Summary of technical work 1

Since graduation in 20xx, I have been engaged in road and bridge engineering construction inspection, construction engineering and pipe pile construction, and quality inspection of building materials. I have been working hard for more than 7 years, taking every detail of my work seriously, and I have gained a lot from grass-roots work. I slowly combined theoretical knowledge with practical experience, and made great progress from professional technical knowledge to working ability through continuous study, continuous summary and continuous exploration. I summarize here as follows:

1, the ideology has been greatly improved. As soon as I left school, I entered the project department. The project is located in a remote and desolate place. It is inconvenient to eat, live and travel, and my thoughts fluctuate. I am controlled by my own will, and my willpower is very strong, which dominates my thoughts. When I am in trouble, I won't back down. Think independently at work, and have good ability to deal with general emergencies. When you encounter a problem, you should stop sniffing, and learn to look for the internal reasons through the surface according to the situation of the problem, so as to be kind to your work and further improve your efficiency. My endurance has made great progress, and I no longer have the idea of giving up halfway in my work. In view of the problems that have arisen, I will trace back to the source, find out every reason, follow the trail, and never stop until I solve the problem.

2. Keep learning professional knowledge and improve professional skills. At the engineering site, I left sweat on every detail step by step, but what I learned was professional knowledge. Through continuous research, the knowledge in books is combined with reality, and the value of knowledge is realized in real things. I insist on hands-on operation. I have done everything I have learned from books, and I have done it at least once in reality. In the process of operation, I also found many blind spots, which made me progress step by step. Professional knowledge such as building construction, building materials and project cost is gradually enriched. At this time, I will never forget to thank my master and leader for their guidance.

Don't do what you don't expect. While working, I learned to be a man. In the same office, we all have many colleagues. When colleagues work together, they will inevitably encounter contradictions. At this time, I learned to reflect on myself. When asking others to do the same thing, first think about whether you can do it. If you can't do it yourself, you can't ask others to do it. Treat people around us with more tolerance and smiles, so that our work will be more enjoyable and efficient. Be a man before you do anything. Only a good personality will make it easier for others to get in touch with you, work can be better coordinated and communicated, and problems can be solved through mutual help. There is only an eternal team, not an eternal individual.

Working for seven years, starting with the performance of raw materials such as coarse and fine aggregate, cement and steel water reducer. At the project site, I learned the production technology of various raw materials and constantly studied their physical and chemical properties. Always read relevant books to understand the influence of various raw materials on concrete structures, and then constantly learn various construction techniques and solutions after problems arise from the teachers on site. I have been exposed to various forms of underground structures and above-ground structures. Including the construction of subgrade, pavement, bridge and various structures, I have been exposed to techniques such as powder jet grouting pile, bored pile, pipe pile, underground continuous wall and open caisson construction just for the construction of pile foundation, and I am also learning field management, such as when to prepare the quantity of materials, machinery and materials.

In Shandong Jianhua Guo Xin Pipe Pile Co., Ltd., I have been studying books on concrete mix design and concrete quality control, strengthening communication with cement suppliers and water reducer suppliers, mastering the methods and control points of analyzing concrete fluctuation, and constantly exploring ways to reduce concrete mix design cost, improve concrete durability and mix high-performance concrete. At present, I have more work experience. At the same time, the construction and design of pipe pile foundation have been studied. At present, I am familiar with the production, construction and design of pipe piles.

I will continue to learn and improve my comprehensive quality, exercise my personal character, constantly improve my professional and technical ability, improve my on-site management ability, and be a technically comprehensive manager.

Summary of technical work II

20__ years will soon pass, and a new year will soon begin. Looking back on the work experience and lessons of the past year at the time of bidding farewell to the old and welcoming the new is conducive to fostering strengths and avoiding weaknesses in future work and doing technical work better. The following is a summary of the work in the past year:

First, the main work this year

In the past year, I participated in the joint review of drawings for new projects and informed the construction personnel of the joint review contents in time. After the blue prints.the design, timely prepare the construction organization design and technical disclosure, and distribute them to the construction personnel. During the construction process, a number of newly-built projects and projects under construction repeatedly negotiate to change the water, electricity and heating projects according to Party A's requirements. Due to the lack of design drawings that meet the use function, Party A often makes temporary changes during the construction process. Changes that can be made before construction are timely and accurate, while some changes cannot be signed before construction. They will sign it as soon as the construction is completed.

