<1> How to define the national professional standards of laboratory technicians is an urgent problem to be solved. thank you

It can be roughly divided into national professional standards such as chemical laboratory technician (laboratory technician), veterinary laboratory technician, feed laboratory technician and aviation fuel laboratory technician. It is basically defined by industry category.

←2 \8592; What certificate does a chemist want to take and how to apply?

Laboratories' qualification certificate for demobilization is relatively easy to test. Laboratories' qualification certificate generally has two sets of papers, namely "Basic Knowledge of Laboratories' Theory" and "Basic Knowledge of Laboratories' Practice", and the test is generally not difficult. The general exam is not difficult. The highest level of compliance with the proposal depends on the individual's educational background and service years. According to the latest national vocational guidance requirements, laboratory staff belong to national special jobs and must hold national vocational qualification certificates. Chemical verification can only be obtained in the vocational training base under the State General Administration of Quality Supervision, which is a valid certificate. Note: Don't take part in the assessment in those places or provinces, otherwise working in other places may not be recognized, because local protectionism in some areas is still quite serious.

(3) How to apply for a chemical inspector certificate?

The laboratory technician qualification certificate needs to be appraised by the local labor qualification appraisal station. If the laboratory technician qualification certificate is issued, the company will generally apply to the local labor and social security bureau for organizing the examination.

Chemical inspector certificate can be registered in the local vocational training center, and the training center will inform you of the specific examination time.

Existing quality inspector certificates: food inspector certificate, fiber inspector certificate, boiler inspector certificate, pressure vessel inspector certificate, pressure pipeline inspector certificate, elevator inspector certificate, tower crane inspector certificate, water quality inspector certificate, large amusement facility inspector certificate, etc.

Generally, there are two sets of papers: basic knowledge of laboratory theory and basic knowledge of laboratory practice.

The general examination is not difficult, and the highest application level depends on the individual's education and length of service. According to the latest national vocational guidance requirements, laboratory staff belong to national special jobs and must hold national vocational qualification certificates. Chemical verification can only be obtained in the vocational training base under the State General Administration of Quality Supervision, which is a valid certificate.

Strictly speaking, only institutions and scientific research institutes have such qualification certificates, that is, at most, they are labeled as laboratory assistant engineers, laboratory engineers and senior laboratory engineers. As long as you stay at work, you can get it more or less when you are old enough. People in society can only test their professional titles or work skills. You can also take the training qualification certificate.

(3) Extended reading of laboratory salary test:

Application conditions for chemical inspector qualification certificate

1. Apply for the primary qualification of chemical inspector: have been engaged in this type of work for more than three years; Or the apprenticeship of this major expires; Or a graduate of a junior vocational school.

2. Apply for intermediate qualification of chemical inspector: after obtaining the primary vocational qualification certificate, work continuously in this profession for more than three years; Or obtain a graduation (completion) certificate through intermediate vocational skills training; Or secondary vocational schools or secondary vocational school graduates.

3. Apply for advanced qualification of chemical inspector: have worked continuously in this profession for more than five years after obtaining the intermediate vocational qualification certificate; Or obtain a graduation (completion) certificate through advanced vocational skills training; Or technical secondary school education, working in this position for five years; Or college degree for more than three years.

The application time is not fixed. Please refer to the notice of the vocational qualification examination office where you apply.

Network quality inspector

Network chemist

What are the responsibilities and work contents of the "boss" chemist? What are the qualifications for taking the exam? I just graduated and got a job as a laboratory technician. Thank you.

Chemists in pharmaceutical enterprises can take two kinds of national professional qualification certificates, drug inspectors and chemical inspectors, and they are also industry employment certificates. No matter what kind of exam you take, your company will first register for you in the local drug supervision department or vocational skill appraisal institution, because individual registration is not accepted.

