Production Practice 1 I. Purpose of Practice
1. Through personal contact with automation equipment and experimental equipment, and through the explanation of teachers and factory personnel, I have a preliminary understanding of automation specialty, and verified, consolidated and deepened the professional basic theoretical knowledge in practice.
2. Strengthen the understanding of enterprise's technical operation, combine the learned knowledge with practice, make a preliminary analysis, observation and comparison of various technical operations of internship units by using the theoretical knowledge of professional basic courses, find out their rationality and shortcomings, flexibly use the learned professional knowledge, find and raise problems in practice, find ideas and methods to solve problems, and improve the ability to analyze and solve problems.
3. Understand the design, development and maintenance of electronic control products, and understand the development trend and professional prospect of automation specialty.
4. Through some practical cognitive practice, pave the way for future graduation design and thesis writing.
Let us know the gap between knowledge and reality, improve our practical work ability, realize what we need in practical work and which direction we should develop, point out the road for our future development and lay a good foundation for our future practical work.
Second, the internship location and schedule
1. Internship location:
Zhongye continuous casting technology engineering co., ltd
2. Timetable:
Depart from Huangjiahu Campus of Wuhan University of Science and Technology at 8: 30.
Arrived at MCC Continuous Casting Technology Engineering Co., Ltd. at 9: 20 and began to visit.
1 1:00 back to school.
Third, the internship unit introduction
China Metallurgical Continuous Casting Technology Engineering Co., Ltd. (MCC) is a scientific and technological joint-stock enterprise initiated by China Metallurgical Science and Industry Group (MCC). In xxxx, MCC ranked 280th among Fortune Global 500 enterprises. Headquartered in Wuhan, MCC Continuous Casting is the largest metallurgical professional technical engineering company in China, featuring continuous casting, cold-rolled strip steel and surface treatment. In July of xxxx, MCC announced the merger of MCC South and MCC Continuous Casting. Since then, MCC has become a wholly-owned subsidiary of MCC South.
The company's main business is: billet, slab and thin slab continuous casting and rolling engineering, strip cold rolling and treatment engineering and industrial electrical automation control system. Practice experience of automation specialty. Based on the advantages of MCC Group, it set up a branch in Beijing to engage in the investment, construction and operation of seawater desalination projects at home and abroad. The core business of continuous casting includes EPC project general contracting. This division has the advantages of specialized continuous casting technology research and development, engineering design and equipment manufacturing capabilities, and can provide customers with integrated engineering general contracting and individual services for the design, manufacture, installation and commissioning of various continuous casting machines (large and small square billets, round billets, rectangular billets, shaped billets, flat billets, slabs, thin slabs, etc.). ); Technical service: relying on the research and development strength of specialized continuous casting technology, the Division provides customers with relevant technical services such as continuous casting production technology, variety development, production process know-how, slab quality problem diagnosis, etc. Equipment maintenance service outsourcing, the division has specialized continuous casting equipment manufacturing and supply chain management capabilities, and can provide continuous casting equipment maintenance service outsourcing, bringing good economic benefits to customers.
Human resource strength of the company: At the beginning of xxxx, the company had 854 employees, including 496 technical managers, doctors 1 1, masters 1065438 and 83 senior engineers. The company has its own independent research institute in Beijing and a number of core technologies with independent intellectual property rights. Annual R&D expenses account for 5% of turnover, and R&D strength is strong. MCC Continuous Casting has a professional equipment manufacturing base-MCC Yixin Technology, which has a strong equipment manufacturing capability. The main machinery and electrical equipment are manufactured in the company, and the product quality and delivery time are guaranteed.
Division/subsidiaries: Continuous Casting Division, overseas business department, Beijing Science & Trade, Serip Technology, MCC CreditEase Technology and MCC Heavy Industry.