For projects under construction and newly started projects, timely and accurately collect material certificates, conduct material tests, concealed works acceptance, inspection lot quality acceptance and divisional works quality acceptance according to the project image progress, and find the signatures and seals of Party A's land engineer and supervision engineer in time to ensure that the dates of each inspection lot, divisional, concealed acceptance and material test of construction materials can be consistent with the actual construction date and meet the requirements of data compilation.

Second, the effectiveness of the work.

In last year's work and daily life, we found some common quality problems in hydropower heating construction, such as insufficient leakage sealing height of toilet and large height difference; The joint between washbasin and drain pipe in toilet is not sealed; The distance between pipe clamps of water supply pipeline is too large, and the installation is not firm; Unclear color separation of wires; The installation elevation of switch and socket is quite different; The broken wire card in the lightning protection box rusts;

It not only violates the construction quality acceptance standard, but also directly affects people's life problems. The kitchen and bathroom smell, but the residents can't handle it. In view of these problems, specific requirements were put forward to the construction team leader and team leader at the beginning of each construction site, with special emphasis on the seriousness of this problem, and patiently explained to them the requirements in the specification and the harm to people's lives. In the projects completed this year, such problems have basically been eliminated.

Third, the remaining problems in the work.

Engaged in the data sorting and budget and final accounts of the installation office for two years, deeply feeling busy and responsible; Major issues often attach importance to one end, ignore the other end, nod lightly, can not work systematically in all directions, and lack corresponding experience. When the factory inspects all engineering materials, the setting of inspection points in the quality acceptance of the inspection lot is not clear. The supervision and seal of some projects were delayed, and the entry materials of individual projects were not submitted to the supervision and inspection in time.

Due to many projects and heavy tasks, individual engineering data cannot be synchronized with the projects. In some projects, the radiator and switch socket are constructed after the doors and windows are installed, which leads to the delay in obtaining the engineering change visa and affects the preparation of final accounts. Although it can't affect the project quality and project acceptance, I always feel that I haven't done my duty as a technician and budget officer, and I will try my best to do better in my future work.

Four. Future work plan

By summing up the work in the past year, we can find out the shortcomings in our work so as to overcome them in our future work. At the same time, we need to read more books, study norms and related documents, master professional knowledge, improve our working ability, strengthen our sense of responsibility, and do our personal work in time.

Summary of technical work 3

My name is _,1I graduated from Shaanxi Forestry School in July 1993, majoring in forestry economic management. In September of the same year, he was assigned to work in Nanzheng Wood Processing Factory, and transferred to Nanzheng Shui Sheng Forestry Workstation in March of 1998. Since then, he was rated as a forestry technician by the county vocational assessment team in August 20. Since I entered this station, I have been mainly engaged in forestry technology popularization, prediction and prevention of forestry pests, logging design for personal use, returning farmland to forests, natural forest protection and afforestation. Up to now, I have worked hard, overcome difficulties, be realistic and innovative, and have not made too many mistakes. The specific summary is as follows:

First, actively publicize forestry science and technology, and widely promote the application of new forestry technologies. In the activity of "sending science and technology to the countryside", relevant experts from the Municipal Association for Science and Technology were hired to publicize and hold forestry science and technology training courses for the majority of forest farmers. Over the years, 323 rural technicians have been trained. At the same time, through newspapers, internet and other forms, more than 800 copies of various forestry technical materials related to the development of our city were widely collected. Thus, the harmony and unity of improving ecological benefits and economic benefits are realized, and the scientific and technological content of forestry technology is further improved.

Two, solidly carry out the investigation, prediction and prevention of forestry pests, and summarize the summary of forestry professional and technical work. Widely publicize and raise awareness. Especially from 20 to 20, I participated in the survey of exotic pests in forestry for two consecutive years. After two years' efforts, we have basically found out the species and harm status of exotic pests in our region. * * * 15 larval specimens were collected. According to the investigation, the situation was reported to the county forest defense office in time, which provided first-hand information for the county forest defense office to formulate effective prevention and control plans. So as to effectively curb the large-scale occurrence and spread of forest pests and diseases.

Third, actively participate in the pilot work of container seedling raising of Camellia oleifera in our station, learn from comrades who know the technology humbly, master the technical points of container seedling raising of Camellia oleifera in a down-to-earth manner, and observe the growth process of container seedling raising of Camellia oleifera. And suddenly learned about the life habits of Camellia oleifera through the Internet.

