Usually in the process of household gas stoves, I believe many people will encounter fire. How to deal with such a thing, what methods can solve these problems, and what matters should be paid attention to at ordinary times? Here are some maintenance techniques for natural gas stoves.

1. If a gas stove is used and the stove head is not on fire, the maintenance of the gas stove should follow the following procedures for inspection:

1, first check whether the air switch is on; So as to ensure the normal gas supply of the gas stove,

2. Check whether the connecting trachea is flat or bent. If it is not deformed by pressure, then pick up the pot rack and see if the burner is hot.

3. If the gas stove does not burn during maintenance, see if the discharge needle discharges; If there is no discharge, the discharge needle is faulty and should be replaced;

4. If the discharge needle discharges during the maintenance of the gas stove, the valve body is faulty and should be replaced.

5. If the gas stove can't ignite during the maintenance of the gas stove, the ignition position is high. The user should be instructed to gently press the igniter several times, and then put it on the pot;

6. When the gas stove is maintained, the flame is too weak to reach the burner, indicating that the gas pressure is too low. Users of liquefied gas boilers suggest replacing new pressure reducing valves. Gas and natural gas shall be declared to the gas supply company. If the flame can reach the fire shield, but it doesn't catch fire, it means that the valve body is blocked, and the user is instructed to clean the nozzle with thin steel wire.

Second, the automatic shutdown of gas stoves in the maintenance of natural gas stoves can be solved by the following methods:

1. Replace the battery and see if the damaged side will burn the probe. The flame in the middle cannot burn to the probe. You have to burn the detector to put out the fire. Wait a minute, you can hold 10 seconds. When released and closed, the probe is a thermal sensor. It needs to be burned to make a fire;

2. In order to ensure continuous combustion, the gas path must be kept clear when the gas stove is maintained. The feedback mechanism of the gas stove is set to make the flame burn directly. When the flame is normal, the feedback loop sends out a pulse. The device provides a continuous gas supply signal. Otherwise, the pulse will close the solenoid valve.

The above is an introduction to the maintenance methods of domestic gas stoves. When using gas stoves at ordinary times, we should pay attention to whether there is air leakage and do a good job in gas fire safety protection.