The first part of the energy-saving implementation plan of public institutions
In order to fully implement Scientific Outlook on Development, vigorously promote the energy-saving work of public institutions of the Bureau of Geology and Mineral Resources, and implement the Energy-saving Plan for Public Institutions of Henan Bureau of Geology and Mineral Resources for 20XX-20XX (hereinafter referred to as the Plan), ensure the orderly and effective development of energy-saving work and realize the energy-saving goal for 20XX, this implementation plan is specially formulated.
primary objective
According to the requirements of the Notice on Several Issues Concerning Strict Economy of Party and Government Organs and the Energy Saving Plan of Public Institutions of Henan Bureau of Geology and Mineral Resources in 20XX-20XX issued by the General Office of the Central Committee and the General Office of the State Council in the middle of 20XX, the following objectives will be achieved by the end of 20xx: First, based on 20xx, the unit building area will be saved by 5%, the per capita water saving will be 5%, and the bus will be saved100km. The second is to create a number of energy-saving demonstration units; The third is to formulate the energy consumption quota standard of public institutions in our bureau and establish and improve the energy consumption monitoring platform of public institutions in our bureau.
Main measures
(1) Improve the leading institutions for energy conservation and emission reduction of all units in Zhengzhou.
At present, our bureau has set up a leading group for energy conservation and emission reduction and its office, which is located in the service center of the bureau. All units in Zhengzhou should also set up leading groups and leading group offices for energy conservation and emission reduction. Among them, the leading group for energy conservation and emission reduction is the decision-making body, which is responsible for the decision-making, leadership, organization and coordination of important issues of energy conservation and emission reduction in this unit. Team members should include: leaders in charge of the unit and leaders of relevant departments. The leading group has an office as the executive body, which is responsible for the daily affairs and related coordination of the leading group, and urges and supervises all departments of the unit to promote energy conservation and emission reduction. All units shall submit the establishment documents to the Office of the Leading Group for Energy Conservation and Emission Reduction of the Bureau for the record before April 10.
(two) pay attention to publicity and education, and effectively raise awareness.
All units should vigorously carry out energy conservation and environmental protection publicity, and carry out energy conservation publicity through billboards, blackboard newspapers, internal publications, internet and other media, so that cadres and workers can further unify their thinking, raise their awareness, enhance their sense of urgency, responsibility and mission in doing a good job in energy conservation and emission reduction, and realize that strengthening energy conservation and emission reduction is an inevitable choice for thoroughly implementing Scientific Outlook on Development and realizing sustainable development. Continue to organize the "National Energy Conservation and Emission Reduction Action", enhance the resource awareness of the broad masses of cadres and workers, cultivate good office energy habits, and form a good atmosphere of "everyone saves, everything saves, and everywhere saves".
(3) Improve and implement the energy-saving management system and build a long-term energy-saving mechanism.
1, standardize management and pay close attention to daily energy saving. All units should combine their own work characteristics, focus on improving energy utilization efficiency, focus on resource integration and saving electricity, water, oil, heating and office supplies, formulate the construction plan of conservation-oriented institutions and seriously organize their implementation. Establish and improve the energy consumption supervision system and measures for lighting, air conditioning, heating and office facilities and equipment in offices and business places. We will continue to implement systems such as power outage, dynamic monitoring of water and electricity, and vehicle publicity management. After the implementation of the above-mentioned system, the actual effect is remarkable, which has been affirmed by the provincial energy-saving inspection team, and the above-mentioned energy-saving measures have been promoted in all units in Zhengzhou since 20XX.
2. Establish energy consumption statistics and reporting system. Each unit shall designate a special person to record the original data of energy consumption measurement according to the specified requirements, establish statistical ledgers, and submit relevant quarterly and annual reports to the Office of the Leading Group for Energy Conservation and Emission Reduction of the Bureau in a timely manner. The date of quarterly report is within 5 days after the end of each quarter, and the quarterly report is submitted to the e-mail box in the form of electronic report. The annual report date is before 65438+1October 3 1 of the following year. The annual report shall be submitted in both electronic and paper forms, and the paper report shall be stamped with the official seal of the company.
3, the gradual implementation of energy consumption measurement system and energy-saving facilities. According to the planning requirements, all units should distinguish the types and systems of energy consumption, and implement household, classification and itemized measurement of energy consumption. Accelerate the transformation of energy-saving facilities and use energy-saving lamps and water-saving sanitary ware, requiring all units in Zhengzhou to implement relevant measures.
