There is no requirement on the temperature of the construction workshop for automobile crystal plating, but it must be constructed by a professionally trained crystal plating technician, which has high requirements on the environment and requires working in a dust-free environment.

Electroplating maintenance process: 1. Check the condition of the vehicle, and conduct a comprehensive and detailed inspection of the vehicle to see if there are scratches and paint removal.

2. Clean the car body, wash the car from front to back and from top to bottom, and carefully wipe the car body with a soft towel.

3. Clay treatment: After repeatedly rubbing the clay, put it in the palm of your hand and move it back and forth horizontally with clear water.

4, rubber edge protection, with 12 mm, 18 mm, 24 mm tape to protect different parts of the car body.

5, polishing treatment, according to the actual situation of the paint surface, choose the appropriate abrasive for polishing.

6. Clean up the dust on the paint surface, wash the whole car carefully with clear water, and then dry the paint surface with absorbent towel and efficient dry cleaning gun.

7, degreasing cleaning, degreasing the paint surface with special degreasing water.

8, wipe paint curing agent, paint curing agent should be careful.

9. Vehicle quality inspection, cleaning and nursing of paint surface, side seams, doors, engine room, car glass and tires.