1. Open the CAD software and create a new drawing file.
2. Select an appropriate measurement unit in the drawing file, such as millimeters or inches, so as to be consistent with the measurement unit of Zeiss double cantilever coordinate measuring machine.
3. Set the coordinate system of the drawing file as required. You can choose global coordinate system or local coordinate system to match the coordinate system of Zeiss double cantilever coordinate measuring machine.
4. According to the actual needs, set geometric figures and measuring points in the drawing file, and ensure that they are consistent with the measuring points of Zeiss double cantilever CMM.
5. Ensure that the measuring tools and functions in CAD software meet the requirements of Zeiss double cantilever CMM, so as to accurately measure the size and shape.
It should be noted that because the version of CAD software is different from the specific model of Zeiss double cantilever coordinate measuring machine, the specific setting steps may be different. Therefore, before setting, it is recommended to refer to the user manual of Zeiss double cantilever coordinate measuring machine or consult relevant technical support personnel to ensure the correct setting of CAD software.
In addition, the setting of Zeiss double cantilever coordinate measuring machine in CAD software is only a part of it, and the calibration of coordinate measuring machine and the setting of operating parameters are also needed. Therefore, before using Zeiss double cantilever CMM for CAD measurement, it is suggested that the equipment should be fully trained and understood to ensure the correct measurement results and operation flow.