The certificate of drug inspector shall be registered and trained in the local drug supervision department, and a certificate shall be issued after passing the examination. The chemical inspector certificate shall be registered and trained in the local vocational skill appraisal institution, and a certificate shall be issued after passing the examination.

Application conditions for drug inspectors:

1. Anyone who meets one of the following conditions can apply for a junior position:

(1) Having worked in the same occupation (type of work) for more than two years continuously or accumulated for more than four years;

(2) Graduation from primary training.

2, have one of the following conditions, can apply for intermediate workers:

(1) Those who have obtained the certificate of junior work grade for the declared occupation (type of work) for three years;

(two) to obtain the certificate of the primary level of the occupation (type of work), and to graduate through the training of intermediate workers;

(3) graduated from an institution of higher learning or a secondary specialized school, and engaged in the occupation (type of work) corresponding to the major studied.

3, have one of the following conditions, can apply for senior workers:

(1) It has obtained the intermediate level certificate of declared occupation (type of work) for four years;

(two) to obtain the intermediate level certificate of the declared occupation (type of work) and pass the training of senior workers;

(3) graduated from institutions of higher learning and obtained the intermediate level certificate of declared occupation (type of work).

Requirements for chemical inspectors:

-Main (one of the following conditions)

(1) Reach the standard class hours specified in the formal primary training of this occupation, and obtain the graduation (completion) certificate.

(2) Engaged in this vocational training for more than 2 years.

-Intermediate (one of the following conditions)

(1) After obtaining the primary vocational qualification certificate of this occupation, he has been engaged in this occupation for more than 3 years continuously, and has reached the required standard hours after the formal training of this occupation intermediate, and obtained the graduation (completion) certificate.

(2) Having worked in this occupation for more than 4 years after obtaining the primary vocational qualification certificate of this occupation.

(3) Engaged in this occupation for more than 5 years.

(4) Obtain the vocational (professional) graduation certificate of the secondary vocational school with intermediate skills as the training goal, which is verified by the administrative department of labor security.

-Advanced (one of the following conditions)

(1) After obtaining the intermediate vocational qualification certificate of this occupation, he has been engaged in this occupation for more than 3 years continuously, and has obtained the graduation (completion) certificate after reaching the required standard hours through the advanced formal training of this occupation.

(two) after obtaining the intermediate vocational qualification certificate, he has been engaged in this occupation for more than 5 years.

(3) Obtaining the vocational (professional) graduation certificate of the higher vocational school with the training goal of advanced skills, which is recognized by the administrative department of labor security.

(4) College graduates who have obtained intermediate vocational qualification certificates have been engaged in this major for more than 2 years.

-Technician (one of the following conditions)

(1) After obtaining the senior professional qualification certificate of this major, he has been engaged in this major for more than 5 years continuously, and has been trained by this professional technician to reach the required standard hours, and has obtained the graduation (completion) certificate.

(2) Having been engaged in this occupation for more than 6 years continuously after obtaining the senior vocational qualification certificate of this occupation.

(3) Graduates of this major (major) from senior technical schools who have obtained the vocational senior vocational qualification certificate have been engaged in this occupation for more than two years.

(4) University graduates who have obtained the vocational senior vocational qualification certificate and engaged in the professional work 1 year or more.

-Senior technician (meeting one of the following conditions)

(1) After obtaining the professional qualification certificate of the professional technician, he has been engaged in the professional work for more than 3 years continuously, and has been trained by the professional senior technician to reach the required standard hours, and has obtained the graduation (completion) certificate.

(2) After obtaining the professional qualification certificate of this professional technician, he has been engaged in this professional work for more than 5 years.

What are the duties and work contents of the laboratory technician? What are the qualifications for taking the exam?

