Forklift truck safety operation specification:

1. Check before driving;

2. When you meet someone in front while driving, you should signal 5 meters away;

3. The speed in the factory shall not exceed 15 km/h, and the speed in other complex areas such as factory doors, elevators, bends, crowded people and narrow passages shall not exceed10 km/h;

4. When driving, the low point of goods should be 0.3m ~ 0.4m from the ground.

5. Don't turn too fast to prevent the tendency of "turning at will";

6. Up and down the ramp should drive slowly and at a constant speed, and no turning is allowed on the ramp;

7. Don't drive over the slope. When the slope is greater than 10%, you should reverse when going downhill.

8. Forklift personnel should take reversing action when they move forward with larger or heavier goods blocking the driver's sight.

The "Eight Prohibitions" should be observed in the operation:

1. No single fork operation;

2. Long-distance driving of goods is not allowed;

3. Forks are not allowed to pick pallets to pick up goods;

4. It is not allowed to shovel dangerous chemicals such as chemicals and inflammables directly with a fork;

5. Inertia force is not allowed to receive goods;

6. It is not allowed to exile round or easy-to-roll articles with braking force;

7. It is forbidden to bring people to work on the pallet or fork, and it is forbidden to stand under the fork after it rises;

8. It is not allowed to drive horizontally on the inclined road surface.

Start:

1. Before starting, observe the surroundings, and after confirming that there are no obstacles that hinder driving safety, whistle before starting.

2. For vehicles with hydraulic (pneumatic) braking, the brake hydraulic (pneumatic) meter must be safe before starting.

3. When the forklift truck starts loading, the driver should first confirm that the loaded goods are stable and reliable.

4. Start slowly and slowly.