in equipment maintenance and daily inspection. Each laboratory has more than 200 sets of test and detection equipment. I have made a detailed maintenance plan for some frequently used and easily damaged equipment, so that it can be operated by special personnel and maintained regularly by special personnel. In recent years, the laboratory equipment has run well and passed the verification and calibration, ensuring the objectivity and accuracy of all kinds of test data; In the daily test, I led the department staff to strictly control all aspects of the test according to the requirements of the company's program documents, and trained a large number of excellent testers. In the past five years, our company has achieved satisfactory results in the comparative tests of various engineering materials organized by the Ministry of Communications and the Provincial Communications Department, laying a good foundation for the healthy development of the company.
2. Innovate the technical service mode, improve the technical service level and ensure the project quality.
In recent years, I have been responsible for leading my colleagues to complete _ _ high-speed, _ _ high-speed, _ _ high-speed, from raw material test, mixture ratio design, paving in experimental section to normal stage. In the process of technical service, we give full play to collective wisdom, actively innovate and be rigorous and realistic. Based on the Marshall design method required by the specification, Bailey method and superpave method are used to verify the performance, and a variety of materials and ratios are used to verify the performance, which accumulates a lot of data on the high and low temperature performance of asphalt mixture. It has been well applied in solving the problems of site material source change and many influencing factors in the construction process, solving a lot of technical and construction problems for the entrusting unit, laying a good foundation for the smooth progress of the project, and the technical service level has been fully recognized and praised by the entrusting unit and the project owner.
Second, scientific research topics
In recent years, as the person in charge or main personnel, he has participated in and implemented the experimental testing and professional technical services of many scientific research projects of the company.
The above three topics are the first practical application of new materials in our province. After later monitoring and testing, the project has achieved the expected purpose.
Since I joined the work, I have worked hard to learn the theoretical knowledge and professional skills of my major, and attached importance to constantly improving my professional level and ability. Through years of hard work, my professional skills and professional working ability have been greatly improved, which has laid a solid foundation for the better completion of various tasks and has also been recognized by the leaders. From 20__ to 20__, he was awarded the title of "Excellent Employee of the Year" for five times in a row, and published many academic papers in various professional journals, such as _ _, _ _, _ _.
Third, continue to study.
In order to better adapt to the present work, I should actively study and participate in various continuing education to improve my professional level while trying to do my job well. 12 participated in the safety and environmental protection education and training for supervision engineers organized by the Ministry of Transport on February 20th, and passed the examination. In February, 2000, he took part in the continuing education and training examination for road engineering test inspectors in Shandong Province and passed the examination.
In my future work, I will definitely study more actively, constantly improve my working methods, improve my work efficiency, be down-to-earth, work hard, and strive to become an excellent engineering and technical professional.
I promise that the personal information and certification materials I provide are true and accurate, and I will be responsible for the consequences caused by providing false information and certification or violating relevant regulations.
Inspector's work summary report 4
It's almost over. This year, we have been busy: sampling, measuring and writing reports. Then send the unqualified report to the support department and submit it to the corresponding department for signature, then stamp the report signed by them and the support application waiting list, and finally send the support application waiting list to the warehouse. In the month or two since the financial crisis spread to our factory, the situation has eased slightly, but it can only be said that it is saturated. Sometimes in order to finish the day's work, we have to put off work and come to work early the next day. The busiest time gives people a feeling of physical and mental exhaustion: not only to ensure the quality of purchased parts, but also to complete a day's work. Sometimes you have to communicate with relevant departments when you encounter urgent items and the quality is unqualified. During the inspection, the unqualified parts should be pointed out to the delivery party at that time and how to do it. In the whole testing process, because the technical drawings are not in place, especially for new products, things are often delivered, but the drawings are not here, which also increases our difficulty and workload. With our unremitting efforts, the quality of outsourcing is constantly improving: for example, the left taper and the outer diameter of the rod are better than before. Of course, there are still shortcomings in other aspects, and we need to continue to work hard. How to improve the quality of externally supplied parts is our next direction and our focus in the future.
A total of 3945 batches of crankshafts (including blanks, semi-finished products, quenched parts and eccentric shaft holes drilled) were inspected within one year, of which 1 193 batches were unqualified, accounting for 30.24%, and motorcycle crankshafts (including cranks, connecting rod blanks, semi-finished products, quenched parts, deep holes drilled and spline teeth rolled) were inspected. ). Among them, 1666 batch was unqualified, accounting for 30.79% of the total batch, and 1888 batch of other miscellaneous parts (including various timing, speed regulating teeth, needle rollers, bearings, gaskets, oil slingers, sprockets, locating pins, semi-circular keys, etc.). ), of which 128 was unqualified, accounting for 6.728.
The unqualified contents of crankshaft mainly include: metallography of blank, flash of trimming die, oxide scale of non-machining parts, wrong die of rod part, geometric dimensions of precision forging blank, etc. Axial length of semi-finished products and quenched parts, deviation of central hole, large jump of connecting rod, deviation of crank and surface corrosion.
The unqualified items of motorcycle crankshaft mainly include: metallographic structure, cracks and the outer diameter of crankshaft pin; Metallography, corrosion, depth of central hole, difference between inner and outer rings of degassing, thickness of end face and protrusion of crank surface; Metallography and hardness of quenched connecting rod.
