1, Bo Yunji:
Advantages of Boyun opener: Boyun opener is made of advanced technology and has the characteristics of low noise, which belongs to the professional manufacture of complete sets of solid-liquid separation and filtration equipment. The excellent technical index and actual production effect of Boyun cutting machine show that vacuum ceramic filter and vacuum disc filter are rapidly entering the application field of traditional filtering equipment.
2, on the cutting machine:
Advantages of Jianghua reclaimer: Jianghua reclaimer has powerful functions and a wide range of applications, mainly including quartz sand dehydration; Dehydration of fly ash; Desulfurization and denitrification of gypsum; In addition, Jianghua drilling rig has been exported to 36 countries and regions around the world, which has been highly praised by customers.
3. Ding ditcher:
Advantages of Dingliang Kaiji: The products and consulting solutions provided by Dingliang Kaiji have been widely used in oil extraction, biodiesel extraction, chemical liquid removal, Chinese herbal medicine liquid removal, food liquid extraction and other fields. With independent intellectual property rights such as a number of core patents, the product quality is guaranteed and the price is reasonable.
4, starlight cutting machine:
Advantages of starlight reclaimer: starlight reclaimer has a complete and scientific quality management system. The company's integrity, strength and product quality are recognized by the industry. Starlight reclaimer produces van, and its operation modes can be divided into manual, hydraulic and automatic, and can also be divided into electromechanical integration and electromechanical separation.
5. Taixiang cutting machine:
Advantages of Taixiang bottle opener: With excellent product quality and good after-sales service, Taixiang bottle opener makes products sell well all over the country and are exported to Southeast Asia and Africa. The types are relatively complete, and the compaction forms include manual compaction, mechanical compaction, jack compaction, hydraulic compaction, automatic pressure maintaining compaction and advanced program-controlled automatic control.
Extended data:
Matters needing attention in the use of cutting machine:
1. Remove the sundries on the rubber plate of the workbench, and place the knife die in the center of the rubber plate.
2. After the machine is started, loosen the setting handwheel and adjust the "pressure system" to zero.
3. Turn the setting switch to the right in the direction of "knife die setting", and the cutting table 13 begins to slowly descend, approaching the knife die and automatically stops.
4. Push the setting handwheel to the bottom and tighten it. Before starting, set the switch system (left hand) to the "cut" position.
5. Press the brake switch again, and the cutting table will immediately rise to the highest position. At this point, the tool mold has been set.
6. When setting the cutter, be sure to loosen the setting handwheel first, so that the setting lever contacts the tangent point control switch, otherwise the setting action cannot be generated when the cutter setting switch is turned on.
7. When working, the cutter should be placed in the center of the upper platen as far as possible, so as not to cause unilateral wear of the machine and affect its service life. Replace the new cutter. If the height is different, please reset it according to the setting method.
8. When cutting, please keep your hands away from the knife or chopping board. It is forbidden to use hands to help the die cut, so as to avoid danger.
9. When the operator needs to leave his post temporarily, please be sure to turn off the motor switch to avoid damage to the machine caused by improper operation by others. Please avoid overloading to avoid damaging the machine and shortening its service life.