A year's work has come to the end of the year, and this year will also become a thing of the past. We have made great progress through our efforts in the past year. If you are still confused, then I think you need to stop for a while and sum up your past work. I believe many people are in a state of confusion and inner collapse! The following is the year-end summary (5 selected articles) of the third-party testing that I compiled for you. Welcome to read the collection.
Year-end summary of third-party testing 1 In recent years, with the strong guidance and support of leaders at two levels in urban areas, the facilities and equipment of xxx construction engineering testing center have been gradually improved, and the business capacity has been continuously improved. Based on the reality of the development of xxx construction industry, the center actively carries out its work, which provides a strong technical guarantee for the healthy and stable development of xxx construction industry.
I. Basic information
Xxx Construction Engineering Testing Center, established in xx, is a third-party testing institution. It has a comprehensive office, a financial office, a testing department, two testing departments and three testing departments, and the office testing place is 1 138 square meters. At present, the center has 2 employees1person and front-line inspectors 18 people, including 4 technicians 14 people, 2 senior engineers, 6 engineers or above, 4 with bachelor's degree and 8 with college degree.
In recent years, in order to implement some national mandatory standards and adapt to the ever-increasing testing standards and requirements, our center has purchased nearly 40 sets of testing equipment, including building exterior window insulation, building exterior window three physical properties, pipe fittings, pipe sockets, rebound apparatus, building exterior wall insulation, valve testing, wires and cables, waterproof materials, indoor environment monitoring and so on. At present, the center has 106 sets of testing equipment. The center has dozens of testing items such as building steel, cement, waterproof materials, mortar, building doors and windows, wires and cables, geotechnical engineering, external wall insulation, indoor environment testing, and nearly 100 parameters testing capabilities.
With the rapid development of the construction market in our region, the amount of testing and reinspection of building materials is also increasing, and some problems and contradictions are also constantly prominent and emerging. Over the years, guided by the concept of ensuring the quality of material test and serving the construction industry, and in accordance with the management idea of "scientific, rigorous, enthusiastic and efficient", we have actively carried out various test and detection work, provided reliable data for the majority of construction enterprises, and completed the sampling tasks assigned by superiors in time, ensuring the healthy and stable development of the construction industry in the whole region, and achieved good results in the test and detection work.
Two, strengthen the system construction to ensure the stable operation of the management system.
1. Our center conducts testing of building engineering materials in strict accordance with national standards, industry standards and laboratory operating procedures. All records and reports of the laboratory are standardized and detailed, which meet the requirements of the management system. A sound management system has been formulated, and working systems and norms for financial management, open government affairs, assessment and training, quality management and technological innovation have been established and improved. Starting with changing the concept of work and establishing the concept of service, we will continuously improve the service level and revise and improve various management systems in time, such as the management system of building a clean government, the working hours and the daily work management regulations.
2. Actively change the concept and implement the first question responsibility system. The first person in charge receives the personnel entrusted by the construction unit and has the responsibility to serve them. Specifically, smile service, wait patiently, accept seriously, be warm, polite and considerate, constantly enhance the awareness of active service, conscious service and enthusiastic service, and further disclose the procedures, standards, time limit and results. Through the implementation of the first inquiry responsibility system, the service level of the center has been significantly improved, the work style has been continuously improved, and the work efficiency has been significantly improved, further forming a standardized, coordinated, fair, transparent, clean and efficient center operation mechanism.
3. The Center earnestly carried out internal audit and management review, promoted the continuous improvement and development of all work, formulated the verification, supervision and inspection and personnel training plan during the inspection, and carefully organized and implemented it. The center regularly carries out supervision and inspection, and conducts internal audit and management audit of laboratory quality management once a year, which plays a role in standardizing procedures and correcting the lack of standardization of testing work, so that employees are bound, controlled, restrained and punished in their daily work, and through audit and training, employees can understand the importance of testing work in construction projects. Center staff should have good professional ethics and social responsibility, as well as a high sense of collective, overall situation and ownership, and really put an end to eating and taking cards.
The third is to carry out testing work in a down-to-earth manner and implement an automatic management system for testing.
