First, the desktop drinking machine cleaning method
1. Unplug the power plug and take out the bucket. Remove all residual water from the inner cavity of the water dispenser. Because the residual water in the drain pipe of the drinking machine is the key to the secondary pollution of the drinking machine, it is necessary to open the drain pipe behind the drinking machine to discharge the residual water, and then turn on all the drinking switches to discharge the residual water in the drinking machine cavity.
2. Hold the sterilized alcohol cotton ball with clean tweezers and carefully scrub the "smart seat" of the water dispenser. Usually, these parts of the water dispenser are in direct contact with the air, which is easy to breed bacteria. Scrubbing with sterilized alcohol cotton can not only remove the dirt on it, but also prepare for the next disinfection.
3. Generally, the cavity capacity of household drinking fountains is about 2000ml, so 300 ml of disinfectant is dissolved in about 2000ml of water, and then the whole cavity is filled. 10- 15 minutes later, turn on the water dispenser including the sewage pipe and the drinking water switch, and discharge the disinfectant.
4. Rinse the whole cavity of the desktop water dispenser continuously with 7000-8000 ml of clean water, then turn on all switches to discharge the rinsing liquid.
5. Scrub the back wall of the faucet switch of the desktop water dispenser with sterilized alcohol cotton.
6. Because the water dispenser has just been disinfected, there may be a small amount of disinfectant residue, so you can't drink it right away. You should pick up a glass of water first and smell the disinfectant. If there is, you need to keep putting water into it until there is no smell in the water before you can drink it safely.
Experts suggest that drinking fountains should be cleaned at least once every two months and once a month in summer.
The cleanliness of the desktop water dispenser is directly related to the drinking health of the whole family, so Bian Xiao suggested that it must be cleaned and maintained regularly to ensure that the water you drink is clean and healthy!
Second, the desktop drinking machine cleaning matters needing attention
There are three main problems with desktop drinking fountains. First, the boiling temperature of water is not enough. The highest temperature of most water dispensers is 95 degrees, and the reboiling temperature is 90 degrees, so the sterilization temperature of tea leaves is not enough. Second, the warm water of the drinking machine is repeatedly heated to form the so-called "thousand boiling water", so that trace elements and minerals in the water accumulate to form insoluble particles; Third, it is difficult to clean the inside of the water dispenser, and it is easy to accumulate scale and breed bacteria.
1, the water dispenser can heat, cool and drain water, so there is no problem with the water dispenser.
This only shows that there is no problem with the use function of the water dispenser. Because it involves human health, drinking fountains need regular maintenance (disinfection and cleaning).
2. Wash it with detergent often, and it will be clean.
Testing the drinking machine with detergent or other cleaning agents only cleans the surface of the desktop drinking machine. The core components of the drinking machine that really involve water are the hot water tank, the cold water tank and the connecting pipes hidden inside the drinking machine. These are the places that are really easy to produce sediments and breed bacteria and viruses.
Soaking and washing with boiling water can kill bacteria and viruses.
Soaking and washing with boiling water can only kill a few bacteria, so it is necessary to use a special disinfectant for drinking fountains with strong pertinence, and there are strict regulations and requirements on its dosage and soaking time. It is best to use ozone disinfection.
4. Before cleaning, it is found that there is peculiar smell or foreign body in the water.
Under normal use, desktop drinking fountains are based on the quality of drinking water. 2-3 months should be thoroughly disinfected, descaled and cleaned again.
5. Water supply stations or barreled water plants have free cleaning (traditional tablet cleaning), so you can sit back and relax.
Traditional drug cleaning methods can not achieve the effect of descaling and disinfection. Generally, manufacturers use water delivery personnel to clean, without professional training and professional desktop drinking machine cleaning equipment, which will cause secondary pollution to the drinking machine.
Third, how to choose a desktop drinking fountain
Choose a style
There are two kinds of drinking fountains: desktop and vertical. You should choose a style that suits your home or company. There are no hard and fast rules in this respect. It depends on your own use and preference.
Selection mode
There are many models of drinking fountains at present. Of course, there are three basic modes, one is hot water, the other is cold water and the other is warm water. Therefore, you can choose the mode. Of course, the basic mode of the water dispenser is to contain hot water and cold water.
Select size
The sizes of drinking fountains are all different. And when we put bottled water, we should also choose whether you want to use a small bucket or a large bucket. Also consider the location of the home and the cooperation with the home.
choose a colour
Generally, drinking fountains are white, but there are other colors. In fact, the white one depends on whether it is consistent with your overall home style. If not, you might as well buy other colors that match your style.
Material technology
Different processing materials or different processing technologies will lead to different quality and service life of drinking fountains. Therefore, when choosing, we should be optimistic about the material and processing technology of the water dispenser. Imported products are good, but the warranty is difficult.
sterilizing effect
We should be optimistic about whether the water dispenser has sterilization effect. Some were sterilized, but they weren't. If the water dispenser does not have a good sterilization effect, the secondary pollution caused by it will be very serious.
Price positioning
According to one's economic ability, choose a water dispenser that suits one's affordability. Of course, in fact, one-time investment is still better. Personally, I suggest a higher purchase price.
after service
When choosing a water dispenser, you should choose one with good after-sales service. If you choose a bad manufacturer, there will be problems and it will be very troublesome to change parts.
When the water dispenser pours water, it will bring in many bubbles, which will carry some bacteria into bottled water. On the other hand, if the inside of the water dispenser is used for a long time without cleaning, dirt will deposit in the water storage tank, waterway and water outlet, and a large number of bacteria will also breed. Therefore, after a period of use, drinking fountains must be cleaned, disinfected and descaled regularly to ensure people's healthy life. Only when the desktop drinking machine is thoroughly cleaned can we ensure the health of our drinking water and drink it safely.
Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~