4, the implementation of energy-saving work liaison meeting system. Liaison meetings are divided into annual meetings and temporary meetings. The annual work meeting is held once a year, and temporary meetings are held irregularly according to the needs of the work. The meeting was convened by the Office of the Leading Group for Energy Conservation and Emission Reduction of the Bureau, and its members included relevant members of the Leading Group for Energy Conservation and Emission Reduction of the Bureau and energy-saving liaison officers of various units in Zhengzhou. The main task of the meeting is to convey the new spirit and new requirements of the central state organs, provincial party committees, provincial governments and departments and bureaus on energy conservation of public institutions; Exchange energy-saving progress of public institutions; To study ways and measures to solve key problems in energy conservation work; Put forward working ideas, opinions and suggestions.
5, the establishment of energy-saving work target management responsibility system. Bureau of energy conservation and emission reduction work leading group will determine the energy-saving targets and indicators, according to the annual decomposition of the implementation of Zhengzhou Bureau units. All subordinate units in Zhengzhou City have signed the "Responsibility Letter for Energy Saving Targets", and made a commitment to the energy saving targets and tasks of their own units. The person in charge of each unit is fully responsible for the energy-saving work of the unit, and the completion of energy-saving targets is the content of the assessment and evaluation of the person in charge of each unit.
(D) to strengthen supervision and management of energy conservation
The Office of the Leading Group for Energy Conservation and Emission Reduction of the Bureau shall, jointly with relevant departments, strengthen the regular inspection of energy conservation of all units in Zhengzhou. Before the 20th of the next month after the end of each quarter, the Office of the Leading Group for Energy Conservation and Emission Reduction of the Bureau will organize relevant personnel to inspect the energy conservation work of all units in Zheng, and select Zheng 1-3 units for inspection each time. The inspection is carried out according to the Detailed Rules for Assessment of Energy Saving and Emission Reduction Standards of Provincial Authorities in Henan Province, focusing on: whether relevant energy saving management systems are established; Whether the energy-saving archives are established and complete; Whether the energy-saving measures are effectively implemented and whether the energy-saving targets are completed as planned.
Work steps and schedule
1, before March 25th, complete the preparation of energy-saving work target responsibility book for units in Zheng.
2. Before March 30th, the third meeting of energy-saving liaison officers of Henan Bureau of Geology and Mineral Resources was held. The contents of the meeting include:
(1) Summary of XX-20xx statistical report on energy conservation and emission reduction, pointing out the problems existing in the report, and putting forward relevant requirements for future statistical reports.
(2) Arrange to sign the responsibility book of energy-saving targets of all units in Zhengzhou. The responsibility book of energy saving and consumption reduction targets shall be brought back by each unit, signed by the person in charge of the unit or the competent leader before April 15, sealed by the unit, and submitted to the office of the leading group for energy saving and emission reduction of the bureau.
(3) Arrange to report the statistical data of energy consumption of public institutions in the first quarter of 20XX.
3.20XX Before the end of May, all units of our bureau in Zhengzhou shall, according to the energy-saving requirements of national and provincial public institutions, formulate energy-saving management systems and reward and punishment measures for water saving, fuel saving, solar terms, lighting, elevators, air conditioners, office equipment, etc., and report them to the bureau's energy-saving leading group for the record before the end of June for strict implementation. In the second half of 20XX, the leading group for energy conservation and emission reduction will organize regular inspection and appraisal.
4.20XX Before the end of June, all units in Zhengzhou City were responsible for the energy-saving renovation of office lighting equipment, and all the high-energy fluorescent lamps, incandescent lamps and spotlights used were replaced with energy-saving lamps. At the same time, all faucets, flushing valves and water tanks that do not meet the water-saving standards are replaced. In the second half of 20XX, the leading group for energy conservation and emission reduction will organize inspection and acceptance.
Implementation Plan for Energy Saving in Public Institutions (II)
Energy conservation in public institutions is an important measure to implement Scientific Outlook on Development and accelerate the construction of a resource-saving and environment-friendly society. It is also an inevitable requirement for public institutions to strengthen their own construction and establish a good social image. In order to thoroughly implement the Regulations on Energy Conservation of Public Institutions in the State Council, promote the implementation of energy conservation work of public institutions in our township, and ensure the sustained and effective development of energy conservation work of public institutions, according to the requirements of the document (X Zhengban Letter [20XX] 12 1) Notice on Printing and Distributing the Implementation Rules for the Assessment of Energy Conservation Target Management of XXX Public Institutions,
First, the significance of energy saving in public institutions
Carrying out energy conservation in public institutions in an all-round way is an objective requirement to strengthen the self-construction of public institutions, improve administrative efficiency and reduce administrative costs, and it is also an inevitable choice to give full play to the guiding and demonstration role of public institutions and promote energy conservation in the whole society. My township should fully understand the importance of doing a good job in energy conservation in public institutions from a strategic and overall perspective, take the lead in practicing economy, play an exemplary role, and drive the units under its jurisdiction to do a good job in energy conservation.
