Current location - Education and Training Encyclopedia - Education and training - On-site safety training content
On-site safety training content
Safety education is an important link and foundation of safety management, and the safety education for workers entering the site is carried out in accordance with relevant regulations and combined with the actual situation of the construction site.

1. Employees who participate in the production of this enterprise should love their jobs, study hard, improve their political, cultural, professional level and operational skills, actively participate in various safety activities, put forward a thing to improve safety production, and do a good job in safety production.

2. Abide by labor discipline, obey the command of leaders and safety inspectors, concentrate on their work, stick to their posts, and do not engage in non-type work without permission; It is forbidden to go to work after drinking.

3, strictly implement the operating procedures (including safety technology operating procedures and quality operating procedures, etc. ) shall not be illegal command and illegal operation; Have the right to refuse the instruction of illegal command, and have the responsibility to stop others from illegal operation.

4. Obey the command of the team leader and site construction personnel, obey the distribution, unite as one, and jointly complete the production task.

5, the correct use of personal protective equipment, enter the construction site must wear a helmet, fasten the hat belt; Don't wear slippers, high heels or go to work barefoot; Don't wear shoes with hard soles and nails, which are easy to slide to the sky.

6. Various construction facilities on the construction site, such as "four ports", "no edge" protection, one map and five targets, safety signs, warning signs and safety regulations. , shall not be removed or moved at will, and shall be moved only with the consent of the person in charge of the on-site construction personnel.

7. Don't joke and play in the workplace to avoid accidents.

8. Children are not allowed to enter the site, and vendors are not allowed to enter the site to sell their hearts.

9. Non-operators are not allowed to use on-site power switches, wires and various mechanical equipment.

10, personal protective equipment should be worn during the construction of hand-held power tools, and the power cord should be overhead.

1 1. Anyone who suffers from hypertension, heart disease, anemia and other diseases unsuitable for working at heights shall not engage in working at heights.

12. Before climbing, check whether the tools to be used are in good condition, and put the tools carried by the operation in the tool bag for easy access when necessary. Before operation, check whether the operation site is safe, whether the roads are smooth and whether the protective measures are perfect. After the work is completed, all used tools should be taken back to avoid falling and hurting people.

13. When working at heights, tools, materials, etc. are not allowed to be thrown up and down, and it is not allowed to operate at heights. If it is really necessary to cross up and down, effective isolation measures must be taken.

14. Safety belts must be worn when working at heights, cliffs and steep slopes without protective facilities.

15, when encountering bad weather and the wind force is above 6, the open-air operation at high altitude should be stopped.

16, climbing operation should be from the designated ramp or escalator up and down, it is forbidden to use ropes to climb scaffolding poles up and down.

17, walking on high places or scaffolding, don't look around; Don't lean against the railing, let alone sit on the railing and have a lunch break on the scaffold.

28. The site materials should be neatly stacked and stable, and the materials and semi-finished products should be handled from top to bottom, not from bottom to top or from the middle, so as to avoid injury and damage accidents caused by falling piles.

29, all internal frame erection must be strong, can not have probe plate (probe plate one end out of the bar length is more than 20cm without probe plate), and shall not use 5 x10 template as probe plate, only a small amount of materials and single operation are allowed on the frame.

20, high homework are not allowed to use brick pad elevated slate, also are not allowed to stand on the shelf pad turned.

2 1, it is forbidden to throw from high to low, so as not to cause flying drop.

22, temporary barrack are not allowed to be used in the electric furnace, kerosene stove, are not allowed to be any stove.

23, fire equipment, appliances, sand, fire water, etc. Do not use it for others or transfer it.

24, night construction should have enough lighting, lighting lamps and lanterns should be high, indoor not less than 2.4 meters, outdoor not less than 3 meters, lines should be overhead, wire insulation is good, lamps and lanterns shall not be hung or tied to a metal frame.

25. The lighting lamps used in temporary sheds and dormitories shall be 60 watts according to the Regulations on Electric Light Fire Control.

36, work in flammable and explosive places, it is forbidden to open fire, smoking, etc.