The average salary of NC programming is 5097 yuan/month, the minimum salary is 2000 yuan/month, and the maximum salary is 16000 yuan/month.

There are two main points of NC programming: manual programming and automatic programming. There are fixed overtime hours, dress conditions and team activities every week, and there are also experience requirements for working years.

Extended data

Job requirements:

1. For the external R angle less than 0.2 on the main electrode of the appearance surface, add a partial enlargement when tabulating, and indicate that this R angle is manually omitted. ?

2. In view of the complexity of the back die cover, sometimes the electrode will encounter a small rotten surface when it is removed, and the interference body may not be generated during interference inspection. Therefore, the bottom surface of the electrode should be transparent to check whether there is interference. ? 9? Modification of new mold: In the case that the electrode list has been programmed and the electrode has been made by CNC, if it is necessary to cancel the electrode or replace the electrode list, please follow up by yourself. ?

3. After the electrode is removed, please give the original tube a list of copper sizes, and cut the material for the warehouse in time to avoid waiting for cutting time during NC machining. ?

4. Do all steels use LYC(ELE)? Machining module: LYC(CU) machining module shall be used for the electrode, and the electrode number shall be engraved on the electrode, such as N66-CAV-0 1F(R). Note: electrode number band? f？ For a beautiful men's belt? R is rough, don't change this module at will. ?

5. When processing steel, the absolute coordinates must be taken from the top or top of the workpiece, the middle of four sides or the bottom of one side. Irregular, oversized or smaller workpieces must be marked according to the actual situation to avoid machining errors.