1. Energy consumption self-inspection report
In order to promote energy conservation in public institutions, improve the efficiency of energy utilization in public institutions, and promote energy conservation in township public institutions according to law, members of the leading group for energy conservation in township public institutions formed an energy conservation performance self-inspection team to conduct self-inspection on the performance of the township. Self-inspection of performance shall be conducted in the way of "listening, checking and evaluating": listen to the energy-saving work report of public institutions, verify it, and score it item by item according to "Performance Appraisal and Scoring Standard for Energy-saving Work of xx Rural Institutions". The self-examination is as follows: 1. Organizational leadership: able to manage organizations and employees; Incorporate energy-saving work into the annual work plan and study and deploy it in time.
2. Publicity and training: able to make publicity and training plans; Learn energy-saving knowledge; Organize energy-saving publicity activities twice a year.
3. Energy-saving planning: the energy-saving planning of public institutions can be compiled and implemented on an annual basis; Energy conservation planning and implementation plan shall be reported for the record within the specified time; Make annual energy-saving plans and implementation plans and organize their implementation.
4. Energy consumption statistics: you can designate a special person to be responsible for energy consumption statistics and establish an energy consumption statistics account; Submit statistical data of energy consumption within the specified time; The data is true and accurate; Complete the project report; Participate in energy consumption statistics training as required.
5. Establish a liaison system: be able to define liaison officers, establish a liaison system, and clarify work responsibilities; Attend working meetings on time and put forward energy-saving measures and suggestions; Work information exchange. Three pieces of valuable information.
6. Energy-saving management: energy management posts can be set up and the post responsibility system for energy management can be implemented; Establish and implement an energy audit system; Formulated an energy-saving procurement management system.
7. Vehicle fuel consumption management: it can improve the management system of official vehicles; Formulate energy-saving driving norms, seal up and stop driving, refuel at designated points, maintain at designated points, and insure at designated points.
8. Power consumption management: the power-saving system can be formulated and improved; Actively promote the use of efficient and energy-saving lighting products; Optimize the design of lighting system and improve the circuit control mode; Adopt energy-saving stoves and equipment.
9. Water management: able to formulate and improve the water-saving system; Adopting water-saving appliances and equipped with water-saving equipment; Maintenance and management of water equipment; There is no "leakage" and tap water directly washing mops and vehicles all year round.
10. Office supplies management: We can formulate and improve the system of purchasing, equipping and receiving office supplies, and actively use low-energy and environment-friendly office facilities.
1 1. supervision and inspection: self-inspection methods or standards for energy-saving performance can be formulated; Regularly carry out special supervision and inspection of energy conservation, reward and punishment publicity.
Inform the final results of self-examination on energy-saving performance of public institutions, and select advanced units and individuals in energy-saving work of public institutions; Criticize those who fail to meet the assessment standards or waste energy seriously, make corrections within a time limit and make a written report to the township government within one month and submit a rectification plan. The energy-saving work of township public institutions is fully included in the self-inspection of township government performance, accounting for a certain percentage of the score, and quantitative assessment is implemented. The results of self-examination serve as an important basis for township governments to evaluate the achievements of leading bodies and departmental leading cadres of public institutions.
2. Energy consumption self-inspection report
Over the past xx years, the company has achieved certain results in saving energy, reducing consumption, tapping potential and increasing efficiency through a series of positive measures. The energy-saving work for the whole year is summarized as follows: 1. Strengthen the leadership and management mechanism and pay close attention to energy conservation and emission reduction.
Company leaders regard energy conservation and emission reduction as the top priority of the enterprise, and often hold special meetings to study energy conservation and emission reduction; The company has identified a competent leader who is responsible for energy conservation and emission reduction; Established energy consumption reduction standards, unified electrical equipment standards for each pit, and implemented the target responsibility system for environmental protection, energy conservation and emission reduction; For plant selection and production units, energy saving, cost control and monthly wage distribution are closely linked, and rewards and punishments are clearly defined.
Second, strengthen power management and reduce power consumption.
