In order to strengthen the management standard of clean workshop and improve the qualified rate of products, it is necessary to formulate relevant regulations. Here I'd like to introduce some relevant information to you, hoping to help you.

1. Qualification of personnel entering the clean room

1. 1 Only trained personnel who have been audited by the supervisor can enter the clean room.

1.2 personnel entering the clean room shall abide by the safety regulations of the clean room.

1.3 If unauthorized employees and foreign guests need to enter the clean room, they should inform the production department first or be accompanied by the personnel of the Ministry of Commerce and the person in charge of the production department before entering.

1.4| Unauthorized personnel are strictly prohibited from entering the clean room.

2. Precautions before entering the clean room

2. 1

Employees and foreign guests must be accompanied by relevant personnel when entering or leaving the clean room.

2.2 Anyone who enters the clean room for work or visit must change into clean clothes according to regulations.

2.3 Personal items, handbags, books, snacks and other tools not used in the clean room are not allowed to be brought into the clean room; Maintenance manuals and tools should be put back immediately after use.

2.4 When materials enter the clean room workshop, they need to be unpacked and wiped clean outdoors, put into the cargo air shower room and brought into the clean room workshop.

2.5 In the clean room workshop, you are not allowed to eat, drink and be merry or engage in other things unrelated to production.

3, into the clean room program

3. 1 When stepping on the floor of the shoe changing area, you must take off the outer shoes.

3.2 The outer shoes are placed in the total shoe cabinet; Enter the dressing room and put on clean clothes, and then enter the shower room and workshop as required.

3.3 The number of people entering the shower room at the same time shall not exceed 4, the number of people entering the clean room shall be limited to 2, and the number of people leaving the clean room shall be limited to 4.

3.4 In order to avoid affecting the normal air circulation and dust removal effect, personnel should not lean against the door or wall of the air shower room; Personnel must stand on the dust pad in the center of the shower room, shaking their hands slightly and rotating 360 degrees to help dust fall.

3.5 The normal direction of tuyere should be downward blowing. Please don't fiddle with the adjustment direction of the tuyere at will to achieve the maximum dust removal effect.

3.6 Hair must be covered in a dust-free cap, and a hair hood can be used if necessary.

3.7 The nose and mouth must be covered with a mask, which should be discarded after use and cannot be reused; Hair must be tied into clothes with clean clothes.

3.8; Dust-free clothes wearing scheme: 1 mask 2 dust-free clothes 3 dust-free shoes. Put on dust-free clothes, masks and dust-free hats, zip up dust-free clothes, put on dust-free shoes, and make sure the clothes are clean before entering the dust-free workshop.

4. Precautions for clean room

4. 1 Paint or articles entering the clean room must be cleaned and dusted with air first.

4.2 It is forbidden to write and scribe on the equipment.

4.3 Avoid sticking paper to the machine with adhesive tape.

4.4 When in use, it must be placed at the dust outlet to avoid dust pollution to the product.

5. Waste disposal

5. 1 All wastes and used chemicals should be treated and dumped in the specified way.

5.2 Keep clean and tidy at all times. Don't leave the garbage to others. Don't throw away gloves, finger covers and waste. Put them in the trash can.

5.3 Do not mix acid with organic solvent to avoid explosion.

5.4 Waste organic solvents should be stored in special containers, not in the drainage system.

6, other matters needing attention

6. 1 Don't walk back and forth in the clean room.

6.2 Irrelevant personnel are prohibited from staying in the dust-free area.

7, equipment use rules

7. 1 All equipment shall be started, shut down and debugged according to the steps specified in the operation manual, and must be started by the person in charge on duty.

7.2 If the startup or debugging is affected by faults or uncertain factors, the person in charge of startup shall report to the leader and wait for instructions before handling.

7.3 Without the approval of the leader on duty, it is not allowed to change the setting state of the clean room spray paint device at will.

7.4 Please record the usage of equipment and the temperature and humidity of clean room and spraying room.

7.5 Any pollution or damage caused by improper operation of the device shall be reported as soon as possible and punished. If it is deliberately concealed, once it is seized, the punishment will be aggravated.

7.6 The spray gun and spraying machine shall be cleaned according to regulations after use.

8, clean room safety specification

8. 1 When working in a clean room, it is necessary to know exactly the possible dangers in each station and take safety precautions.

8.2 Use some protective articles, such as glasses and gloves.

8.3 The working area should be kept clean.

8.4 All chemicals shall be marked in detail.

8.5 Wash your hands before eating after using chemicals.

8.6 When dealing with wastes, the relevant regulations on waste disposal shall be observed.

8.7 Be familiar with the steps of emergency response and the location of emergency response equipment (such as fire extinguishers and emergency lights) in the work area.

8.8 It is forbidden to bring all kindling into the dust-free workshop.

9, clean room workshop system punishment

9. 1 In case of violating the above provisions and causing economic losses to the company, administrative warning, demerit recording or dismissal shall be given according to the losses.

9.2 Mobile phones used by personnel entering the clean workshop should be stored in the closet or brought into the clean room in a closed state. Those who use mobile phones in the clean room will be punished immediately by demerit and dismissal. ?