Four, conscientiously do a good job in the cutting design of wood for personal use. According to the annual timber cutting quota and related applications formulated by the county, we will conduct on-the-spot investigation in the cutting area, strictly determine the cutting scope and investigate the forest conditions. Strictly put an end to the situation that the logging site can't be reached, and strictly have one permit for each household.

Five, cooperate with other comrades in the bureau to complete the acceptance of returning farmland to forests over the years, and strictly control the money and grain to the county; Do a good job in natural forest protection, ensure the safety of forest resources and maintain the order of forest areas; Actively participate in voluntary tree planting and comprehensive agricultural development projects to ensure the quality of afforestation.

Although I have done a lot of work, I still have some shortcomings. In the future work, I will make persistent efforts, study hard, read more books and ask more questions, use my brains and work hard to contribute to the success of Nanzheng Forestry.

Summary of technical work 4

Under the correct leadership of the group company and through the joint efforts of all staff, our company was successfully put into production in April 20_. After putting into production, safety and technology were emphasized, and safe production was realized in May and June, reaching the designed output. The technical work in the first half of this year is summarized as follows:

First, pay attention to the furnace opening work

Blow-in is the beginning of the first generation life of blast furnace. The quality of blowing-in work has a great influence on the normal production of blast furnace in the future.

Because blast furnace production is a continuous operation, there is an inseparable relationship between each process. In order to ensure the smooth start-up, we must carefully check all relevant links in production and make good preparations. To this end, we will focus on the following aspects:

1, raw fuel preparation

Because the sintering machine can't produce before the furnace is turned on, the raw material conditions are extremely poor. In order to ensure the normal start-up, the raw materials for the start-up are analyzed and prepared in detail. The blast furnace raw materials and sintering raw materials such as coke, ore, limestone, dolomite, quicklime and dolomite powder are analyzed and compared from the aspects of origin, quality, resource status, feeding capacity and quality assurance, and the best one is selected. Combined with the local resources, it is decided to use all-raw ore to start the furnace. Practice has proved that this choice is correct. Although the conditions are difficult, due to our full preparation and reasonable arrangement, the smooth opening and smooth operation of the blast furnace are ensured, and the smooth operation of the blast furnace is maintained in the case of frequent equipment failures.

2, equipment inspection and debugging

The equipment is inspected, accepted and put into trial operation by means of single vehicle, linkage and load linkage.

However, due to time constraints, various problems were not completely exposed during the trial operation. Therefore, for a long time after putting into production, there were many equipment problems, which affected the production process of blast furnace. In this case, we use various operating systems to make reasonable and strict adjustments, so that the blast furnace runs smoothly, without being greatly affected, and has withstood the test of various situations.

3, blast furnace, hot blast stove drying

This blast furnace and hot blast stove were built in winter, and they contain a lot of water. In order to ensure the smooth start-up, a scheme for the hot blast stove of blast furnace was made, which was baked by Tianjin Oven Company. Oven in strict accordance with the oven curve, organize personnel to strictly check the records in three shifts. Therefore, the oven basically meets the predetermined requirements.

4. Strengthen the training of operators.

When I first set foot in the metallurgical industry, the problems of new technology, new personnel and low quality were more prominent. In order to ensure the normal operation of furnace opening and future production, we constantly strengthen employee training and stimulate employees' awareness of learning through assessment. At the same time, some experienced technicians have been hired in important positions to pass, help and bring, and remarkable results have been achieved. After a period of running-in, the operating level and sense of responsibility of post workers have been greatly improved, and now they have basically adapted to the needs of production and completed the transformation from raw to cooked. The next step is to complete the transition from familiarity to cleverness as soon as possible.

Second, establish various technical management systems.

It is a reliable guarantee for normal production to establish various technical management systems with safety technical operation rules as the core. The activities of "learning rules, testing rules and using rules" have been widely carried out in various branches and departments. There are rules to follow in everything, and many detours are avoided, so as to cultivate employees' serious work style.

Third, strengthen staff technical training.

In order to meet the requirements of blast furnace production, a well-trained and skilled workforce must be established. The company, branches and departments have established various training courses, formulated various training plans, studied and rehearsed emergency plans, and deployed long-term plans, creating a good software environment for the company's safe production and stable and high yield.