Fourth, the internship content
6543810.5, we arrived at MCC Yixin Technology Co., Ltd. At the beginning of the internship, Li Shifu, an employee of the company, led the whole class to visit the workshops of the company professionally. In the workshop, Li Shifu gave a professional and technical explanation to the questions raised by the students during the visit. During the visit, Li Shifu introduced in detail the new technologies and new equipment adopted and developed by my major in their workshop, which deepened my professional knowledge. Each workshop has its own functions, but they are closely related. For example, to make a rolling mill requires the cooperation of all workshops, from the initial drawing design to the final parts assembly, there is no mistake, and it is precise and accurate.
Students are full of doubts about some short and fresh terms introduced by Li Shifu, such as "copper bar", "master-slave controller" and "PID", and put forward their own questions. Li Shifu patiently explained our expertise and knowledge. Electronic products are upgrading rapidly, and he gave a very detailed introduction to what technology research and development needs, what college students need, and what the professional development prospects are. Because he has worked in this company for quite a long time, he knows a lot about college students, puts forward some requirements for the skills we should master in universities, and dispels doubts about the mastery of professional knowledge and the position in their products, which has benefited me a lot.
Five, internship experience and experience
Through this internship, I learned a lot of things that I couldn't learn in class, as if I suddenly became mature, understood the truth of being a man and doing things, and understood the significance of learning. I saw clearly my life direction, and also made me realize that engaging in electronic work should support a careful and serious work attitude, have a peaceful mind and innovative spirit, and have a heart ready to accept tests to meet the unknown world.
During the internship, I was modest and cautious, listened carefully to the guidance and explanation of relevant technicians, and was able to observe carefully, experience personally, think independently and analyze comprehensively. I also cultivated my patience and quality, and I was able to follow the instructions. I feel the pleasure of asking questions and solving problems. I also like my major more, and I am no longer confused.
This internship made me feel the application of what I have learned for the first time. The combination of theory and practice has opened our eyes and is also a preliminary test of what I have learned before! Because practice is the only criterion for testing truth. This internship really benefited me a lot in my future study and job hunting. In a short period of half a day, I have initially completed the re-understanding from rationality to sensibility, which has also given me a preliminary understanding of this society and inspired me to grasp the direction in the future.
In a word, as a sophomore, this professional practice undoubtedly makes me look at the automation major from a brand-new perspective, and it will certainly help my future development and promotion. I will take this internship as the starting point of my life, and constantly ask myself to improve myself and do better in my future work and study. Finally, I want to use Qu Yuan's words as a conclusion to encourage you: The road is long and Xiu Yuan is Xi, and Xiu Yuan is Xi, so I will go up and down for it.
Production Practice 2 Nearly one month's junior summer production practice is over. Looking back on this short one-month internship, I have gained a lot and accumulated a lot of useful experience for my future work.
Internship is actually a good opportunity to combine theory with practice, and it is also an opportunity to exercise one's ability. Generally speaking, I learned a lot of practical knowledge through practice, not only applying theory to practice, but also enriching my theoretical knowledge from actual construction. Many unexpected things and rote memorization in learning have gained a deep understanding through personal watching and hands-on. Secondly, I also learned something hard to learn in books, how to get along with my own leaders and colleagues. At the same time, I also deeply understand the meaning of the word "effort". The following is a concrete summary of my internship.
This internship, from the content of the internship, we have fully contacted all aspects of a housing construction project. In the three sites visited by the internship, we saw the excavation of building pile foundation, the construction of floor beams, columns and floors of the main structure of frame shear wall, and the construction of infilled walls and pipes after the completion of the main load-bearing structure. During the internship, we learned the reading methods of construction drawings, construction drawings and related specifications in the project department, participated in the arrangement and recording of some construction materials, and contacted and learned some knowledge of construction drawing budget, which has important practical significance for our future work practice and design study. It is also an important experience that we are difficult to contact and understand the whole process of building construction and the operation and management mode of a project. During the internship, I actually operated measuring instruments such as total station and level, reviewed autocad software commands and participated in drawing some cad drawings of the project department. These are the basic skills necessary for a qualified civil engineer, and these trainings at the internship site are also rare practices and common skills we need in the future.
