Question 1: How to lay the floor tiles? Video dry paving method: firstly, clean the ground to be paved, sprinkle water and wet it, and brush cement slurry with water cement ratio of 1: 0.4-0.5. With 1: 3 dry cement mortar leveling layer, about 50mm thick, and tamping, and then laying sample lines. After the mortar is stirred, add a proper amount of water to avoid being too wet on the ground. After leveling, spread the floor on it, the thickness is generally 3-5 cm. Then on the back of the ceramic tile to be laid, spread cement slurry with a thickness of about 7mm, spread it on the leveling layer according to the model line, and measure the levelness with a level to ensure the flatness of the ceramic tile. If adhesive (tile glue) is used for paving, please use it in strict accordance with its product instructions.

Question 2: The skill of sticking the floor tile video paving the floor tile, you must first smooth the ground with cement mortar, and the floor tile without cement will be paved on the ground. After the floor tile is leveled, the cement slurry should be spread all over the floor tile, and the diagonal position of the four bricks should be flush. And the order of laying is also particular. Bricks stuck to the ground should be stuck from the inside out. If the ground has a slope or floor drain, pay attention to find the slope according to the drainage direction; The wall brick should be laid from bottom to top, and for the sake of beauty, the bottom brick should be attached afterwards. After the wall tiles are pasted, press the floor tiles. In addition, one wall cannot be glued to the top at a time to prevent the tiles from collapsing due to heavy weight. Don't trample on the floor tiles for a short time after laying. In order to cater to fashionable consumers, some new technological methods have appeared in the market, such as ceramic tile adhesive, colorful caulking agent, seam leaving and paving. Ceramic tile binder (also known as dry bonding method), ceramic tiles do not need to be soaked in water in advance, and the base surface does not need to be wet. As long as the basic conditions of paving are good, the working conditions are greatly improved.

Question 3: Is there a video of teaching floor tiles? Look at the decoration site

Question 4: How to lay the floor tiles? Is there a video? You can watch this video. I don't know where this tool is sold in China, and it is particularly convenient to lay floor tiles.

mp.weixin.qq/...25e#rd

Question 5: How to lay the floor tiles? This is more specific and video. Suggest finding a specific person and spending some money! Simple, quick! I have time to suggest finding a place to earn that money back! I hope it can be considered.

Question 6: Cement mortar should be laid on the floor tiles first, and cement-free floor tiles should be laid on the ground. After leveling, the cement slurry should be covered with floor tiles, and the diagonal positions of the four bricks should be flush. And the order of laying is also particular. Bricks stuck to the ground should be stuck from the inside out. If the ground has a slope or floor drain, pay attention to find the slope according to the drainage direction; The wall brick should be laid from bottom to top, and for the sake of beauty, the bottom brick should be attached afterwards. After the wall tiles are pasted, press the floor tiles. In addition, one wall cannot be glued to the top at a time to prevent the tiles from collapsing due to heavy weight. Don't trample on the floor tiles for a short time after laying. In order to cater to fashionable consumers, some new technological methods have appeared in the market, such as ceramic tile adhesive, colorful caulking agent, seam leaving and paving. Ceramic tile binder (also known as dry bonding method), ceramic tiles do not need to be soaked in water in advance, and the base surface does not need to be wet. As long as the basic conditions of paving are good, the working conditions are greatly improved.

Question 7: How to lay diamond-shaped floor tiles 1. Step 1: Prepare the floor tile drawing. Assign materials to the desired objects.

Step 2: Give the ground object UVW mapping command.

Step 3: Select a plane or a box as the mapping type in the dialog box, and then adjust the mapping level (U direction).

The number of repetitions in the vertical direction (V direction).

Step 4: Open the range box (Gizmo) of UVW, select the yellow box in the top view and rotate it 45 degrees.

You can make two color mosaics in photoshop.

Question 8: Skills of Sticking Stair Floor Tiles Video: To lay floor tiles, you must first smooth the ground with cement mortar, and the floor tiles without cement will be laid on the ground. After knocking them flat, the cement slurry should be spread all over the floor tiles and spread on the ground, and the diagonal positions of the four bricks should be flush. And the order of laying is also particular. Bricks stuck to the ground should be stuck from the inside out. If the ground has a slope or floor drain, pay attention to find the slope according to the drainage direction; The wall brick should be laid from bottom to top, and for the sake of beauty, the bottom brick should be attached afterwards. After the wall tiles are pasted, press the floor tiles. In addition, one wall cannot be glued to the top at a time to prevent the tiles from collapsing due to heavy weight. Don't trample on the floor tiles for a short time after laying. In order to cater to fashionable consumers, some new technological methods have appeared in the market, such as ceramic tile adhesive, colorful caulking agent, seam leaving and paving. Ceramic tile binder (also known as dry bonding method), ceramic tiles do not need to be soaked in water in advance, and the base surface does not need to be wet. As long as the basic conditions of paving are good, the working conditions are greatly improved.

Question 9: How to find a level to detect the flatness of tiles when laying tiles? It can be detected with a vertical measuring ruler, or with a 2M ruler and a wedge feeler. When the latter method is used for detection, the side of the guide rule is close to the measured surface, and the gap is detected with a wedge feeler. Three points should be detected in each place, that is, a vertical point. Each point crosses 45 from left to right in the original position, and the average of the three points is taken. The flatness error of tiles shall not exceed 2, and the height difference between adjacent tiles shall not exceed 0.5.

This "process" can go to the end. When other tests are finished, you can also pour water on the floor with a water container and wait for a while. Where there is water, it will indicate that the floor tiles are uneven or the drainage slope is not enough.

Question 10: video tutorial on floor tile paving method m.ku6 cream is the seasoning needed to make cakes and snacks. There are many ways to make your own cream. Introduce a simple and general method. Ingredients whipped cream (liquid); Agitator; Lemon; Steps/methods 1. Store the bought whipped cream in suitable conditions. The unopened cream can be stored for a long time at low temperature, and it can be stored for about half a month below 10 degree. Uneven cream cannot be thawed and frozen repeatedly during storage. Otherwise, it will affect the quality of the cream. 2. Take out the undistributed cream after thawing completely. The temperature before whipped cream is higher than 10℃ or lower than 7℃, which will affect the stability and whipping size of cream. 3. Pour the cream into the mixing tank, or add some lemons. The capacity is 10%-25% of the mixing tank. 4. Stir by hand or blender. If a blender is used, hit at medium or high speed (160-260 rpm). Cream can be used, and the cream to be used should be stored in the refrigerator. Precautions There are many kinds of cream: whipped cream, also known as whipped cream, is a kind of high-concentration cream that separates fat from fresh milk and is liquid. Cream can also be divided into animal cream and vegetable cream. Animal cream is obtained by separating fat from milk. Vegetable cream is made of vegetable oil such as soybean, water, salt and milk powder. There are many derivatives of cream. Butter: Butter is made of butter. Butter is obtained by further stirring butter with a centrifuge. There is still some water in butter, which is lactose-free, which is rarely found in protein. The lactic acid content of sour cream is about 0.5% by bacterial fermentation. The fat content of cream is 20 ~ 25 times higher than that of milk, while other ingredients such as skimmed milk solids (protein, lactose) and moisture are greatly reduced, so it is a condiment with high vitamin A and vitamin D content. Generally everyone can eat it. Cream is more suitable for people and children who lack vitamin A; Patients with coronary heart disease, hypertension, diabetes and arteriosclerosis should not eat it; Pregnant women and obese people try to eat less or not.