1. experience of warning education
Several accidents in the case are closely related to the production work of our crown block workshop, and the thrilling reappearance of scenes once again sounded the alarm for us. The main reason for the accident is that the staff did not seriously implement the safety operation rules and did not work according to the rules, and the on-site management of the person in charge of the work was not in place and the implementation was not in place. The occurrence of the accident exposed a series of problems in safety management, which were manifested as unclear safety responsibilities of the staff, lack of on-site investigation and lack of basic safety skills of the operators. Facts have proved that if the dangerous point is not predicted, prevented and controlled, it may turn into an accident under certain conditions, and the consequences are unimaginable. Through learning, I once again strengthened my awareness of safety in production. Safety production should adhere to the idea of "safety first, prevention first" and effectively fall into daily work. The experience is as follows: 1 The problems exposed by the accident are: "violation of regulations, carelessness, weak sense of responsibility, lack of technology", failure to establish a firm sense of safety, recklessness, only trying to save trouble, quick plan and fear of trouble, which is the inevitability of the accident;
2. Lack of system and management. If it can't be strict, it can't be implemented, and the execution is poor. And in the inspection, only good news is reported, not bad news. Usually, the elimination of defects is not timely, the judgment of defects is inaccurate, and the daily inspection work is not serious, which leads to unsafe factors and accidents.
3. Hazard source management is a mere formality, and there are rules that are not followed, and there are rules that are not followed. The work is impetuous, the operators lack execution in on-site operations, and the control measures for dangerous points are weak;
4. Limited knowledge, large turnover of personnel in metallurgical industry, and the implementation of "three trainings" is not in place;
5, the use of new equipment, facilities, new technology is not thorough enough, personal knowledge and technology have great limitations; In a word, the accident occurred due to various limitations, which led to differences in understanding and laid many hidden dangers for safety production.
2. Selected warning education.
The company carries out safety warning education activities. For electric power enterprises, safety is life, safety is development, safety is benefit, and safety is the eternal theme of our electric power enterprises. Its significance lies in the stable operation of electrical equipment, the happiness and brightness of thousands of families and the sustained growth of the national economy. Not talking about safety, even a small mistake, may leave a huge hidden danger; If you don't understand safety, even a little negligence may interrupt the normal operation of the power supply system; Insecurity, even a small idea, may endanger life at work.
Looking back at the safety warning education film on April 1 1, we can see that there are many accidents in production safety. When we open this issue of the accident report, the scarlet title is so eye-catching, and each one is a lesson of blood, which is shocking.
To investigate the causes of these accidents, the most fundamental thing is the indifference of safety awareness and carelessness of thought. This kind of paralyzed thought is like an untimely bomb, which may explode at any time and may have terrible consequences. A person's indifference to public morality is only manifested in his poor personal quality; A person's numbness of ideals and beliefs, his loss is only to degenerate into a vulgar person; However, if a person's safety awareness is numb and muddles along, the consequences will be unimaginable, and it will eventually hurt not only himself, but also people around him and even enterprises.
"Safe production, people-oriented". How to ensure safety in production at work? I think, first of all, we should firmly establish the ideology of "everyone is responsible for safety in production". There is no small matter in safety work, and safety production should start from me and every small thing around us. Everyone talks about safety and everything is important. Only in this way can we ensure the stable situation of safe production in enterprises.
Secondly, we should maintain a high sense of responsibility. Do a line and love a line; Learn one line and specialize in one line, and implement safety in every work with a down-to-earth work style.
Thirdly, establish a sense of security worries, always tighten the string of "security", overcome the fluky psychology, eliminate sloppy thinking, and be strict, diligent, meticulous and practical. In our daily work, many accidents can be avoided if every person in charge of safety can establish the idea of "safety first", strictly abide by safety regulations, and check every link of safety production in place without missing a doubt or a detail.
"Hidden dangers are more dangerous than open flames, prevention is better than disaster relief, and responsibility is more important than Mount Tai". A sense of security is like a sword, and we will get happiness if we pay attention to it; On the contrary, he will show his ferocious face and punish us. When talking about human survival and environment, Marx said: Every time we plunder nature, we will be punished-environmental deterioration, volcanic eruption, floods and so on. Similarly, if our safety awareness is indifferent, we will be punished mercilessly. After all, there is only one life, so it's too late to learn from it.
