Methods/Steps 1 Select sine wave and oscilloscope modules from MATLAB/SIMULINK component library and connect them. Then run the model, and the resulting data will be written into the range. Just double-click the range module with the left mouse button. You will see its operation interface and simulated waveform 3. If you want to enlarge the waveforms of the X and Y axes, you can select the X and Y axis magnification button 4. If you feel that the amplification effect is not good, you can select the auto-zoom button to return to the original waveform 5. The most important thing is to set the range parameters and select the parameter setting button. The parameter setting operation interface 6 will appear. In this interface, you can enter the number of detector interfaces and whether to write data into the MATLAB workspace.