At the construction site, I also pay special attention to the problem of civilized construction. The impression of civilized construction, this internship really gave me a refreshing feeling, and also changed some views on the construction site. Under the restriction of market economy, civilized construction has been greatly improved compared with previous years. From the civilized construction signs, safety signs and billboards everywhere to the orderly stacking of materials, we can feel the progress of China's architectural technology. However, in the construction site, we can still see some shortcomings and defects compared with the book theory, and we also feel that there is still room for improvement and improvement in the construction level and civilization level of our country.
Production Practice Part 31:Take the time, place and task of practice as the introduction, or summarize the experience and results of several months of practice in highly generalized language, and lead out the report content.
Part II: Practice process (practice content, links and practice)
1. The act of translating the theories, methods and means learned at school into practice;
2. Observe and experience what things have not been touched in school, in what way, in what form or appearance. For example, the function of the department, you didn't understand at first, was caused by what kind of problems appeared in the work. Another example is interpersonal coordination method, interpersonal coordination at work, the difference between public relations theory and practice you have learned, and how you understand public relations theory.
The third part: internship experience, experience and lessons, the direction of future efforts, etc.
The article can also take internship experience and experience as entries to structure the full text. For example, find your own advantages in practice: strong sense of teamwork; Be good at challenging new jobs according to your own knowledge and ability; Good at summing up afterwards and so on. Defects in practice: political sense of touch is not sensitive enough; Lack of professional knowledge; Poor hands-on ability. Use these to string together the process content of your own practice. However, such a report requires high writing ability.
Third, the writing requirements of the internship report:
1. You must write your own internship experience in the report. You can refer to other people's information, but you can't copy it. Once found, it will be treated as zero.
2. If there are quotations or excerpts from other places, indicate the source. The labeling method of references is always post-labeling, and the specific format is: citation title, author, source (publication name), page number, publication date or publisher, publication time and edition.
3. The article starts with a summary and keywords.
4. The language requirements are concise and meet the requirements of official documents. Don't say too much "I". After introducing my internship time and place and assigned tasks in the first paragraph, the following text should be as personal as possible. The number of words should be above 3000.
5. Be sure to contact the instructor and leave contact information with each other before going to the unit for internship. After a period of internship, the first thing to be submitted is the report outline, which should be about 800 words, mainly explaining the main framework of the report you want to write, and then the instructor will start writing after knowing it. Contact the tutor for the specific delivery time, and it is best to submit the draft to the tutor for revision 10 days before the end of the internship. After the teacher thinks it is qualified, he will copy it on the internship report printed by the college.
6. After returning to the college after the internship, prepare to exchange internship information.
Production practice Article 4 The school has arranged a week's clothing production practice for us this semester, which is an opportunity, a challenge and a breakthrough for us. Although I have taken courses related to fashion making in college, I am still confused when I actually go to practice. I don't know where to start. Even the teacher explained to us the essentials and methods of changing the design of women's structure in styles, as well as the introduction of some clothing production techniques, but after all, they are all theoretical knowledge and it is still difficult to apply them to practice, so this internship is a valuable exercise opportunity for us. Let me really get rid of books.
This internship company is still relatively large in scale. The main workshop covers an area of more than 3,000 square meters, with more than 400 square meters of staff dormitory and 100 flat staff canteen. The company has done a good job in greening, with many flowers and trees and a beautiful environment. It is a rare internship company.
When I first went to the workshop to practice clothing production, I felt that my knowledge of clothing was too superficial. Although I have learned a lot of theoretical knowledge in school, it is not as good as my actual operation and personal observation during my internship. So I want to apply theory to practice well here, consolidate my knowledge and improve my practical operation ability.
When I first started my internship, I received a period of training. During the internship, I learned about the whole workflow of garment production and the company's rules and regulations, and then I can formally enter the workshop to participate in the garment production internship.
