Exploratory oscilloscope
In MulTIsim, the oscilloscope is located on the right side of the instrument bar, followed by the first multimeter. It is an oscilloscope coffee in MulTIsim. It has two channels, so you can easily understand the mystery of the two signals.
Play with an oscilloscope
Once you find the oscilloscope, you can easily connect it to the circuit. It has two channels, allowing you to understand the mystery of two signals at the same time. You can connect channel A in parallel with the resistor, observe the voltage changes at both ends of the resistor, add the voltages at both ends of the capacitor, and channel B is on standby at any time!
colorful
MulTIsim oscilloscope provides a wealth of color options, so that you can easily distinguish each channel. Just right-click the wire connecting the positive electrode of channel B, click on the color part, and choose your favorite color as you like!
Observation signal
Turn on the analog switch and double-click the oscilloscope to uncover the mystery of the signal.
Customized signal window
MulTIsim oscilloscope provides rich parameter setting options. Observe that AC signal is selected, DC signal is selected, one channel is temporarily ignored, and 0 is selected. Channel B also has an inverting switch, which allows you to see the other side of the signal. The trigger mode is flexible, and the edge and level can be selected. Adjust the time axis and channel ratio to keep the signal under control!
Explore the mystery of electronic signals
Come to MulTIsim world and explore the mystery of electronic signals with oscilloscope!