1. From entrustment, filing, original records, testing and final report, the management procedures approved by the national laboratory shall be strictly implemented, and no original data shall be modified. If there are any changes, it is necessary to ask the reasons and perform the procedures of review and instruction at different levels. The center regularly checks and verifies the instruments and equipment to keep the equipment accurate, reliable and stable; Strictly control the test environment, and the tester carefully records the test conditions, so that the temperature control and humidity adjustment equipment are complete and effective, and the environmental conditions meet the specification requirements; The control and management of sample circulation process were strengthened, a perfect sample management system was established, and the sample room was standardized and adjusted. The sample circulation process is clearly marked and recorded in detail. For controversial test samples (such as cement, steel bars, etc.), inspection and retention should be carried out to ensure the authenticity of test data and engineering quality.
2. While ensuring the authenticity and accuracy of the test report data, the Center continuously strengthens the control and management of the test report. The center implements a three-level audit system, requiring personnel at all levels (experimenters, auditors and approvers) to make a test report seriously, accurately, timely and efficiently, so as to ensure that the records are verified correctly and the information is sufficient, and the responsibilities are put in place.
3. The center also actively promotes the automatic management system for test detection. With the support of the competent department, it installed a monitoring camera device to ensure the integrity of sampling and sample preparation of test samples under recorded conditions, especially the raw materials that affect the main structure (such as steel bars, cement, and "two strong compressive" samples), so that the manufacturing supervisor and the center tester can be present at the same time to witness the scientific, fair and accurate test process and test data, effectively preventing fraud.
Four, timely communication of information, strengthen personnel technical training.
1. In order to ensure the engineering quality, our center actively invites the municipal testing center to conduct testing according to standards for some testing items with high technical requirements, such as static load and dynamic load of foundation piles, and communicates with the municipal testing center in time for other items that have not been carried out, such as concrete tiles, safety helmets, safety nets, radiators, lime, steel pipes for scaffolding, fasteners, anti-sliding coefficient of bolt connection pairs, and rock wool tube. At the same time, timely test all kinds of raw materials entrusted by construction enterprises, control the test process and results at any time, and ensure that the first test is carried out in strict accordance with the test cycle and the report is issued. Report the problems found and the test results of unqualified raw materials to the competent department in time, and notify the quality supervision station, supervision company and construction unit in writing 24 hours in time. It is forbidden to use unqualified materials in construction projects to ensure the quality of the projects.
2. Our unit attaches great importance to the training and assessment of technical personnel in the center, improves the team building, and ensures that inspectors accurately master and apply the testing standards for raw materials in construction projects, and organizes training twice a year. Training and assessment of testing personnel should be carried out as planned. All testing personnel should hold relevant certificates and their technical ability should meet the requirements of testing positions.
Through serious and rigorous work, the mental outlook and service quality of the center have undergone brand-new changes, and the center has become more United and the social evaluation has been continuously improved. In 20xx, all kinds of building materials testing items were completed 19477 groups, and 756 groups were unqualified, with the unqualified rate of 3.88%.
Summing up the past, we have accumulated some successful experiences and made some achievements in practical work, which is inseparable from the strong support and concern of superior departments and leaders. However, we are also clearly aware that there are still many shortcomings in our work, and compared with the advanced brother testing center, it needs to be further improved and improved. The management of testing center is a long-term and systematic work. In the future work, we will further standardize our own management according to relevant laws and regulations, learn from the advanced experience of our brother units with an open mind, improve the testing service level, carry forward the management spirit of "scientific, rigorous, enthusiastic and efficient", and make great achievements in the testing work.
Year-end summary of third-party inspection 2 Xiamen-Zhangzhou cross-sea bridge project started in front of Ma Qing Road in Xiamen and ended in Houzhai, Longhai City, Zhangzhou. The total length of the route is 9.333 kilometers, of which the bridge length is 8.555 kilometers. The bridge project is mainly composed of four parts: north branch approach bridge, north branch main bridge, north branch south approach bridge, Haimen Island interchange and toll service area, south branch bridge and Pinghai interchange. 20xx65438+February, the central laboratory of Xiamen-Zhangzhou Cross-sea Bridge was invited for public bidding nationwide, and Shenzhen Expressway Engineering Testing Co., Ltd. won the bid. At the beginning of 20XX, the company organized personnel and equipment to enter the site. The service period of the project construction period is 54 months, and the defect liability period is 24 months, * * 78 months. The central laboratory of Xiamen-Zhangzhou sea-crossing bridge is a third-party testing institution with independent legal personality entrusted by the owner, which is engaged in and manages the testing work of this project, undertakes the testing work of the owner and the supervision unit entrusted by the owner, and obeys the unified management of the owner. This management mode of introducing third-party testing is the first management innovation in Fujian Province. In the past two years, I personally think that there are many experiences that can be summarized and used for reference. This paper introduces the management and operation of Xiamen-Zhangzhou Bridge test, and puts forward some suggestions for the reference of Quanzhou Bay Bridge owners.