The unqualified items of other miscellaneous parts mainly include the following aspects: the drift and metallography of the needle roller, the cleanliness of the bearing, the metallography and hardness of the semi-circular key, the M value and appearance of the teeth, the aperture and metallography of the sprocket, the outer diameter and thickness of the oil slinger, and the outer diameter of the positioning pin.
It was a hard year for me, and it was also a year of harvest. Through the inspection of external parts, I have mastered the conventional errors of products and can focus on spot checks during inspection. It can not only control the quality well, but also improve the detection efficiency and further improve my ability; Through the visit in the workshop and the communication with the patrol inspection, we can understand which dimensions have any influence on the later process, so that we can know fairly well when making judgments, reduce misjudgments, improve the accuracy of judgments, and avoid unnecessary disputes; Through communication with different departments, my cooperation ability has also been strengthened, and I can be more flexible and decent when dealing with problems.
Let me keep learning in a year of hard work, make progress in learning and grow in progress.
In the next few years, in order to better control the quality of externally supplied parts, we will strive to control unqualified products outside the factory. Shorten the circulation cycle of externally supplied parts in the workshop and improve production efficiency. In order to improve the quality of the parts shipped by our factory and achieve the first level, we need to do the following things well:
1: Technical drawings or operation instruction cards need to be sent to us immediately, so that we can improve the detection efficiency and accuracy;
2. When the product changes, the technical department can immediately send us a change notice, or can immediately change the changed size on our drawings to reduce the occurrence of batch scrapping caused by such errors.
3. Equipped with necessary detection tools or tooling to reduce detection errors;
4. Provide the outsourcing unit with the same operation instruction card as we use, so that the report specifications provided by them are consistent with our own work for other units to check.
5. I hope that the purchasing department can arrange the time reasonably (especially for rough and semi-finished products) when notifying the outsourcing units to arrive, and don't come to several factories at the same time, especially after work. In this way, the accuracy of our metallographic examination is more difficult.
6. If there are any quality problems that need to be solved immediately, please ask the relevant personnel of relevant departments to give an immediate reply, and don't let the externally supplied parts stay in our place for too long, so as not to delay the production plan and progress.
This is a difficult year, but also a year full of hope. With the joint efforts of everyone, we will work together to overcome the difficulties, build a high-quality crankshaft, go global and build a beautiful crankshaft.
Inspector's work summary report 5
Over the past 20 years, with the help and guidance of leaders and colleagues, I have further improved my professionalism, ideological realm, professional quality and working ability through my own efforts, and achieved certain work results. Now I will summarize my personal work for one year as follows:
First, strengthen study and pay attention to improving personal moral cultivation.
First, strengthen political, ideological and moral cultivation through magazines, newspapers, computer networks and TV news.
Secondly, I have carefully studied the exceptions and appendices of China Pharmacopoeia 20 10, and the China Code of Practice for Drug Inspection. , enhanced my professional knowledge and inspection level.
The third is to learn business knowledge, actively participate in the inspection knowledge and skills training of food, health care products and cosmetics in the provincial food and drug inspection institute and the national training course on inspection technology of Chinese herbal medicines and decoction pieces, strictly follow the requirements of establishing a "learning" inspection institute, and always take improving the inspection and testing level as the basis of all work; Always make the work rigorous and meticulous, down-to-earth, pragmatic.
Fourth, constantly improve the learning methods, stress the learning effect, "learn at work and work in learning", persist in applying what you have learned, pay attention to integration, integrate theory with practice, consolidate and enrich comprehensive knowledge with new knowledge, new thinking and new enlightenment, so as to keep up with the times and continuously improve your comprehensive ability.
Second, strictly perform their duties and work hard.
Over the past year, with a high sense of responsibility and dedication, I consciously obeyed the arrangement of the organization and leadership, worked hard to do all the work, and successfully completed all the tasks.
1. With the completion of the evaluation and sampling of traditional Chinese medicine, 245 batches of Chinese herbal medicines and Chinese herbal pieces were sampled, covering all major users, operating enterprises, large retail pharmacies and 1 manufacturing enterprises in our city, achieving the sampling purpose.
2. In the whole year, 66 batches of "Fructus Cnidii" and 0/4 batches of "KLOC-0" varieties of essential drugs were completed. This inspection of basic drugs has further understood the inspection methods of chemical drugs.
3. During this period, the gas chromatograph and thin-layer scanner were installed and debugged, and the instruments were inspected and operated. The newly installed liquid chromatograph and dissolution instrument were systematically studied, and the operation and use of the new instruments were mastered skillfully.
4. Calibrate the glass instrument in the laboratory and complete the titration of two batches of titrant.
5. Actively participate in the relocation and food certification during the laboratory transformation.
In a series of work, I know that as a qualified inspector, I should not only have relevant knowledge and skills, but also have a rigorous, meticulous and patient work style. At the same time, I realized that no matter what position you are in, even if it is a humble job, you should do it with your heart. Even if it is a boring job in the eyes of others, you should be good at finding fun from it, changing with each passing day, and looking for innovation from change. In 20__ years, I will make a good personal work plan for 20__ years and strive to carry out all the work better.
Related articles of the inspector's work summary report:
★ Inspector's personal work summary and plan
★ Inspector's Work Summary Fan Wenxuan
★ 20 17 personal work summary of inspectors
★ Inspector's Personal Work Summary Report 20 19
★ Inspector's work summary report
★ The latest inspector's annual work summary is 3 articles.
★ 10 summary and shortcomings of the selected quality inspector.
★ Inspector's personal work summary
★ Inspector confirms the work summary report.
★ Summary and reflection on personal work of inspectors