Department of mechanical engineering was established in July, 2004, and now it has two majors: mechanical manufacturing and automation, hydraulic and pneumatic technology. There are several departments under the department, such as the department office, the general branch of the department, the teaching and research section of mechanical manufacturing, the machining training center, and the practical training bases in the school, such as the mechanical CAD/CAM center, the hydraulic and pneumatic training center/the CNC equipment maintenance and repair training center. There are 2300 students, 49 faculty members and 20 part-time teachers inside and outside the school, including 9 teachers with senior titles and 8 teachers with intermediate titles. Among the teachers, there are 8 qualified technicians, 4 national numerical control referees, 3 senior assessors and 8 intermediate assessors. 1 1 "double-qualified" quality teachers.
Department of Electrical Engineering
The Department of Electrical Engineering now offers six majors and two general directions. The six majors are: electrical automation technology, mechatronics technology, detection technology and application, applied electronics technology, power system automation technology, and wind power generation equipment manufacturing and maintenance. The two major directions are: the installation and maintenance of armored vehicle electrical equipment, the special professional direction of military industry and the professional direction of building automation technology. Among them, the major of electrical automation technology is a key major in the construction of national demonstration colleges supported by the central government, and the three majors of electrical automation technology, detection technology and application, and mechatronics technology are brand majors in Inner Mongolia Autonomous Region.
Department of Vehicle Engineering
The Department of Vehicle Engineering was established in 1999. At present, there are two majors, automobile manufacturing and maintenance, automobile operation and maintenance, which are designated by the Ministry of Education to undertake the training of skilled talents in the field of automobile operation and maintenance in two-year higher vocational colleges. There are automobile teaching and research section, engineering drawing teaching and research section and mechanical foundation teaching and research section, and there are automobile training base, automobile electrical equipment laboratory, testing laboratory and mechanical disassembly laboratory. There are 28 employees, including 22 full-time teachers and 3 experimenters. 9 associate professors, 1 senior lecturer, 2 senior engineers, 7 lecturers and 3 experimenters; There are 5 teachers with master's (or degree) degrees, 4 of whom are studying for master's degrees. There are more than 300 students, including two years from ordinary high school, three years from secondary vocational education and five years from junior high school.
Department of humanities and art design
The Department of Humanities and Art Design was established in 2004, offering six majors: advertising design and computer production, interior design, multimedia design and production, secretarial, industrial design, and cultural industry operation and management. At the same time, it also undertakes the teaching tasks of basic courses such as mathematics and Chinese in all majors in the hospital and the training and testing of Putonghua level of teachers and students in the hospital. There are: advertising teaching and research section, Chinese teaching and research section, mathematics teaching and research section and Putonghua proficiency training and testing workstation. There are 42 faculty members in the whole department, including associate professor 1 1 person and 9 "double-qualified" teachers. At the same time, a group of off-campus experts with rich practical experience and high theoretical level were hired as part-time teachers. With strong teaching staff and rich teaching experience, he has published more than 30 papers and compiled more than 0 textbooks 10 in the past three years. Teachers in the physics and chemistry teaching and research section have also completed scientific research projects such as magnetic levitation guide rail, digital image conversion and stereo imaging system, which meet the needs of practical teaching. At present, there are 393 students in school, with orderly management, superior learning, strong artistic atmosphere and endless works.
Department of materials engineering
The Department of Materials Engineering is a large-scale department with a long history in Baotou Vocational and Technical College. The department of materials engineering now has three majors: metal materials and heat treatment technology, welding technology, automation and nondestructive testing technology. Among them, metal materials and heat treatment technology is the earliest specialty established since the school was founded, with long running time and rich teaching experience. In 2008, it was rated as a brand specialty in Inner Mongolia Autonomous Region. Welding technology and automation specialty is one of the first five-year higher vocational colleges in China. In 2006, it was rated as a brand specialty in Inner Mongolia Autonomous Region. In 2007, the welding technology training base was established as a training base for higher vocational education of national defense science, technology and industry. In 2008, the specialty of welding technology and automation was approved as the central key construction specialty of national demonstration higher vocational colleges. 20 10 welding technology and its automation specialty was rated as a national specialty for training skilled talents in mechanical industry. According to the urgent demand of modern industrial enterprises for quality inspection technicians, with the approval of the education department, the department of nondestructive testing technology opened this specialty on 20 10. Relying on the strong technical force and advanced equipment resources of the quality inspection departments of two super-large national defense industrial enterprises in the region, combined with the good teachers' conditions and practical teaching conditions of this department, nondestructive testing technology specialty has become a new specialty with high starting point and prosperous job market.
Department of Economic and Trade Management
On the basis of business English, property management and business enterprise management, the Department of Economic and Trade Management has successively set up nine majors, including computerized accounting, hotel management, real estate management and evaluation, applied English (preschool education direction), foreign-related tourism and construction engineering technology. In the process of economic and trade brand building, around the working ideas of combining theoretical teaching with professional practice, combining academic education with social-oriented vocational qualification training, and combining student activities with professional training objectives, the leading group of the party and government led all the teaching staff to make positive progress, blaze new trails, unite and cooperate, and achieved brilliant achievements one after another, among which the specialty of accounting computerization is the characteristic specialty of the college.