First, participate in building the relationship between all parties.
1, the working relationship between the central laboratory of Xiamen-Zhangzhou sea-crossing bridge and the construction parties.
2, the relationship between the testing and testing institutions and the construction unit
The relationship between the construction unit (owner) and the test and testing institution is entrusted and entrusted. Entrusted by the owner, the testing organization shall perform the duties stipulated in the contract, set up a central laboratory, and be responsible for related work; The owner is responsible for the inspection, appraisal, daily supervision and coordination of the central laboratory, and verifies its contract fees and payments.
3, the relationship between testing institutions and supervision work
The relationship between testing institutions and supervision units is cooperative, independent and parallel. The supervisor can supervise the whole process of sampling and test operation in the central laboratory and confirm the original data.
4. The working relationship between the testing institution and the construction unit
(1) The testing organization and the construction unit are independent and equal in testing and being tested. At work, the test and testing organization is entrusted by the owner to test the quality of the engineering entity undertaken by the construction unit according to the notice of the director's office and the contract terms, test and testing specifications and design drawings of the engineering construction.
(2) The construction unit shall actively cooperate with the testing and testing institutions. If there is any objection to the results of the test report, a third-party test and testing institution with corresponding qualifications can be hired for re-testing and the test report will be submitted to the owner for arbitration. However, before the arbitration by the owner, the test report of the test and testing institution shall prevail, and the supervision procedure shall be followed.
Second, the job responsibilities interface division
1. Positioning of the central laboratory of Xiamen-Zhangzhou Cross-sea Bridge: As a third-party testing organization independently invited by the owner, it belongs to the field laboratory category and is responsible for the testing work of the owner and supervisor of Xiamen-Zhangzhou Cross-sea Bridge project. Its work includes the whole process of field sampling, testing and testing according to the test requirements put forward by the owner or supervisor (i.e. notice of testing and testing) until the test report is issued and suggestions are made according to the test report. The central laboratory and the director's office have a parallel relationship of mutual supervision. The project, content and frequency of the test are determined by the test notice of the supervision unit, and the supervision tester can stand by and confirm the test results. The site laboratory of the construction unit shall accept the supervision and management of the supervisor. The central laboratory belongs to the supervision category and is entrusted by the owner to be responsible for the supervision (or owner's) test and detection of this project.
2. The test report of the central laboratory is the basis for the owner and supervisor to judge the project quality. If the construction unit has any objection to the test report, it can hire a third-party testing organization with corresponding qualifications to re-produce the test report and report it to the owner for arbitration. Before the owner makes arbitration, the test report data of the central laboratory shall prevail. In case of any dispute between the construction unit and the central laboratory on the test results, it shall be implemented in accordance with Article 27 of the Administrative Measures for Test and Detection of Highway and Waterway Engineering in Fujian Province (J [20xx] 184No.), that is, both parties shall conduct the test by re-sampling. If the re-inspection results are still obviously different, the project owner may entrust a test and inspection institution with traffic qualification to conduct the inspection, and the inspection expenses shall be borne by the owner.
3. The temporary qualification of the central laboratory shall be examined and approved by the owner and submitted to Fujian Provincial Traffic Quality Supervision Station, and the selection and entry of raw materials shall be examined and approved by the supervisor. When unqualified samples or abnormal data are found, the supervision unit shall issue a notice of unqualified inspection items and supervise the implementation of rectification.
4. The parent laboratory of the successful bidder shall supervise and manage the central laboratory, the rules and regulations of the central laboratory, the management measures, and the aging table of the testing cycle. It should be fully implemented in the form of test implementation rules.
5. When there is a quality dispute between the supervision unit and the construction unit, the owner entrusts the testing organization to provide real and effective test results as the basis for the owner's arbitration.
6. The test supervision engineer shall deal with the daily management and qualification audit of the construction unit's site laboratory, and supervise and guide the equipment functions, personnel and their qualifications, operation methods and data management.