Summary of technical work 5

I have worked hard since I became a technician of after-sales service in an electrical appliance company, and I have accomplished everything. At present, the work of the past year is summarized as follows:

1, learn the technology of this major well. No matter what job you are engaged in, professional skills will always be the foundation of your foothold. As after-sales technology, although it is not necessarily required that the technology is as high as R&D personnel, the most basic thing should be understood. At least when customers ask questions, you can answer them immediately and help them solve the problems well. At first, I always talked about how the salary was so low, but now I think about it. Even if I earn 10 thousand a month there, what will you exchange it for? Before I came out, I was full of confidence, but after several contacts, I found myself too immature. Sometimes I want to go back and don't want to think about it. I can't go back in frustration, I have to get something. Therefore, I think it is most important to learn technology well. First of all, it is based on development and sustainable development. Only by laying a solid infrastructure can we afford to build tall buildings in summer. But learning the technology of these industrial automation products is not so easy, very boring and involves a wide range. You must also have a desire for technology. Personality is after-sales technology. We should not only know this product, but also know where it is used, what machinery, what system driver and so on. These things can't be learned in a day. If you want to know them roughly, you must experience some unknown darkness, study, work, explore and think. I believe that people in this field must have experienced some unknown darkness to achieve today. So I'm nothing, I'm just a grassroots, and I need to learn again.

2. Learn to communicate with others. Dealing with people in our work is essential, and having good communication potential may make you get twice the result with half the effort. Also, every time you go on a business trip to work on the spot, you should be mentally prepared, because the customer's mood is uncertain. After all, buying our products has caused him necessary losses, and he will spit in your face at any time, so he has strong compressive potential. At this time, I can only pay attention to careful handling. I usually just say, "Don't worry, I will help you solve the problem as soon as possible." Pay attention to what you say when you are away from home. Try to start from the customer's psychology and have a good attitude. You must never contradict others, they are our gods. When communicating with customers, the technical requirements you are engaged in are also very high, and the most frequently asked questions in communication are technical questions; Sometimes I will struggle with some technical problems that I don't understand. If the answer is "hmm, ah, oh", it will be troublesome; It is best not to answer such questions directly, but to start from self-knowledge and try to move to other places, as long as it can help him solve the problem anyway; Otherwise, customers will doubt your people, and at the same time, it will also cause losses to the company's image. The most terrible thing is that he suddenly rushed out and asked you to do it or not. In that case, self-esteem would be greatly affected. Therefore, when communicating with others, either don't say that you should solve the problem quickly at the scene and then leave, or try to understand yourself and talk less nonsense with others.

3. Prepare beforehand and summarize afterwards. When you receive a call from a customer, you should first understand the most specific situation and see if it can be solved by telephone. If you want to go to the site, then analyze what caused the failure, and then understand from the analysis that you should probably prepare components and tools. As the saying goes, "success is for those who are prepared." After completing the task, it is best to make a summary and write down the situation on the spot, such as: what machinery is our machine used in, what parameters are used, input and output voltage and current, etc. Finally, the original fault is analyzed, which is a better way to improve the technology and what the company requires us to do.

There is also that the business trip site is not as perfect as others say, and a person's journey is always so lonely; I also have to endure loneliness, boredom, disassembling machine tools and repairing frequency converters, fearing being dirty, suffering and tired. These are the basic requirements for after-sales technicians. If you can resist, you can resist bravely, but you can't just put it aside; After all, there is a company behind it and so many partners to support it! It is said that after-sales service is a marketing process and the beginning of re-marketing. I think I will try my best to maintain the brand image of the company and strive for the greatest benefit for the company.

Summary of technical work 6

I am a teacher in X Middle School, and I work as a math teacher in senior high school. Over the past few years, I have earnestly performed my duties, paid attention to my own moral cultivation, worked hard, worked hard, been pragmatic and realistic, and achieved certain results, which were well received by teachers and leaders. Over the past few years, I have worked hard, which has made great contributions to the completion of the college entrance examination index in our school and trained a number of qualified high school graduates for our country. My specific approach is:

First, learn from others and enrich your knowledge.

In recent years, I have been engaged in high school mathematics teaching, knowing that my teaching can directly affect students' later life and has great responsibilities, so I keep college textbooks at hand and study and review at any time. Subscribed to many magazines such as Middle School Mathematics Teaching Reference, Middle School Mathematics Teaching and Middle School Mathematics; And often contact with colleagues from other places to conduct teaching research; Every year, I will go to Beijing, Shijiazhuang and Hengshui to participate in teaching and research activities, enrich my knowledge and improve my teaching level.