Since xx, the company has carried out reactive power compensation for transformers at various production outlets, and the power factor has been improved a lot, from about 0.8 to more than 0.9 now. Reward the company's electricity fee adjustment every month, which reduces the cost and increases the company's benefit. At the same time, the company forcibly eliminated the split compressor with high power consumption, high noise and backward technology, and equipped a series of large-scale equipment such as new frequency conversion screw energy-saving intelligent air compressor and pump. In the past, a mining equipment cost more than 90,000 yuan in electricity every month. After updating the intelligent energy-saving equipment, the electricity bill is about 60 thousand yuan, which is greatly reduced. It not only reduces the power supply pressure of Sanjun Line, but also improves the efficiency of electricity consumption, and at the same time reduces the waste of manpower and material resources, achieving a win-win situation with the labor construction team.
Third, strengthen process operation management and strictly control key links.
According to the actual situation of the company, grasp the key links of energy saving and emission reduction, mainly including the following aspects:
1. Strictly save electricity and strengthen the management of electrical equipment. Each workshop arranges professional patrol personnel to maintain and manage the equipment, which reduces the mechanical loss of the equipment and plays an important role in prolonging the service life of the equipment and reducing the power consumption of the equipment.
2. Strictly control the index of consumables, strengthen the energy-saving knowledge of workshop operators, improve process parameters, promote the full use of chemicals, improve efficiency, reduce the emission of harmful substances and improve environmental pollution.
Four, strengthen the statistical analysis of energy, timely feedback.
Adopt scientific statistical methods to ensure the accuracy of energy data, make a monthly energy consumption cumulative table, make an energy consumption analysis report of the company's main products through the comparison of "monthly indicators" and feed it back to all energy-using units, and arrange special personnel to fill in the energy utilization report on time.
Problems existing in verb (abbreviation of verb) energy-saving work and energy-saving measures to be taken
The energy-saving management system is not perfect, and the energy-saving incentive and restraint mechanism is not refined. The company's energy-saving management can't meet the development needs of energy-saving work in terms of organization setting, staffing and funding guarantee, and it is difficult to mobilize the enthusiasm and creativity of all aspects of energy-saving work, and the overall energy-saving work is still in a passive state. Energy conservation has a long way to go. In the future, we will continue to strengthen energy-saving publicity, organize relevant personnel to do energy-saving skills training according to work characteristics, establish and improve the company's energy management system and management mechanism, and make new contributions to promoting the company's all-round development.
3. Energy consumption self-inspection report
I. Progress of objectives and tasks In the first three quarters, our bureau strictly implemented various energy-saving indicators such as electricity-saving, water-saving and fuel-saving, and achieved the goals of comprehensive energy consumption per capita, a 3.2% year-on-year decrease in water consumption per capita and a 2.5% year-on-year decrease in energy consumption per unit construction area.
1. electricity consumption: in the first three quarters, the electricity consumption was 54,742 kwh, and the electricity charge was 47 1 1.7 million yuan.
2. Water consumption: in the first three quarters, the water consumption was 20.36 million cubic meters, and the water fee was 0.410.97 million yuan.
3. Fuel consumption: In the first three quarters, the fuel consumption was 23,400 liters, and the fuel cost was178,200 yuan. This year, the fuel consumption of official vehicles 1 1 vehicle reached the standard, and the fuel consumption of each vehicle was 240 liters per month, achieving the goal of a year-on-year decrease of 4%.
Second, the specific practices
1, do a good job of energy and resource consumption statistics. Statistics shall be made once every quarter, including the number of energy users, building area, consumption of water, electricity and oil, and a ledger shall be established.
2. Do a good job in recycling resources. Sign a recycling contract with the designated recycling unit Dongyuan Waste Recycling Store, implement centralized recycling measures for waste paper, waste lamps, waste electrical and electronic products, waste plastics, waste metals and other items, and establish a recycling registration ledger.
3. About demonstration creation. Although our bureau is not included in the annual creation unit, we normally carry out the publicity work of conservation-oriented units and water-saving units, and actively carry out energy-saving publicity and training.