7. The test supervision engineer can stand by and sign the test results of the central laboratory during the whole test.
8. The test supervision engineer shall strictly control the sampling inspection frequency of the construction site according to the relevant provisions of the tender documents. The testing items and frequencies other than routine testing shall be entrusted to the central laboratory for testing after obtaining the consent of the owner.
9. The test supervision engineer may require the off-site emergency testing, important parts, suspicious sampling and other test processes, and the central laboratory shall notify the test supervision engineer to conduct on-site inspection before the time specified in the test. If the test supervision engineer fails to conduct on-site inspection, the test results shall be deemed to be accepted.
10, the supervision unit is responsible for the collection and archiving of archives completion data, and the test and testing institution is responsible for providing test and testing reports and related materials.
1 1. The owner authorizes the central laboratory to do the following work:
(1) inspect and guide the site laboratory of the construction unit at a certain frequency;
(2) The central laboratory designated by the Owner shall complete the sampling inspection of the contractor;
(3) Take the test results as the arbitration basis for quality disputes between the supervisor and the contractor;
(4) Participate in reviewing the quality evaluation data of the completion acceptance;
(5) Propose a test scheme to meet the needs of bridge construction quality control;
(6) Review the quality of main materials and the test data of raw materials and mixtures declared by the construction unit.
Third, the project test frequency
1. On the premise of ensuring the coverage rate of incoming inspection items is 100%, conduct spot checks according to the frequency specified in the inspection contract or the requirements of the owner.
2, supervision units, central laboratory, construction units should strictly implement national and industry standards, norms, procedures, in accordance with the "Fujian Province Expressway Engineering Test Items and Frequency Summary" to carry out the test work.
Year-end summary of third-party testing 3 I. Work harvest
In the past few months, as an experimenter, I have carefully studied the company's quality management control process, and according to the requirements of my job responsibilities, I have the following main gains:
1, sampling and storage of raw materials
I strictly follow the management requirements of the company and don't miss a lot. Understand the physical and chemical properties of various raw materials and store them reasonably.
2. Specimen inspection
Experimental inspection is a fine inspection process. "Details determine success or failure". I do every experiment well with a rigorous working attitude during the experiment. At present, I have mastered the inspection methods and steps of all raw materials. Thanks to my master and my colleagues, you taught me this.
3. Data processing
When recording data, I record, summarize and report every experimental data based on the principle of "seeking truth and being pragmatic". Make no mistakes and make false reports.
Second, feelings and experiences.
1, attitude is everything.
You must be meticulous in your work. You can't always make mistakes. If necessary, check the results of your work to make sure that your work is foolproof. After work, we should always sum up work experience and lessons, constantly improve work efficiency and sum up work experience. Although I will make some mistakes in my work and be criticized by my leaders, I don't think this is a shameful thing, because I think these mistakes and criticisms can help me avoid similar mistakes in my future work and make me grow faster in my work. During working with you, I was deeply impressed by their rigorous and serious work style, and I also learned a lot from them that I lacked.
2. Be diligent in thinking
The daily work of the post is complicated and boring in a few days, which requires us to be diligent in thinking, improve working methods, improve work efficiency and reduce working hours.
3. Keep learning
I should constantly enrich my professional knowledge and skills, which will make my work more handy.
If a person wants to make a difference in his post, he must be familiar with the professional knowledge of the post and broaden his knowledge in continuous learning. I am like a blank sheet of paper. I just entered the company and said nothing. Up to now, the handwriting on the paper is neat. Leaving school, my unit is Class Two. There is no end to learning, and work is another way of learning. After several months of laboratory study, I have now reached the working level of a regular employee.
Third, its own shortcomings.
1. Occasionally I will make mistakes in my work because of carelessness, which will bring unnecessary trouble to my work. In the future, I will finish my work seriously with a rigorous working attitude.
2, because of personality reasons, others are not active enough. In order to complete the work more perfectly in the future, I will take the initiative to communicate with my leading colleagues. I hope to learn from them what they can't learn in textbooks through conversation.
Since I left school and stepped into this historical stage, I feel this society is very strange for the first time. Whether it's work or interpersonal relationship, everything is very difficult for me, a novice. After these months of baptism, I really grew up a lot.
The end of 20xx year and the arrival of 20xx year are both the beginning and the end. What is displayed in front of me is a fertile ground for me to gallop, and I clearly feel the heavy responsibility. In my future work and life, I will continue to study, practice in depth and constantly improve myself. I will live up to the opportunities and leadership given by the company and the training of my colleagues. I will grow with the company.