Second, the guiding ideology
Adhere to the guidance of Scientific Outlook on Development, take scientific and rational consumption and improve resource efficiency as the core, and fully implement the energy-saving regulations of public institutions; With the goal of building a conservation-oriented institution, we should increase publicity, strengthen management, improve the system and innovate the mechanism; Focus on saving water, electricity and oil, practice strict economy, put an end to waste and improve resource utilization; Take the opportunity of "year of organ style construction" to promote the energy-saving work of rural public institutions in depth. Conscientiously implement Scientific Outlook on Development, in accordance with the social requirements of building a "resource-saving and environment-friendly", based on the Energy Conservation Law of People's Republic of China (PRC) and the Energy Conservation Regulations of Public Institutions of the State Council, with improving the energy utilization efficiency of public institutions as the core and building energy-saving institutions as the goal, strengthen leadership, improve organization, strengthen management and deepen publicity to the maximum extent. Actively promote the energy-saving work of rural public institutions, gradually improve the energy consumption of public institutions, and give full play to the exemplary role of public institutions in the energy-saving work of the whole society.
Third, the status quo and problems of energy saving
On the one hand, people's awareness of energy conservation is not strong, the utilization rate of resources is not high, there are too many high-energy-consuming equipment, the popularization rate of energy-saving equipment is low, and the waste phenomenon is serious. On the other hand, the lack of publicity, awareness, measures and systems has affected the normal development of energy-saving work in open institutions.
Fourth, the main energy-saving targets
By the end of 20XX, the following objectives will be achieved:
1, based on 20XX years, realize 20% power saving, 20% water saving, more than 5% fuel consumption per 100 kilometers for official vehicles, and reduce energy consumption per unit building and per capita by 20% respectively;
2, to create a number of energy-saving demonstration units;
3. Formulate the energy consumption quota standard of public institutions, and establish and improve the energy consumption information management platform.
4. Enhance the good energy-saving awareness of cadres and workers in our township through energy-saving publicity and training of public institutions. By vigorously implementing cost-effective and cost-free energy-saving management measures, we can improve energy utilization efficiency and effectively reduce energy consumption by more than 6%.
5. Form an effective organization and management system. Establish energy-saving leading institutions in my township, gradually build energy-saving quantitative management system and information management platform of public institutions in my township, and constantly consolidate the foundation of energy-saving management of public institutions; Accelerate the improvement of energy-saving management foundation of public institutions in my township.
6. Form a comprehensive energy consumption quota system. Gradually establish the energy-saving system, standard system, evaluation system and technical support system of rural public institutions; Establish and improve the energy-saving organization system of public institutions with classified management, clear responsibilities and coordinated operation, and gradually establish a long-term energy-saving mechanism of public institutions.
Verb (abbreviation of verb) key links and measures of energy saving
(A), strengthen the energy-saving management of electrical equipment
1. Strengthen the energy saving of lighting system. Promote the use of energy-saving lighting lamps in township public institutions and complete the replacement of non-energy-saving lamps as soon as possible; The lighting system in public areas should be equipped with automatic control switches, and all offices and conference rooms should make full use of natural light for lighting; Reduce the electricity consumption of lighting equipment, turn off the lights when leaving the office, cut off the power supply of office equipment, and resolutely put an end to the phenomenon of "unmanned lights and ever-burning lamps"; Strengthen the control of the use of peripheral landscape lighting, which is not used at ordinary times, and is enabled in a limited time for major events and important festivals; Actively promote government agencies to give priority to purchasing energy-saving (including water-saving) products, and select some products with obvious energy-saving effect and mature performance for compulsory procurement; Timely elimination of inefficient equipment and products prohibited by the state; Strictly control new electrical equipment.
