1. Problems that should be paid attention to in warehouse fire management.

(1) Dangerous goods shall be stored separately, separated from other articles, and inspected regularly;

(2) Do a good job in the management and maintenance of fire extinguishers, and put them in accessible places;

(3) All kindling is prohibited. Except open flame, no fire source is allowed to enter the site, such as static electricity, impact and motor vehicles without flame arresters.

(4) When electrical appliances are found to be abnormal, the power supply should be cut off in time, and patrol inspection should be strengthened in rainy days;

(5) For some articles prone to mildew and spontaneous combustion, check frequently to see if there is fire in the incoming materials.

2. Problems that should be paid attention to in property fire management.

(1) Ensure that there are fire exits between floors;

(2) It is forbidden to pile up sundries in the corridor;

(3) it is forbidden to burn garbage in the community;

(4) For naked flame decoration, strict safety measures should be taken. It is forbidden to pull wires without permission, and inflammable and explosive chemical decoration items should be managed well;

(5) Try to avoid children playing with fire and strengthen the management of setting off fireworks.

3. Problems that should be paid attention to in electrical fire prevention.

(1) The wires and switches used shall be replaced immediately if they are deformed or burned;

(2) When laying wires, it is forbidden to pull and connect them randomly;

(3) It is forbidden to use metal wires to stay or hang wires on metal objects;

(4) are not allowed to dry clothes on the wire;

(5) It is not allowed to replace the fuse with steel or iron wire;

(6) The switch shall be installed on the base of incombustible material, and the knife switch shall be protected by incombustible material box, so as to prevent sparks from splashing out and lint from falling on the knife switch and contacting with the sparks and catching fire;

(7) Lighting lamps and lanterns should be installed on the basis of incombustible or flame retardant;

(8) Electric soldering irons and soldering irons used for electrifying should be placed on the base of fixed nonflammable materials with poor thermal conductivity, such as ceramics and refractory bricks, and keep a distance of more than 0.5 ~ 1 m from the surrounding combustible materials. Unplug the plug and cut off the power immediately after use.

Security personnel must establish a correct awareness of fire management and convey the importance of fire management to residents in the community, so as to effectively prevent fires and maintain social order.