Year-end Summary of Third-Party Testing Since April, under the requirement of "Notice on Carrying out Large-scale Competition Activities to Ensure Safety, Quality and Promote Production and Labor" put forward by Gan Qing Company, our monitoring station has also made timely arrangements and arrangements, and the leading group has guaranteed all substations to ensure the effective completion of the planned tasks. This makes me take the initiative to call on myself to adjust my work plan according to my work characteristics, complete my work seriously and efficiently, as well as the specific completion situation and next month's plan.
I. Work completed this month:
1 according to the work requirements of Zhangye headquarters, establish and report the problem database of mixing station and laboratory every month, conduct routine inspection of 1# concrete mixing station, issue a notice of on-site inspection together with site supervisor Li Pingping, and make rectification under the supervision of site supervisor. I reviewed it myself, so that I can not only familiarize myself with the problems, but also familiarize the corresponding specific responsible persons with the existing problems and how to rectify them to avoid similar problems from happening again.
2. In view of the current owner's concern (flash butt welding of steel bars in beam yard), contact the laboratory of supervision center in time to increase the sampling frequency, and all the results are qualified. Site supervisors are required to pay attention to appearance quality, especially to check whether there are cracks at the joints. The axis deviation of the joint should not be greater than 0. 1 times the diameter of the steel bar, and should not be greater than 2mm. Flash butt welding should have proper upsetting height and uniform metal burr.
3. Organize on-site supervision engineers (Chen Gang, Cheng Liqi, Xia Lian, Niu Weiguo) to inspect the quality of piers and box bridges crossing the perimeter, especially to re-examine and mark the cracked piers and abutments constructed in 20xx and 20xx, and establish inspection summary tables in time for later re-survey.
4. Under the organization of Zhangye headquarters, the same substation will inspect the beam field mixing station, central laboratory, 1# concrete mixing station and the first site laboratory, and carefully record the problems raised by the inspection, arrange the problems to the site supervision in time and correct them in time. The main problems involved in supervision are that the construction site in the application form of mortar mixture ratio is not clear, the on-site subgrade protection and maintenance are not timely, and the thickness does not meet the design requirements.
Second, the problems existing in this month's work:
The supervision of the mixing station is not in place, the standardized construction inspection is not meticulous, especially the supervision of our substation supervisors in each mixing station is not meticulous, which leads to the failure to maintain the subgrade protection specimen in the second work area so far, and the construction site in the notice of mortar construction ingredients in the first work area is not clear.
Third, your work plan for next month:
1. In accordance with the spirit of "Notice on Carrying out Labor Competition Activities to Ensure Safety, Quality and Promote Production" proposed by Gan Qing Company, actively organize their own work, serve the site, and cooperate with the supervision station, substation and site supervisors to complete the planned supervision work.
2. According to the information and data provided by on-site supervisors, arrange substation testers to test the compactness of graded macadam in bed surface and recheck the transition section. At present, it is mainly used for the construction of graded macadam in the second work area.
3. According to the work plan, conduct an in-depth inspection of the source of the gravel, check the production situation of the source of the gravel, understand the current unstable mud content of the gravel, and ask the construction party to coordinate and solve it. The sub-station laboratory will increase the sampling frequency and track the stability of material quality.
4. The welding of Mingshui Bridge and normally bright steel bars will continue to be sampled and tested according to frequency, so as to control the real welding quality and ensure the quality and quantity.
5. At the beginning of the month, sample all the raw materials of each mixing station, prepare for the credit evaluation in May in advance, prevent unqualified raw materials from entering the site, and urge the supervisors of the mixing station to witness the vehicles.
The work is basically in a virtuous circle, guiding everyone's cooperation ability, actively helping to solve problems on the spot, and checking the implementation of the annual inspection plan and the frequency of inspection, especially raw materials. Take the initiative to participate in various meetings, understand others' summaries of their own work, often draw inferences from others, improve their work and avoid mistakes.
Year-end summary of third-party testing 5 Since I have been engaged in highway engineering testing, I have done all kinds of testing work conscientiously, worked hard to complete the task, earnestly studied all kinds of test operation procedures, construction technical specifications and quality standards, and extensively read relevant professional books to improve my theoretical level and professional technical business ability. After years of unremitting efforts, my business level and professional skills have been continuously improved, and I have grown from an ordinary test inspector to the person in charge of the test work. The experience and understanding of many years of test and detection are summarized as follows:
First, professional books and reference books are theoretical sources and work guides.