Chemists are graded and have a unified national examination. You can check it. The following are the responsibilities of laboratory technicians in two units for reference only. Job responsibilities of laboratory technicians. Strictly and meticulously do a good job in water quality testing, effectively control the quality, and ensure that the water quality of ex-factory products is 100% qualified. Two, every day in the finished product packaging workshop or barrel workshop sampling inspection. During operation, the straw is cleaned with sterile water first, and then put into the pressure cooker for disinfection to ensure that the whole test process is completed in a sterile state. Three, found that the test results exceed the standard or there are signs of exceeding the standard (less than three Escherichia coli per 100 ml, and the number of bacteria per ml is less than 100), to directly sample the water treatment for further testing, and analyze the reasons. Four, after the test results come out, we should carefully fill in the test sheet, so that the figures are accurate and the information is complete, and send it to the leader in charge of production for signature. Five, the laboratory instruments should be cleaned in time after use, and the laboratory room should always be kept in a good sanitary condition, so that the windows are clean and spotless. Six, in addition to the water quality test work, according to the needs and leadership arrangements, complete the finished product packaging and other tasks. The duty of a chemist. When collecting specimens, strictly implement the check system. If the specimen does not meet the requirements, it should be collected again. General inspection should be reported before work on the same day, and emergency inspection specimens should be reported at any time. Second, we should carefully check the inspection results, fill in the inspection report, register, sign and issue a report. When the inspection results are inconsistent or suspicious, we should take the initiative to contact the prison bed for re-inspection. 3. Stay for 24 hours after the release of special standards. In general, standard vehicles and appliances should be disinfected immediately, and contaminated appliances should be autoclaved before cleaning. Suspected pathogenic microorganisms should be burned at designated places to prevent cross-infection. Four, to ensure inspection and treatment, regularly check the sensitivity of reagents and proofreading instruments. Five, actively cooperate with medical and scientific research, to carry out new inspection projects. Six, strains, viruses, highly toxic reagents, flammable, explosive, strong acid, strong alkali and valuable instruments should be properly kept by designated personnel and regularly checked.

What certificate does the chemist want to take and how to apply?

Experimental technicians should obtain the national professional qualification certificate of experimental technicians. Laboratory technicians must hold the national professional qualification certificate of laboratory technicians before taking up their posts. According to the requirements of the national vocational guidance, laboratory technicians belong to the national special type of work and must hold the national vocational qualification certificate before taking up their posts. Chemical verification can only be registered in Ministry of Human Resources and Social Security, which is a valid certificate. To apply for the exam, you need to sign up for laboratory technician training schools around the country, and then the school will hold laboratory technician qualification examinations regularly, and you can get the certificate after passing.

What is the use of "Qi" chemical inspection certificate for future work?

The chemical inspection certificate is useful for future work.

According to the spirit of "People's Republic of China (PRC) Labor Law" and "Provisions of the Ministry of Labor and Social Security on Recruiting Skilled Workers" (Ministry Order No.6), the national vocational qualification certificate system will be further implemented to meet the national requirement that chemical inspectors must hold certificates.

As a qualification certificate, it is required by some employers when recruiting, and it is used when these units are audited by state units, because the employees of inspection and calibration laboratories are required to hold certificates. For a more formal unit, if you don't have the corresponding certificate, people won't use you. Under the same conditions, candidates with certificates are much more likely to be hired, so it is best to obtain evidence.

：

Occupation grade:

There are five levels of this profession, namely: primary (national vocational qualification level 5), intermediate (national vocational qualification level 4), advanced (national vocational qualification level 3), technician (national vocational qualification level 2) and senior technician (national vocational qualification level 1).

How to test the national professional qualification certificate of food inspector

Apply for qualification

One, have one of the following conditions, can apply for junior workers:

(1) Having worked in the same occupation (type of work) for more than two years continuously or accumulated for more than four years;

(2) Graduation from primary training.

Two, have one of the following conditions, can apply for intermediate workers:

(1) It has been three years since he obtained the certificate of junior work grade for the declared occupation (type of work);

(2) Obtain the primary level certificate of declared occupation (type of work) and complete the training for intermediate workers;

(3) graduated from institutions of higher learning and secondary specialized schools and engaged in occupations (posts) corresponding to their majors.