Human life is precious and short, so we should cherish life and stay away from accidents. Safety is not only yours and mine, but also everyone's happiness. Let the eternal theme of safety be deeply imprinted in every employee's mind! Let us be safe every day and every moment!
Friends, everyone is responsible for safety in production. Let's start from now on, from ourselves, from every little thing around us. Everyone stresses safety and everything stresses safety. We stand on our posts, love our jobs and work hard to make our due contribution to a better tomorrow!
Power safety is the top priority for our employees in the power industry. In order to ensure the safe and orderly use of electricity, HEC has made great efforts to standardize the entire power supply and consumption network and create a safe environment for electricity use.
I have been engaged in power work in the company for many years, and I feel that the first-line power workers of HEC are a hard-working and dedicated team. While working hard, we should always keep safety in mind. Our life safety affects the hearts of parents and children, and it is the backbone and pillar to maintain a happy family. Through the internet, newspapers and other news media, in-depth study of the national power, transportation, coal and other industries safety accident reports.
The fundamental reason is that some cadres and workers do not pay attention to safety production and on-site safety management or have misunderstandings. In order to prevent accidents, we must keep in mind the guiding principle of "safety first, prevention first". Combining with the actual situation of power supply and consumption safety, it is an effective way to realize safety production by strengthening the responsibility of safety production at all levels, improving the safety awareness and safety operation skills of employees, implementing various rules and regulations, and eliminating ideological misunderstandings.
From the analysis of all kinds of accidents in the country, it is necessary to be cautious and not neglect paralysis to do a good job in safety production management. Safety management personnel or the first person responsible for production safety should first pay attention to it.
First of all, eliminate misunderstandings about safety equipment and safety facilities. With the rapid development of science and technology, the safety facilities and labor protection articles on the construction site have also realized high-tech automation, and have been widely used in production. Therefore, some safety managers are blindly optimistic, thinking that with these high-tech equipment, safety will be guaranteed, safety accidents will not happen, and work will be negligent. This kind of carelessness will bury hidden dangers and may cause accidents at any time.
3. Warning education experience selection
Every case has sounded the alarm for me. Through the study, I deeply reflected on three aspects: First, I reflected on whether I can meet the general requirements in practical work, and I just want to be a monk for one day, not pursuing practical results, and I can't see the gap with advanced models. The face of work has not changed for a long time, and I am still calm despite the storms; The second is to reflect on whether he is a setter in his daily work, unwilling to do it himself, a shopkeeper, a commentator and an improper combatant, which leads to the distortion of layers of conduction in his work; The third is to reflect on whether your efforts, hard work and enterprising spirit have declined, and whether you can't improve your personal ability and personal quality in actual combat. I have lost the confidence and courage to go forward. Facing the unprecedented deep water area, I dare not take risks, for fear that I will make many mistakes and take the initiative to attack. Comparing the case with the question I reflected on, I calmed down and looked in the mirror. As the department head of a county company, I should start from scratch, be strict with myself, adhere to a pragmatic attitude and do a good job in a down-to-earth manner.
First, constantly strengthen the study of political theory. Strengthen ideals and beliefs, improve self-cultivation, learn and understand the spirit of documents in time, and improve political theory cultivation. Purify your thoughts, change your ideas, carefully examine your own shortcomings, and always maintain a mental state of keeping pace with the times and pioneering and innovating.
Second, based on their own work. Give full play to the advantages of the team, insist on suffering first, and complete all tasks with a passionate attitude. Honest and self-disciplined, accept the supervision of organizations and the masses in the work, and do not exclude any work.
The third is to work very carefully. Insist on starting from small things, starting from small things, paying attention to getting along with colleagues, doing important things by yourself, never being a shopkeeper, starting from now, starting from things around us, and firmly establishing the spirit of selfless dedication.
"Take precautions, nip in the bud" Every self-study and self-warning is a growth. I will always keep in mind the standards, start from the dribs and drabs, and let the alarm bell ring.