2. Strengthen the energy saving of air conditioning system. Establish air conditioning system operation management system and optimize air conditioning operation mode. Strictly implement the national temperature control standards and set the air conditioning temperature reasonably. Except for special purposes, the room temperature of offices, conference rooms and other office areas is 10℃? Don't turn on the air conditioner at 30℃, and the air conditioner temperature should not be lower than 26℃ in summer and 20℃ in winter; The staff should turn on the air conditioner according to the meeting time (before the meeting 15 minutes), so that the air conditioner will not be turned on when there is no one indoors, and the doors and windows will not be opened when the air conditioner is turned on; Generally, air conditioning is not needed in winter; Clean the air conditioner regularly to improve its energy efficiency.
3. Strengthen the power management of office equipment. Reduce the standby energy consumption of office equipment such as computers, printers and photocopiers. Turn it off in time when not in use, or set it to automatically enter a low-energy sleep state; Reasonably adjust the running time of office equipment, reduce standby consumption, and gradually eliminate high-energy office equipment; Set power-saving signs and room temperature control signs at appropriate positions in the office building; All units should strengthen the inspection and maintenance of power facilities and equipment, carry out regular maintenance, reduce power loss and ensure the safety of electricity use.
4, strengthen the management of high-power electrical appliances such as heating facilities, it is strictly prohibited to configure mobile heating equipment, according to the needs of the work, can be implemented through government procurement.
(2) Strengthen the energy-saving management of water supply system.
Actively promote the use of water-saving appliances and strengthen the daily maintenance and management of water-using equipment. Regular inspection and timely replacement of aging water supply pipes and components by special personnel to prevent "running, running, dripping and leaking" and eliminate the phenomenon of "long running water"; Water-saving transformation of toilet facilities, green irrigation facilities and canteen water facilities with excessive water consumption. New construction and reconstruction projects should use water-saving appliances and equipment, and encourage qualified units to establish water treatment systems and rainwater collection systems during construction; Water-saving signs should be set up in water-using areas. It is forbidden to wash the vehicle directly with tap water.
(3) Strengthen the energy-saving management of official vehicles.
1. Strictly implement the management system for the use of official vehicles. It is strictly forbidden to use the bus to do private affairs; Try to share official cars in group activities; When there is no formal activity, all vehicles will be put into storage.
2. Enhance the rationality and scientificity of vehicle scheduling. Many leaders go to the same place or the same direction for meetings or work, and try to combine cars. It is recommended to travel by bus, and do not use vehicles when the distance is short.
3. Strictly implement vehicle fuel management measures and advocate low-energy driving. According to the vehicle type and exhaust volume, the fuel consumption of the bicycle is controlled within the approved standard. Strive to implement the "one car, one card" fixed-point and fixed-car refueling system to reduce fuel consumption. Adhere to scientific and standardized driving, maintain on time, and strive to reduce fuel consumption and maintenance costs.
4, strict bus use system, strengthen daily management, private use of buses is strictly prohibited.
(4) Save office expenses, control meetings, strengthen the management of office consumables and reduce office costs.
1. Strengthen the use and management of office supplies, standardize the equipment, procurement and recipients of office supplies, strictly equip with standards, and try to choose environmentally friendly, high-quality, low-cost and low-energy office equipment;
2. Make full use of online office system and system private network, draft, modify and distribute documents on electronic media as far as possible, and reduce the number of printing and faxing of paper documents;
3. Strictly control the distribution scope of documents, accurately verify the number of copies issued, and implement double-sided printing. Try not to copy the documents that can be circulated to reduce the number of duplicate copies;
4. Promote the use of recycled paper, vigorously advocate the repair and reuse of waste materials, and extend the service life and cycle of office supplies.
5. After the ink and toner of printers, copiers and fax machines are used up, try to replenish them and use them for many times.
6. All staff should bring their own water cups to minimize the use of disposable consumables such as paper cups.
7. Streamline meetings. For meetings that must be held, the theme should be clear and well prepared, and the time and scale of the meeting should be reduced as much as possible to improve the quality of the meeting; Meetings that can be held together should be held together as far as possible, regardless of form, and the meetings should be held diligently.
8. reduce the release. For official documents that must be issued, on the premise that the content is clearly stated, the length of official documents should be compressed as much as possible, and the documents should be issued in strict accordance with the scope of issuance, and it is not allowed to be repeated, repeated or expanded. Can use electronic documents without sending paper documents.
9. Reduce telephone charges, strengthen the management of office phones, and reduce the non-working use of office phones; Work telephone should be concise, make a long story short, and put an end to telephone chat; The office telephone is outsourced, and the part exceeding the budget is borne by the responsible person.
(5), strengthen the public * * * building energy management.
