The purpose of 1 is to implement the safety policy of "safety first, prevention first", ensure the standardized operation of employees, observe the rules and discipline, improve the safety quality of all construction employees and promote the safety management of engineering construction. In order to prevent casualties, overcome people's unsafe behaviors, ensure personal safety and equipment safety, and standardize the safety education, safety and training management of 2-300mw new projects of China * * * * Thermal Power Co., Ltd., the scope of application of this standard 2 is specially formulated. This standard is applicable to the safety education and training management of 2-300mw new projects of * * * * Thermal Power Co., Ltd. Ltd. 3 Reference Standards and Related Subsystems 3. 1 Reference Standards 3. 1 Management Measures for Safety, Health and Environment of China * * * * * *; 3. 1.2 Safety Work Regulations for Electric Power Construction DL5009.1-2002; 3. 1.3 Law of People's Republic of China (PRC) on Work Safety; 3. 1.4 People's Republic of China (PRC) national standard "Management Rules for Safety Technical Assessment of Special Operators"; 3. 1.5 Regulations of the State Council on Building Safety Management; 3. 1.6 state administration of work safety's opinion on safety technology training and assessment for special operators (No.42/kloc-0 (2002) of the General Administration of Work Safety); 3. 1.7 Measures for Supervision and Management of Operators of Special Equipment issued by AQSIQ (Order No.70 of AQSIQ). 3.2 related subsystems 3.2. 1 HSE management; Information management; 3.2.3 Document management; 3.2.4 Evaluate and improve management. 4 Definition of technical terms 4. 1 Three-level safety education: refers to company-level safety education, engineering (specialty) or department-level safety education, and team-level safety education, collectively referred to as three-level safety education. 4.2 Five innovations: refers to new products, new technologies, new processes, new materials and new equipment. 4.3 Special operations: refer to operations that are prone to casualties and cause great harm to operators, others and surrounding facilities. 4.4 Special Operations Personnel: The scope of special operations personnel shall be implemented in accordance with the Safety Technical Training and Assessment Opinions for Special Operations Personnel issued by state administration of work safety. 5. Responsibilities 5. 1 Standard Supervisor * * * * The Deputy General Manager of Infrastructure of Thermal Power Co., Ltd. is the supervisor of this standard, responsible for the overall management of this standard, and supervising and inspecting the effectiveness of the 2-300 MW new construction contractor of * * * * * Thermal Power Co., Ltd. in implementing this standard. 5.2 executor of supervision, implementation and improvement of standards * * * * The head of safety supervision department of Thermoelectric Co., Ltd. is the executor of supervision, implementation and improvement of this standard, and is responsible for checking the implementation of this standard by this department, solving or handling the positive problems existing in the implementation of this standard in time, collecting and putting forward suggestions for improving this standard, and revising this standard after the consent and authorization of the head of this standard. 5.3 Each construction unit shall be responsible for the three-level safety education of its own construction personnel, and establish a three-level safety education card for employees (appendix 1). 5.4 The supervisor shall be responsible for daily inspection of the implementation of safety training and education and the certification of special operations. The safety supervision department shall, in conjunction with the construction project supervisors, check the implementation of each construction unit at any time. 6 Execution Procedure 6. 1 All employees (including interns and substitute trainees) newly allowed to participate in the * * * * project construction must receive safety education and training step by step within their respective organizations as required, and can only enter the construction site after passing the education and training of relevant safety regulations. 6.2 At the beginning of each year and before the new project starts, the * * * * project company, contractor, commissioning unit and supervision company shall organize employees to study and test the safety work regulations, safety construction management regulations and safety rules and regulations formulated by the * * * * project company, and the safety supervision department of the preparation office will conduct inspection. Only after passing the exam can they take up their posts. Examination results should be registered, and those who fail the examination should make up the examination within a time limit, and they can only be employed after passing the examination. 6.3 The contractor shall provide special safety education and training to the operators, workers and related personnel engaged in "Five Innovations", and shall not operate until they have passed the examination. Because there are many unknown factors in the "five new" operation, education should highlight the safety knowledge and skills education of emergency response, as well as the protection and self-help training in emergency and dangerous situations. 6.4 Construction and testing personnel (including technicians) must learn installation and testing procedures. When installing new equipment, be sure to read the instructions carefully and remember them, and install and operate according to the regulations and related requirements. 6.5 All personnel engaged in special operations must receive professional technical training and learn safety regulations, and can only operate independently after passing the examination by relevant departments and obtaining evidence. Those who fail to pass the examination, take back their certificates, stop working, and can only work at their posts after passing the second interview. Special operations personnel must obtain a special operation certificate (IC card) issued by the safety production supervision and management department before they can engage in special operations. 6.6 Newly-appointed leaders at all levels should learn the policies, regulations and rules on safe construction (production) and post safety responsibilities. 6.7 Full-time safety supervision and management personnel must obtain corresponding qualifications before engaging in safety supervision and management. 6.8 Anyone who has the right to be the working ticket issuer, working director and working permit holder must pass the safety examination, obtain the consent of the unit leader and be approved by the chief engineer of the * * * * * project company before it can take effect. 6.9 The list of approved working ticket issuers, working directors and work licensors must be published in the form of documents according to the requirements of safety regulations and sent to relevant units and departments. 7 Inspection, evaluation and feedback standard executors should regularly check the standardization of this standard in their own departments. Fill in the evaluation form once every quarter (see Annex 2) and report it to the person in charge of standards for evaluation. According to the feedback, the person in charge of standards evaluates the implementation of this standard in various departments and decides whether to upgrade this standard. The above is an introduction to the Standards for Education and Training of Engineering Safety Construction. For more information, please visit Zhong Da for consultation.

For more information about project/service/procurement bidding, and to improve the winning rate, please click on the bottom of official website Customer Service for free consultation:/#/? source=bdzd