(8) Extended reading of laboratory salary test:

A, professional requirements:

1, professional knowledge requirements

(1) Basic knowledge of standardized measurement quality

(2) Basic knowledge of chemistry (including safety and health knowledge)

(3) Analytical chemistry knowledge

(4) Basic knowledge of electrician

(5) Computer operation knowledge

(6) Knowledge of relevant laws and regulations

2. Elements of professional competence

Have certain observation, judgment and calculation ability, strong color discrimination ability and ability to deal with emergencies.

3, job requirements

The technical requirements of this standard for primary, intermediate, advanced, technician and senior technician are progressive in turn, and advanced includes low-level requirements.

4. Basic education level

Graduated from high school or technical secondary school (or equivalent).

Second, related knowledge

1. Use knowledge of pycnometer

2. Capacity method knowledge

3. Basic knowledge of microorganisms

4. The use of visible light spectrophotometer knowledge

The analysis of test results and the compilation of test reports can correctly calculate and deal with the errors of test data, and master general knowledge and common methods of data processing.

Can the "Nine-Year" Laboratory Technician take the National Professional Title Examination?

Yes, you can.

There are five levels of national professional standards for chemical inspectors, namely: primary (national professional qualification level 5), intermediate (national professional qualification level 4), advanced (national professional qualification level 3), technician (national professional qualification level 2) and senior technician (national professional qualification level 1).

Full-time vocational school education is determined according to its training objectives and teaching plan. Promotion and training period: no less than 180 standard hours for junior, intermediate and advanced students; Technicians and senior technicians shall not be less than 150 standard hours.

(9) Extended reading of laboratory salary test:

National professional standards for chemical inspectors require:

1, divided into theoretical knowledge test and skill operation test. The theoretical knowledge test adopts the closed-book written test method, and the skill operation test adopts the on-site practical operation method.

2. Both the theoretical knowledge test and the skill operation test adopt the percentile system, and those who score above 60 are qualified. The appraisal of technicians and senior technicians must be comprehensively reviewed.

3. The theoretical knowledge test is conducted in the standard classroom; Skills operation examination should be conducted in the laboratory, and equipped with necessary test instruments and equipment. The environmental conditions, instruments and equipment, reagents, reference materials, tools and samples for laboratory testing can meet the requirements of the appraisal project, and all kinds of measuring instruments must pass the metrological verification and be within the validity period of verification.

What certificate should the chemist take and how to apply?

Experimental technicians should obtain the national professional qualification certificate of experimental technicians. Chemists must hold the professional qualification certificate of national chemist before they can take up their posts. According to the requirements of national vocational guidance, inspectors belong to national special jobs and must hold national vocational qualification certificates. Chemical verification can only be registered in Ministry of Human Resources and Social Security and is a valid certificate.

To apply for the exam, you need to sign up for laboratory technician training schools around the country, and then the school will hold laboratory technician qualification examinations regularly, and you can get the certificate after passing.

Chemist, a person who conducts chemical experiments to determine whether one or more components exist in a substance (such as minerals, alloys, drugs, antibiotics or food) or to determine the content of these components.

(10) Overview of the knowledge and ability that laboratory technicians need to have in the extended reading test of laboratory payroll.

1, master the basic theory and knowledge of physical chemistry, medicinal chemistry, medicinal polymer materials, industrial pharmacy, preparation equipment and workshop process design;

2, master preparation research, dosage form design and improvement, as well as pharmaceutical preparation production process design and other technologies;

3. Have the preliminary ability of research and development of pharmaceutical preparations, design and improvement of dosage forms and design of production process of pharmaceutical preparations;

4, familiar with the regulations and policies of pharmaceutical affairs management;

5. Understand the development trend of modern pharmaceutical preparations;

6, master the basic methods of literature retrieval and information query, with preliminary scientific research and practical work ability.