All newly-built, expanded and rebuilt government housing and office building projects must strictly implement the energy-saving design standards for public buildings, carry out rational energy use evaluation for construction projects, and strengthen energy-saving supervision and management from planning, design, evaluation, construction, supervision, completion acceptance and operation management. New energy-saving technologies, new processes and new materials should be given priority in new construction and renovation projects, the use scope of new and renewable energy such as solar energy should be expanded, the development and underground space should be fully considered, and low-energy green buildings should be built.
(six), the implementation of government energy-saving procurement.
It is necessary to strictly implement the relevant provisions of the Government Procurement Law and the Notice of the National Development and Reform Commission of the Ministry of Finance on Printing and Distributing the Implementation Opinions on Government Procurement of Energy-saving Products. It involves the procurement of capital construction, facilities and equipment, bulk office supplies, etc. It is necessary to carry out an evaluation with the theme of saving. First, investigate the utilization rate of existing equipment to avoid repeated purchase and construction.
For air conditioners, computers, printers, copiers and other office equipment, lighting products, water appliances, from the same priority procurement to mandatory procurement of energy-saving and environmental protection products.
(seven), to carry out energy conservation publicity and education.
According to the actual situation, organize cadres and workers to seriously study policies and regulations on energy saving and consumption reduction. Cadres and workers should start from themselves, start from small things, save electricity, save a drop of water, a liter of oil, a piece of paper and a penny. Organize an energy-saving publicity week for public institutions once a year, carry out various forms and rich contents of energy-saving publicity and education, widely publicize the significance of energy-saving work through TV, radio, websites, mobile phone messages, billboards, outdoor public service advertisements and other forms, enhance the energy-saving awareness of cadres and workers, popularize energy-saving knowledge, create a strong energy-saving atmosphere, advocate a healthy lifestyle and scientific consumption concept, and cultivate the cultural fashion of energy-saving institutions.
Organization and implementation of intransitive verbs
(a), in order to fully implement the "Regulations" and promote the energy-saving activities of rural public institutions in China, XXX rural public institutions energy-saving leading group was established, consisting of the following personnel:
Team leader: XXX
Deputy leader: XXX
Member: XXX
There is an office under the leading group, which is located in the DangZhengBan. XX is the director of the office, responsible for daily work, and XXX is the deputy director, responsible for energy consumption statistics.
(2) Establish a long-term mechanism.
1, establish and improve the energy consumption statistics system. Comprehensive and accurate statistics of the unit's office space, office supplies, water, electricity, gas, oil and other energy resources consumption data, and regularly submit energy consumption reports to the Municipal Energy Conservation Office.
2. Strengthen the management of energy-saving target responsibility. It is necessary to incorporate energy-saving work objectives into target responsibility management, decompose energy-saving objectives into management departments or posts according to the consumption of energy resources, and establish an annual target responsibility assessment system. The energy-saving work of each unit will be included in the year-end assessment. Energy-saving work is included in the important content of spiritual civilization construction as one of the conditions for selecting "civilized units".
Seven. safeguard measure
(a), in-depth publicity and launch. Vigorously publicize the significance of energy conservation in public institutions and the relevant laws, regulations, principles and policies of the state on resource conservation, publicize the rules and regulations and advanced models of energy conservation activities in public institutions, enhance the awareness of resource conservation and legal concept, and form a good fashion of "saving glory and wasting shame".
(2) Adhere to leadership and set an example. The key to energy saving in public institutions lies in people, and it is important to start with small things and stick to them for a long time. Leading cadres should take the lead in setting an example, and all cadres and workers should respond positively, act consciously, start from themselves, start from small things around them, and give full play to the leading role of demonstration.
The third part of the energy-saving implementation plan of public institutions
In order to further thoroughly implement Scientific Outlook on Development, vigorously promote the energy-saving work of public institutions in our company, and strive to build energy-saving companies, R2220XXR23 was issued according to the Regulations on Energy Conservation of Public Institutions and the Construction of East Bridge. According to the spirit of document No.81and the actual situation of our company, the implementation plan of energy-saving work of our company was formulated.
I. Work objectives
Achieve the following goals: based on 20XX years, realize the energy-saving task of saving electricity, water and fuel by 5% in 20XX years.
Second, public institutions pay attention to energy saving and consumption reduction.
Save electricity
1, reasonably set the indoor temperature. All offices should strictly implement the national indoor temperature control standards and reasonably adjust the indoor temperature of each office. Except for special purposes, the indoor temperature should not be lower than 26℃ in summer and not higher than 15℃ in winter, so as to turn off all power supplies when there is no one indoors.