I was arranged by the leader to produce in Australia, and I learned more and more things in the first-line production area, which is the best choice for our interns. The men's suits produced by this production line are mainly exported overseas. What impressed me most here was the advanced production equipment and strict management system, which showed me the necessary conditions for a large enterprise.
In the sewing workshop, I learned that garment sewing is the most important part of the whole garment production. The purpose is to make the products consume less time, consume less and process the shortest time in the sewing production process, and produce products that satisfy customers. So it is very important to do a good job in craft design, which I can't learn in school books.
Just one week's clothing production practice is coming to an end. Although the time is short, I have learned a lot. I know these small progress is nothing, and I will work harder and harder in my future study and life. In a word, this clothing production practice has benefited me for life.
During the internship, I contacted a lot of professional knowledge, made a lot of internship records, and learned some new construction technologies. My internship position is a professional supervisor of civil engineering. After understanding the basic construction technology, I must also understand the norms of construction quality, what level is qualified and what is unqualified, and I must memorize it.
Practice is a very important part of university study and life, which can improve our social practice ability. After more than two years of systematic knowledge study in school, I have mastered the theoretical knowledge about project management, but it is relatively empty and has not formed a clear perceptual knowledge. In order to test learning in practice, deepen our understanding of what we have learned, and integrate theory with practice, it is necessary to participate in practice. By finding and solving problems in practice, I have expanded my knowledge and understanding of related professional knowledge. I can not only apply what I have learned in practice, but also learn a lot of practical things, improve my comprehensive ability and adapt to work faster after graduation!
It is with this attitude that I chose the first project department of Kunming Sanjian as my internship, focusing on civil engineering. During this period, I learned a lot through continuous communication with the owner, the contractor and the supervisor, especially having an intuitive and clear understanding of some construction techniques, construction sequences and construction methods, which benefited me a lot and made me feel the joy of applying what I have learned.
The following are the main contents of my internship:
During the internship, the most contact is steel bars. Beams, slabs, columns and shear walls are all cast-in-place, and the arrangement of steel bars is of course the most important, so the inspection of steel bars is particularly important. When I arrived at the construction site, the foundation project had been basically completed and the main project was under construction. Basically, the main job every day is to check the steel bars such as beams and plates. Such as stressed steel bars, erection steel bars, structural steel bars, stirrups, negative bending moment steel bars, distributed steel bars, etc. Only then can we really understand the role of these steel bars in the construction site. It provides a good perceptual knowledge for future study. The specific content will be introduced in detail in the special report.
For me, this is a process of combining theory with practice. Under the guidance of on-site construction personnel, technical directors and supervisors, and with my own efforts, I actively participated in the work, which made me have a deep understanding and mastery of the main construction of the project. But also have a deep understanding of all aspects of the whole civil engineering, and consolidate the knowledge in textbooks from the actual construction, integrate theory with practice, and enrich their theoretical knowledge. Although the whole internship process is not long, I let myself know how to be a construction worker. During the whole internship, I found my own theoretical shortcomings, which filled me with electricity for future study. Although the construction site is a bit bitter, it also makes me understand a sentence: "You are a master if you suffer."
Through this period of internship, I found that the workload of the construction industry is also relatively large. As long as it is within the scope of responsibilities, it should be taken seriously and directly responsible to Party A. Although the supervisor has an office and the conditions are OK, except for lunch break and filing, most of the time is on the front line of the construction site, which is also very hard. For example, when pouring concrete, standing by is a very important job. At this time, the supervisor must insist on standby. At the same time, through the words and deeds of the masters, I was moved by their serious and responsible attitude. Their superb professional quality is eye-catching. I didn't find any problems with many problems. The supervisors found them one by one with keen professional consciousness and took pains to ask the construction party to rectify them, which made me very moved. Due to the limited level of the construction party, various problems are inevitable. The master will talk to the project manager or the construction party and ask for serious treatment. I also learned some knowledge about quality control.