4. Implement energy-saving funds. Our bureau has implemented the funds for energy-saving work, and the funds are budgeted.
5. Carry out energy-saving transformation. Our bureau actively promotes the use of new energy-saving technologies and new products. In June of 20**, all the lighting lamps in the office area were replaced by LED energy-saving lamps, and the utilization rate of high-efficiency lighting lamps in the office area reached 100%.
6, do a good job of measurement. The allocation rate of domestic water metering devices reaches100%; The allocation rate of measuring instruments in public institutions reaches 90%.
Third, there are problems.
Because the office building of our bureau was built and put into use more than ten years ago, the toilets on both sides of the stairs do not save water, and the use of national water-saving appliances has not reached 100%. In addition, the office building corridor street lamps have not been replaced by LED energy-saving lamps.
Fourth, the next step
Try every means to solve the problem of funds and strive to transform water-saving appliances. All toilets use national water-saving appliances. All corridors, stairs and passages in non-office areas are replaced with energy-saving lamps.
4. Energy consumption self-inspection report
(1) Improve the working system and form a long-term mechanism. Based on its own reality, the street has formulated the Implementation Plan for Energy Saving and Emission Reduction in 20XX Street, established and improved the supervision and inspection of energy saving and consumption reduction, statistical reports of resources and energy consumption, and comprehensively reflected the implementation of energy saving and consumption reduction.
(2) Strengthen daily management and do a good job in every link.
(1) Reduce fuel consumption. The street has formulated the management method for official vehicles and the management system for street vehicles and drivers, strictly managed buses, rationally arranged vehicles according to the principle of giving priority to small-displacement vehicles and resolutely carpooling when going out, made overall planning, scientifically drove and saved fuel, and formulated a dispatch list for street official vehicles, requiring drivers to register and put on record every time they travel, and strictly forbidding private use of buses, which greatly reduced fuel consumption and saved energy.
(2) Energy-saving procurement. Every purchase on the street can only be made after the plan is submitted for approval. The purchase of office supplies is strictly controlled. Those that can be reused after maintenance are determined not to buy new ones, and the use of disposable consumables is reasonably reduced. When it is really necessary to purchase goods, priority should be given to purchasing energy-saving products and materials, and procurement should be conducted in strict accordance with the government procurement system. There is no phenomenon of repeated procurement and split project procurement.
(3) Save electricity. Most of the lighting equipment in the streets, communities and enterprises under their jurisdiction, such as rooms, corridors, corridors, toilets, stairs, etc., are equipped with energy-saving bulbs and managed by special personnel to prevent the phenomenon of "ever-burning lamps"; Except in special circumstances, the air conditioning equipment is turned off, and the air conditioning temperature is set at 26 degrees Celsius in summer; Water dispensers, printers, photocopiers and other equipment are only turned on when necessary to avoid long-term standby.
(4) Save water. Streets should carry out daily maintenance of water equipment every month to prevent water leakage and long running water. The slogan "Please save water" has been posted in toilets, sinks and other places to conserve flowers and plants with waste water. Now all employees have developed the good habit of saving water.
(5) save money. The street has established a system of purchasing and receiving office supplies, and made a detailed record of the storage and distribution of items; At work, if you can make changes on electronic documents, you don't need to print them. All documents that need to be printed are printed on both sides. Waste paper is used as draft paper before it is crushed, and it can be used again after it is used without losing the refill. At the same time, don't hold meetings if you can write, and try to control the number and scale of compressed meetings.
(3) Organizing activities to promote and exchange experiences.
Neighborhood organizations organize residents in the jurisdiction to carry out voluntary activities of resource conservation, promotion and demonstration activities of energy-saving products, communicate and exchange good experiences and practices of energy conservation and emission reduction in daily life, enhance residents' awareness of energy conservation and emission reduction, actively play the role of mutual supervision among residents, and let residents effectively practice a low-carbon lifestyle and enjoy a green and fashionable life.
(four) to strengthen supervision and management, and promote energy conservation and efficiency.