Second, take a variety of ways to improve student performance

1, cultivate students' interest

As the saying goes, interest is the best teacher. Most students have psychological barriers to learning mathematics and are too lazy to spend time thinking, which leads to some students mastering the basic knowledge well, but they can't get high marks, which discourages their enthusiasm for learning mathematics. Through this situation, students are often given some small questions related to the course content as the opening remarks to introduce the new course; Fully analyze the score ratio and college entrance examination mode of mathematics subjects in college entrance examination to improve students' understanding and interest in mathematics; Humorous language and body language should be used in class to fully link mathematics with real life, show the charm of mathematics knowledge and improve students' interest. It also stimulates students' enthusiasm for learning chemistry by encouraging praise and talking after class.

2. Prepare lessons carefully.

Preparing lessons well is the premise of teaching lessons well. When preparing lessons, according to the actual situation of students in this class, we should adopt corresponding methods and teach students in accordance with their aptitude; Read a lot of reference materials, do related exercises, study authoritative materials such as syllabus and exam instructions, and really understand the knowledge requirements, ability requirements and breakthrough methods of key and difficult points, the problems that students will encounter, and what exercises to equip to consolidate their knowledge.

3. Pay attention to basics and cultivate engineers' professional and technical ability. Summary The research on college entrance examination questions in recent years shows that basic knowledge is the premise and key to improve grades, while students often ignore basic knowledge, and the characteristics of mathematics make students lazy to read and think. Faced with this situation, I patiently dredge, strengthen the efficiency of class for 45 minutes, concentrate on conciseness, strive to master knowledge in class, and equip myself with various exercises to consolidate basic knowledge. The examination and improvement of ability is the foundation of our education now, so in teaching, while paying attention to the foundation, it is 1.

Never forget the cultivation of ability. In classroom teaching, students are asked questions about mathematical concepts and laws of mathematical theorems from different angles, which causes students to think. Encourage students to discuss and express their opinions on confusing and difficult problems in class. Students are usually encouraged to deny answers and put forward innovative ideas. Through hard work, students' ability level has been greatly improved.

Third, actively carry out educational reform.

Now we are implementing new curriculum standards and new curriculum system, which requires our teachers to wear new shoes and take a new path. The new way refers to the new teaching method and teaching mode, so the teaching reform is imperative. Make full use of multimedia courseware in the presentation of teaching content, make boring knowledge concrete, visual and intuitive, and make it easy for students to understand. Instead of cramming, cramming, teachers and students form an interactive and harmonious teaching relationship and form a knowledge body. Teachers' role orientation is no longer the disseminator of traditional knowledge, but the guide and promoter of students' learning knowledge. Teachers should guide students to discover, ask, analyze and solve problems, and teachers and students should interact equally. Adopt various new teaching methods, such as self-study counseling and induced thinking inquiry. Students will turn what they want me to learn into what I want to learn.

Fourth, teach and educate people, and do a good job as a class teacher.

In the work of the head teacher, I have been caring and persistent, diligent in my legs, eyes, mouth and hands, keeping abreast of students' ideological trends, and adopting scientific and effective methods according to students' psychological characteristics to improve all students' ideological consciousness, moral concept, personality quality and team spirit. There is no end to learning and no end to teaching. Although I have done some work in the past and made some achievements, this can only show the past and I will go further in the future.

Summary of technical work 7

The fast pace of 2 1 century requires the advanced development of education. Preschool education, in particular, is an important topic for every teacher. As a newcomer to education, I have learned a lot of working methods and business skills from old teachers and outstanding young teachers in this year's work practice. After taking over as the head teacher, I can give full play to what I have learned and study the preschool education in preschool psychology. And combine theory with teaching practice to make the teaching form novel. Give full play to students' autonomy in teaching, be good at mobilizing students' innovative thinking and have an active classroom atmosphere. Bilingual teaching has been used in educational research for many times and implemented in the classroom.

In my spare time, I actively participate in teaching reform, try new teaching methods for all students, really make teaching and scientific research go deep into the classroom, and gradually form a theory. In the summer of _ _ _, I participated in the "New Curriculum Training Activities" organized by the Municipal Education Research Institute, and achieved excellent results.