2. Save electricity for lighting. Try to use natural light in offices and other places, and staff should make full use of natural light during office hours. In rainy days or offices without direct light, in principle, you can turn on the lights during the day, but you must turn off the lights when you leave the office. Don't turn on the light when the indoor brightness is enough; Turn off the lights when you leave the office, let people turn off the lights when they walk, and put an end to the phenomenon of "ever-burning lamps" and "daytime lights"; Turn off all kinds of electrical appliances after work.
3. Save electricity for office equipment. Computers, printers, photocopiers, fax machines and other office tools should be turned off at any time when not in use; Don't use it for a long time and cut off the power supply after work, reducing standby consumption.
4, consciously turn off all kinds of electrical power after work. It is forbidden to use high-power and power-consuming materials.
(2) Save water
Cultivate the water-saving consciousness of cadres and workers, achieve the good habit of turning off the tap at will, put an end to "running water" and effectively reduce water consumption.
(3) Save office supplies
1. Strengthen the use and management of office supplies. Standardize the fixed-point procurement, equipment and collection of office supplies. Carry out paperless office, reduce paper consumption, try to modify manuscripts on the computer, reduce the number of repeated printing, advocate double-sided paper, strictly control the number of documents printed, and improve the proofreading and printing quality of manuscripts.
2. After the ink and toner of printers, copiers and fax machines are used up, refill them and use them again.
(4) Save telephone charges and mailing fees.
1. Strengthen the management of telephone charges and reduce the non-working use of office phones.
2. The work telephone should be concise, make a long story short, and put an end to telephone chat.
3. Confidential documents should be transmitted to the confidential bureau and the secrecy bureau in strict accordance with the requirements, and general letters should be sent by centralized mail regularly to reduce unnecessary waste.
(5) Save the car
1. Strictly implement the management system for the use of official vehicles. It is strictly forbidden for buses to do private affairs. Try to share official cars in group activities. When there are no official activities at night, holidays and weekends, all vehicles will be put into storage.
2. Enhance the rationality and scientificity of vehicle scheduling. When leaving the car, all vehicles will be issued with a certificate of dispatch. Many leaders will meet or work in the same place or in the same direction, and they can combine vehicles as much as possible. Take the bus as far as possible when going out for non-emergency official business, and advocate walking or cycling back and forth.
3. Strictly implement vehicle fuel management measures and advocate low-energy driving. According to the vehicle type and exhaust volume, the fuel consumption of the bicycle is controlled within the approved standard.
Third, the energy-saving management system
1, strengthen organizational leadership. The energy-saving leading group of our company is headed by the general manager of the company, with the deputy general manager as the deputy head and the heads of various departments as members. The main responsibilities of the leading group are: to study and put forward the medium and long-term plans for the implementation of energy-saving policies in national, provincial and municipal public institutions; Formulate specific measures, methods and energy-saving related systems to promote the energy-saving work of public institutions around the world; Actively carry out energy-saving inspection and guidance of public institutions; Cooperate with relevant departments at higher levels to evaluate the energy-saving work of the whole company.
2, strengthen the energy-saving target responsibility management. Incorporate energy-saving work objectives into target responsibility management, and decompose energy-saving objectives into specific jobs in combination with energy and resource consumption. Incorporate energy conservation into the important content of spiritual civilization construction. Implement a special person to truthfully record the original data of energy consumption measurement according to the regulations, establish a statistical ledger, and make various energy consumption reports in time.
3. Carry out in-depth and sustained publicity and education on energy conservation. Seriously study the national and provincial policies and regulations on energy saving and consumption reduction and the spirit of relevant documents, regularly carry out energy-saving publicity activities, educate all cadres and workers to attach great importance to it and participate extensively to form a joint force, educate cadres and workers to start from now on, start from themselves, start from small things, save electricity, save a drop of water, save a liter of oil, save a piece of paper, save a pen and save a penny, and consciously form a good habit of thrift and care for public property.
(4) Strengthen supervision and inspection. All departments should fully clarify their responsibilities, raise awareness, combine special inspections with year-end assessment and appraisal, and incorporate energy-saving and consumption-reducing indicators into the annual target system.
# # # # # # # Limited.
20XX August 2 1 day
Guess you like:
1.20 17 implementation plan for energy conservation and emission reduction of government agencies
2. Model essay on the implementation plan of energy-saving work
3. Implementation plan of energy resources consumption statistics of public institutions.
4. Model essay on energy-saving management system of public institutions.