Streets regularly or irregularly inspect the communities and enterprises within their jurisdiction, guide and rectify the found violations of energy conservation and emission reduction, and require all employees to learn, raise awareness, start from themselves and start from small things to promote energy conservation and emission reduction to achieve practical results.
5. Energy consumption self-inspection report
I. Completion of energy-saving indicators (I) Overall situation of energy resource consumption
1. Changes in the area of public institutions, building area, number of energy users and main energy-using equipment.
leave out
2. Total consumption of energy resources and main indicators. Trend and total year-on-year analysis.
leave out
(II) Year-on-year analysis of per capita energy consumption, energy consumption per unit building area and bicycle energy consumption.
(1) per capita energy resource consumption
(2) Energy consumption per unit building area
(3) Analysis of the reasons for the decline of various energy consumption levels.
The reason for the increase in energy consumption is that the increase in electricity consumption is due to the replacement and decoration of school buildings, the increase in electricity consumption for teachers' office and teaching, and the increase in water consumption is due to the replacement and decoration of school buildings.
Second, the implementation of energy-saving measures
(1) system construction.
1. Establish and improve the school energy-saving work leading group, with the party branch secretary as the leader and the vice president as the deputy leader. The members of the leading group are composed of the heads of various departments of the school and the elite of the party, government and military industry.
2. Hold regular meetings of energy-saving leading groups to discuss energy-saving measures and schemes in line with the actual situation of the school, work together, and collect and sort out data by relevant personnel.
3. The energy-saving leading group regularly checks the concrete implementation of energy-saving and consumption-reducing work on campus, and puts forward rectification opinions in time when problems are found, which effectively promotes the smooth progress of energy-saving work in our school.
(2) Supervision, management and supervision.
1. Our school has incorporated the energy-saving goal into the school's annual work plan, and all members of the energy-saving leading group are responsible for supervision and management.
2, the school energy-saving leading group members have a clear division of labor, leading group members supervise and manage their respective areas, and can communicate well with relevant teachers to ensure the smooth progress of energy-saving work.
3. The leading group for energy conservation conducts random checks on energy-consuming places every day to ensure that the energy-saving work is implemented.
4. The school has established a list of key energy-using departments and formulated corresponding energy-saving management systems, such as voice classrooms, multimedia classrooms, network classrooms, electronic lesson preparation rooms, water rooms and toilets.
(3) Publicity, education and training.
1. In order to implement the energy-saving work and let all teachers and students gradually establish the consciousness of saving energy, saving resources and consciously participating, the school often uses the school meeting, class meeting, class meeting and red scarf to publicize to all teachers and students. Use campus bulletin boards, class cards and other forms to carry out subtle education and publicity.
2. Regularly use the time of teachers' meeting to educate teachers on energy-saving work and publicize the great social significance of energy-saving work.
(4) Establish a perfect incentive mechanism.
1. The school has set up a special fund for school energy conservation, which is mainly used for the rectification of energy-saving measures in energy-using departments.
2. At the end of each semester, the school will commend teachers and students who have made outstanding achievements in energy conservation.
3. Resolutely stop wasting energy, and help and educate relevant personnel.
Third, the next steps taken by the school.
Intensify energy-saving publicity and education for all teachers and students, establish a more reasonable and effective management, supervision and reward mechanism for key energy consumption problems and outstanding problems, conduct regular inspections and spot checks on energy consumption in classes and offices, and correct problems in time when found.
Four. Goals, Tasks and Measures of School Energy Saving in 20XX
In 20XX, with the coordination and help of the higher authorities, the school replaced more than 400 traditional lamps in Dongguan, Guangdong with 100% energy-saving lamps. At the same time, at the end of 20XX, the water supply system of the school toilet is completely replaced, which can achieve better power and water saving effect. In the new year, the school will strengthen daily inspections to ensure that there is no ever-burning lamp and running water on campus, and actively advocate the concept of low-carbon life. The planned electricity consumption in 20XX will be 20 times higher than that in 20XX.