In this year's work, I have re-recognized the work of teachers, understood the method of "teaching and educating people", and made it clear that "it is better to teach people to fish than to teach them to fish". Prepare lessons carefully in teaching, actively communicate with students in education, fully understand each student's personality, truly become their big friends, put class construction on the right track, and constantly win the title of "excellent class". After my efforts, the lesson "Interesting Pinyin Country" taught in the "New Young Teachers' Competition" held in our school won unanimous praise from the leaders and was rated as "excellent course".

-Education and teaching is a process of continuous development and progress. I will use my own efforts to create new achievements on the educational front. I love my education, I love my teaching profession, and I will fight for it all my life.

Summary of technical work 8

Time flies, time flies, and it has been a year since graduation. In the course of this year's work, combined with the knowledge about geotechnical engineering learned in the university, I not only deepened my understanding of the original knowledge, but also got a further understanding of the knowledge that was not touched or deeply touched in the previous books. Since my work, I have made great progress and gained a lot in my thoughts, study and work under the careful training and teaching of the unit leaders and through my continuous efforts. The work is summarized as follows:

First, ideologically, I love my country, love my party and make positive progress.

Actively participate in various political studies and training, and strive to improve their ideological consciousness. Ideologically, I am more supportive of the leadership of China's * * * production party and firmly believe in the correctness of taking the road of Socialism with Chinese characteristics. Consciously abide by the relevant laws and regulations of our country, and have good professional ethics and professionalism. Really be down-to-earth in thought and down-to-earth in work.

Second, in learning, keep pace with the times and constantly improve.

It is found in the work that the theoretical knowledge learned in school is different from the actual project management and construction, and it is completely infeasible to step by step. So I humbly ask leaders and colleagues, study hard and study hard. Through their patient advice and unremitting efforts, my professional knowledge, technical level, personal quality and business ability have been greatly improved.

The times are developing and the society is progressing. With the rapid development of the country, the market competition is becoming more and more fierce. This requires me to keep learning and improving. Since joining the work, I have participated in a series of trainings organized by the society and the company, such as project management, general contracting business training, construction site safety management personnel training, building regulations and quality acceptance standards, etc. I have been constantly learning and pondering myself, and really applied these theoretical knowledge and professional skills to practical work.

Third, at work, work hard and do your duty.

Since joining the work in 20xx, I have worked in the company headquarters, xx project department and continued construction project department.

During my stay at the headquarters, as the monitor of the freshman training class, I cooperated with the organization seriously and participated in various trainings arranged by the company. On the one hand, I have exercised my organization and coordination ability, on the other hand, I have learned and understood the actual situation of the company and the post, which is of great benefit to my formal entry into the project management post.

During the period of continuing to build the project department, I always hold a new attitude, work hard, learn from leaders and colleagues with an open mind, and strive to combine the theoretical knowledge learned in the university with the actual situation on the spot, optimize each other, and constantly improve my theoretical knowledge and practical ability. Here, I am mainly responsible for the site construction management of civil engineering. I check the construction situation of subcontractors at the site every day, cooperate with leaders to control the progress and quality, organize all parties to accept concealed works, and contact and coordinate the design to solve the problem that the actual site does not conform to the drawings. Because this project is mainly technical transformation, the sub-items are sporadic, but I don't despise it. I am very serious about the things within my responsibilities, sum up them carefully, and strive to accumulate my own engineering experience in this major.

During my stay in xx Project Department, I walked out of civil construction management and became familiar with the safety management of the construction site. This is a new field that I have not studied and involved before. I received a secondment from the company, and I gladly accepted it. I think safety management is also a very important link for project management, and I really want to have the opportunity to contact and learn this knowledge. During the two-month secondment, on the one hand, I learned the theoretical knowledge of safety management, including various safety laws and regulations, safety norms, on-site management norms, safety management workflow and so on. On the other hand, go to the site every day to check the hidden dangers of safe and civilized construction, and ask the construction subcontractors to make rectification according to the requirements of the specification, and then check the rectification and seal it. , let me have a new understanding of safety management and some experience.

Since I chose the major of civil engineering in the college entrance examination, I have always cherished the dream of building a builder of the motherland. Obviously, I still have many shortcomings, such as imperfect theoretical knowledge and thin on-site practical experience. In the future work, I will definitely work harder, be more diligent, stick to the path I choose and let my dream blossom and bear fruit.