4. Selected warning education.
The implementation of the responsibility system for production safety is not in place, the safety supervision and management can't keep up, the luck is serious, and the self-protection ability is poor. The educational film also introduces the tasks and objectives of safe production from different aspects; "Konikin's Law" and "Heinrich's Law" of safe production mode; Know the six characteristics of the accident. From big to small, in-depth and meticulous analysis, from shallow to deep, easy to understand, let me know little about safety knowledge and learn a lot of solutions to safety problems. More importantly, I should keep in mind "1: 29: 300", which is a "Heinrich's law" that plays an early warning role in my future and past work. It points out that if one violation occurs, there may be 29 minor accidents and 300 near misses, and there will be 1 1,000 potential safety hazards. This rule not only has important enlightenment for my future work, but also gives an early warning to our daily behavior, raising the safety awareness to the cautious attitude of "walking carefully with the moth veil lamp" and strengthening myself with scientific thoughts. Therefore, to do a good job in safety production, we must achieve a good atmosphere in which everyone stresses safety, always stresses safety, and stresses safety in everything, and everyone will be safe. Conduct safety education and training for coal mine employees. Without safety awareness, safe production is out of the question. We should know what our duties are, what we should do, what we should not do and what we should pay attention to. It is necessary to let the safety alarm bell ring, firmly establish safety awareness, strictly abide by rules and regulations, and put an end to illegal command, illegal command, unsafe behavior in violation of labor discipline and luck. The responsibility system for production safety should be put in place. According to the objectives and tasks of production safety, according to the division of labor among posts, the responsibilities are detailed and decomposed at different levels, so that the responsibilities are concrete, rational and standardized, so that whoever is in charge is responsible, there are rules to follow, and violations are prosecuted. Safety work should be in place. The responsibility system for production safety cannot be a mere formality, with much talk and little action. When carrying out every work, every movement and every work behavior, we must make plans, measures, preparations, inspection and supervision and acceptance in place. Only in this way can all the work be carried out safely and smoothly. In addition, all systems must be implemented by people, and I deeply understand that constantly improving my technical quality is the core to ensure safe production. Always use your head, recharge your batteries and consult frequently, so as to improve your technical quality, self-protection ability and ability to deal with unexpected accidents, so as to find violations and unsafe hidden dangers in time and stop them.
In a word, safety work can't just stay on the experience of watching promotional videos. In the end, we should conscientiously perform our duties in our own posts and do any behaviors and actions that meet the three regulations in all the work under the coal mine.
5. Selected warning education.
In June, the team conducted a series of safety warning education, and I had a deeper understanding and understanding of safety knowledge. Notice of personal injury or death accident of outsourcing unit. The hole climbed onto the belt, and the head reached into the sampling head without pulling out the sampler. His head was hit by the action of the sampling head and died after being rescued. We are also doing sampling survey, and this case has taught us a bloody lesson. When cleaning the coal plug of the sampler, the sampling equipment must be stopped. The cleaning operation cannot be carried out until the equipment is completely stopped. It is forbidden to clean coal under the condition of affecting personal safety. If it is found that the coal cleaning operation is carried out in violation of the operating rules, the personnel present must stop it. After cleaning the blocked coal, it is forbidden to clean it when the equipment rotates during the trial operation, and it can only be cleaned after the equipment stops again.
We will also have outsourcing staff in our work. It is necessary to strengthen the safety management of outsourcing units. Usually, we should pay attention to the training and safety education of outsourcing personnel.
Strictly implement the "Electric Power Safety Work Regulations" and "two votes and three systems" in the work, and resolutely put an end to inertia violations. Continue to strengthen the accountability of illegal command, illegal operation and violation of labor discipline, and make timely rectification. At ordinary times, we should seriously organize learning and learn from accidents.
Casualty accident is a typical production safety accident caused by field equipment. After many times of processing and maintenance, our train sampler is equipped with various protective equipment such as protective fences. Usually, the inspection of equipment and devices should be meticulous, and all potential safety hazards should be investigated, and more leaks should be found to fill gaps. Pay attention to the running chain. If it is operated by multiple people, pay attention to communication and cooperation.
Yesterday, our team conducted an accident emergency drill. We learned the use of fire extinguishing devices. During the pre-inspection of belt sampling equipment, it was found that the electrical circuit of belt sampler was aging and short-circuited, which caused a fire. We studied and rehearsed the whole emergency process. Through this exercise, we sounded the alarm of fire safety and learned the emergency measures of fire accidents.
At yesterday's meeting, the monitor told us a lot of safety problems and summarized some dangerous points in sampling work. Some dangerous points that should be paid attention to when belt sampling, power failure, equipment trial operation, work ticket and the influence of mental state at work on work. The sanitary problem of sampler is emphasized.
Safety is a wake-up call that we should ring every day. We should do a good job in safety study and education and implement safety production in every corner.