Department of Computer and Information Engineering
The Department of Computer and Information Engineering previously belonged to the Department of Electronic Engineering. Independent in August 2004, mainly training practical and skilled talents in computer network application and computer software application. The department consists of computer application teaching and research section, computer software teaching and research section, computer network teaching and research section, department office, student office, youth league branch and other departments. The Department of Computer and Information Engineering now has four majors: computer application technology, computer network technology, computer information management, computer hardware and peripherals. Set up basic computer room, software room, network room, computer hardware training room and network training room. The Department of Computer and Information Engineering combines the advantages of computer specialty, and tries to embody the advanced nature and practicability of contemporary computers in the setting of computer courses, so as to make the trained talents meet the needs of the current market. In the daily teaching process, make full use of computer multimedia teaching means to make students accept new knowledge and technology quickly and efficiently. At the same time, we strengthened the research and development ability of computers, and used the reasonable resources of our department to design and develop a large number of practical and effective network management software for the college's network application system, which not only trained the teaching staff, but also improved the college's computer application level and improved the college's office automation level to a certain extent.
Department of numerical control technology
The CNC Department of Baotou Vocational and Technical College was established on March 5, 20 10, and it is a young department. The number of students in the department/kloc-more than 0/000, and there are 32 faculty members. There are three majors: numerical control technology, application and maintenance of numerical control equipment, computer-aided design and manufacturing, which undertake the teaching tasks of the whole department. Among the three existing majors, numerical control technology is a major supported by the central government in the construction of demonstration colleges, an autonomous region-level brand major, and a national talent training major in short supply. The application and maintenance of CNC equipment is a brand specialty in the autonomous region. The Department of Numerical Control Technology has four on-campus training bases: CNC machining training base, modern manufacturing training center, CNC machine tool maintenance training center and mechanical CAD/CAM training center, with a total area of nearly 4,200 square meters and total equipment assets of more than 20 million yuan. There are nearly 30 off-campus training bases with good cooperation and stability.
Department of material forming technology
The Department of Material Forming Technology 20 10 was split from the Department of Material Engineering, and now it offers four majors: mold design and manufacturing, material forming and control technology, metallurgical technology, forging and stamping technology. There are teaching and research sections for mold design and manufacturing, material forming and control technology, metallurgy and forging, as well as teaching, production and scientific research places such as mold manufacturing training center, forging technology training base, mold fitter training base, material forming training base, mold design and process implementation training room and mold CAD/CAM training room. In 2002, the specialty of mold design and manufacturing was identified as the pilot specialty of higher vocational education reform by the Ministry of Education, and in February of the same year, it was also identified as the project of "Construction of Excellent Specialty of Mold Design and Manufacturing". In 2005, it became the first brand specialty in the autonomous region, in 2006, it became a member of the Teaching Steering Committee of Mould Specialty of Machinery Industry Education Federation, in 2008, it became a key construction specialty of national model colleges, and in 20 10, it became a skilled person in the national machinery industry. Driven by the mold specialty, other majors have also achieved good development. In 2008, the specialty of material forming and control technology became the brand specialty of the autonomous region. After three years' operation, metallurgical specialty is becoming more and more mature. The first batch of graduates were sent away on 20 1 1, and the employment situation is gratifying.
Department of Social Sciences
Social science is responsible for and undertakes the teaching and scientific research of Marxism-Leninism theory course, moral education course, ethnic theory course and situation policy course in the whole hospital, which occupies an important position in the ideological and political work in the whole hospital and is the main channel for ideological and political education for college students. For a long time, under the correct leadership of the college party Committee, the education and teaching of ideological and political theory courses have made certain achievements. The theoretical system of Mao Zedong Thought and Socialism with Chinese characteristics has been deepened in textbooks, classrooms and students' minds, the teaching methods have been gradually improved, and the age structure and academic structure of teachers have been continuously strengthened, which has played an important role in guiding college students to strengthen their belief in Marxism and socialism, enhancing their confidence in reform, opening up and modernization, and enhancing their trust in the party and government. At present, the Ministry of Marxism-Leninism is adhering to the spirit of unity and hard work, advancing with the times, constantly exploring new ways to improve the effectiveness of ideological and political theory courses under the new situation, and striving to cultivate high-quality talents with both ability and political integrity!
Physical education teaching and research section
There are 20 teaching and research staff in the Department of Physical Education, including ball teaching and research section, comprehensive teaching and research section, military theory teaching and research section and students' physical health testing room. Mainly responsible for physical education teaching, extracurricular sports activities, organizing large-scale sports competitions, military theory teaching and students' physical health test. Physical education class is divided into two parts: basic courses and elective courses. According to the existing conditions, football, basketball, volleyball, badminton, table tennis, tennis, swimming, aerobics, martial arts, bowling and so on/kloc-0.