2. At this point, the Organization Chart tab appears on the tab. You can adjust the established organization chart here.
Method 1: Drag and drop changes directly with the mouse.
1. Click the left mouse button to select the structure diagram, and eight points will appear around the screen.
2. Click any of the eight points with the mouse. Don't let go of the mouse, just pull it to change the size.
Method 2: Cutting
1. Click the mouse to select the structure chart, and the picture structure chart editing bar will appear. Click the crop button.
2. After clicking, eight crop buttons will appear. Click to select them.
3. Click the cut button and hold down the mouse to cut the structure diagram. Note: Hold down the ctrl key to move in four directions. The content in the dotted line is reserved.
Method 3: Set the object size
1, select structure diagram, select format-set object format.
2. Select size-change the height and width of the structure diagram. If you need to set the height and width, unlock the aspect ratio. When you are finished, click OK.
Method 4: Set the clip.
1. Select structure diagram, choose format-set object format.
2. Select Structure Diagram-Cutting-Enter the quantity to be cut in the top, bottom, left and right options, and click OK when finished.
How to use the figure 1 in wps? Open wps, click Insert in the toolbar above, and a list of insert tools will appear below Insert.
2. Find and click "Diagram". In the pop-up online icon, click "Insert" in the lower right corner of the free and favorite relationship icon, and the icon will be inserted into the wps page.
3. After the online icon is downloaded, the download prompt will disappear automatically, and the map will automatically appear in the wps page.
4. Insert the chart successfully, so that you can use it.
How to make logic diagram tool in wps: wps
step
Run WPS demo to create a new blank slide, click the "Text Box" button in the "Drawing" toolbar, drag the mouse on the slide to draw a text box, and enter the related words "Rich and varied emotions".
Press the "Ctrl" key to drag the text box to the appropriate position, then let go, quickly copy the remaining 1 1 text boxes, and replace the contents in the text boxes with related contents.
Press the key combination to select all text boxes, and adjust the font, font size and color of the text in batches.
Select the first text box and move the mouse to the control point in the middle of the right. When the pointer changes to a double arrow (as shown in Figure 6), press the left key and drag to the left, so that the text in the text box is displayed in a vertical column.
Roughly adjust the width and position of other text boxes (as shown in Figure 8). To make the related text boxes orderly arranged, you need to call up the alignment or distribution toolbar: click the drawing/alignment or distribution command in the drawing toolbar in turn, move the mouse to the ""at the top of the lower menu, and when the mouse pointer changes to a cross arrow (as shown in Figure 9), hold down the left button and drag to call up the alignment or distribution toolbar.
Drag the mouse to select the seven middle text boxes, and then click the Align Left and Distribute Vertical button in the Align or Distribute toolbar (as shown in figure 1 1) to make the seven text boxes equally spaced.