For many years, I have always adhered to a belief that if you want to master the skills of experimental testing, you must attach importance to the study of theoretical knowledge. First of all, we should learn the test regulations, master the working essentials and procedures, and understand the test principle, so as to better carry out the test and detection work. This book is a guide to our testing and testing work. Secondly, we should learn the construction technical specifications and quality standards, and make clear the test contents, quality control and evaluation standards, which are the basis for us to judge the test results.
Second, frequent and in-depth practice is the way to personal growth.
Only by adhering to the road of integrating theory with practice and applying the learned knowledge to the practical work of experimental detection can we better guide our work and enrich our knowledge. Only through long-term efforts and practice can we consolidate, digest and absorb the theoretical knowledge we have learned, constantly enrich and improve our professional and technical level, further correct the wrong understanding and practices in our work, and grow faster. Years of work experience has proved this.
Third, apply the knowledge learned to guide the test and detection work and highway engineering construction, and correct the wrong understanding and practice in practical work.
1. Some construction units don't do bearing ratio test when testing the crushed stone materials on subgrade and cushion, and think that the strength of natural crushed stone is much higher than that of ordinary filler, so it is unnecessary to do bearing ratio test. In fact, this is a wrong understanding and practice, because natural gravel contains not only large-size gravel particles with high bearing capacity, but also some fine-grained soil with low bearing capacity. Its overall bearing capacity is determined by the above two factors and their gradation composition. Whether it meets the construction technical specifications and design requirements is unknown, and it needs to be determined by bearing specific strength test.
2. Some construction units and even construction projects do not do the delay time test of cement stabilized material mixture in the construction and test of pavement cement stabilized base, but only take the setting time of cement as the final rolling time of mixture for construction control. This practice is also incorrect, because the setting time of cement is only an important factor affecting the delay time of mixture, and the type and quality of materials are also important factors. The longer the delay time, the greater the density and strength loss of the mixture. A large number of simulation tests and construction practices have proved this point, so it is particularly important to conduct delay time tests and choose a reasonable delay time. Of course, it is also important to choose cement with long setting time and good material. These will not be described one by one. Whenever the above situation is found, make suggestions or correct it.
Four, actively adopt new technologies, new materials and new processes in highway test and construction, and achieve satisfactory results.
1. For example, we adopted the mixing technology of "secondary feeding method" in the mixing of concrete mixture, that is, the shell-making technology. By adjusting the feeding sequence, the workability and mechanical properties of concrete mixture are significantly improved. The construction practice shows that the slump of concrete mixture is increased by about 5%, the early strength is increased by 8% ~ 12%, and the 28-day compressive strength is increased by 15% ~ 25%. The cast concrete structure has high surface smoothness and good compactness.
2. For example, we used concrete mixed with fly ash in the concrete pouring of underwater large-diameter piles and caps. The construction practice shows that not only the workability of concrete mixture has been significantly improved, but also the cast concrete structure has smooth surface, no shrinkage cracks and high later strength.
Verb (abbreviation of verb) understands and recognizes the significance and urgent need of test and detection.
1. Highway test and detection is a tedious, rigorous and highly scientific work, an important means of engineering quality guidance, inspection and control, an important basis for engineering quality evaluation and an important guarantee for engineering quality. Therefore, it is an urgent task to ensure the timeliness, accuracy, reliability and seriousness of test data and cultivate a high-quality test team.
2. The road test requires that each tester should not only have basic theory and professional knowledge, but also have a scientific, rigorous, serious and responsible working attitude, and must not be careless and slack. In particular, the person in charge of the test must have rich professional knowledge, high theoretical and technical level, and strong ability to analyze, judge and solve practical problems. To this end, each of our testers should constantly strengthen their professional study, strive to improve their own quality, effectively improve the level of test detection and work quality, provide authentic, effective, accurate and reliable test detection data for highway engineering construction, and promote the continuous improvement of engineering quality.
VI. Direction of future work
Looking back on the course I have traveled over the years, I have both successful experiences and failed lessons. I deeply realize that knowledge is endless, learning is endless, and technology is endless. My professional quality and technical level need to be further improved. To this end, I will strengthen my study, work hard, sum up seriously, improve constantly, and make new contributions to highway construction in China.
;