1, and urge the contractor to set up a leading group for site civilized construction. Put civilized construction site management on the agenda of project management.

2, the construction site set up obvious signs. Indicate the name of the project, the names of the owner, supervision unit, design unit, contractor and construction project manager, the commencement and completion dates, the approval number of the construction permit, etc. The contractor is responsible for protecting the signs on the construction site.

3. The main management personnel of the construction site shall wear identification cards that can prove their identity at the construction site. Slogans, safety color codes or posters should be hung at the entrance of the construction site and dangerous operation parts to remind employees to pay attention to safety production at any time.

4. Check whether there are targeted civilized construction guarantee measures in the construction scheme, whether it can abide by the relevant safety production systems of the state and local governments, strengthen the plane management of the construction site, and establish a good production order of safe production and civilized construction.

5, civilized construction education, labor insurance dress, show certificates. Abide by various safety production management systems.

6. All employees participating in the construction must undergo entrance safety education, post safety operation technology education and civilized construction education. Resolutely stop illegal command and illegal operation.

7, the responsibility of civilized construction to the people. It is suggested that the project production manager should focus on civilized construction. The builder is responsible for the specific civilized construction management, and earnestly implements the safety and civilized construction guarantee measures in the construction organization design when organizing production. And there is a reward and punishment system.

8, in the weekly supervision meeting, civilized construction should be discussed as a special project.

9, for all kinds of problems, once found, must take measures to correct, to avoid recurrence. No matter which level, department or person is involved, it will never be tolerated and must be rectified and implemented. And according to the seriousness of the case, according to the relevant provisions of punishment; Outstanding achievements shall be rewarded in accordance with the reward and punishment measures.

10, strengthen the general layout management of construction. In the construction organization design or construction design scheme, there must be an accurate construction layout and report it to the supervision unit for approval. When the general layout of construction needs to be changed due to the project, an application should be made to the supervision company and the owner first, and it can be implemented only after approval.

1 1. Strengthen the stacking management of materials, semi-finished products and machines. Stack bulk materials, semi-finished products and machines and equipment according to the general layout of construction, and do not occupy the roads and safety protection facilities in the field.

Ministry of materials and equipment should ensure the timely supply of materials and process equipment required for safety technical measures, and ensure that the purchased labor protection articles and appliances such as safety nets, safety helmets and safety belts meet safety technology and quality standards. Materials should be carefully managed, strictly used quantitatively, and bulk materials should be recycled in time. Materials should be stacked neatly, with the bottom cushion and the top cover.

12, strengthen the management of construction machinery. Construction machinery shall be set according to the position and line specified in the general layout of construction, and the roads in the field shall not be occupied at will.

Construction machinery can only be used after safety inspection. Construction machinery operators must establish a unit responsibility system, and hold relevant certificates according to relevant regulations, and it is strictly forbidden to operate without a license. Construction machinery should be placed neatly, the fuselage should be kept tidy, the mark number should be clear, the safety device should be sensitive and effective, the inside and outside of the shed should be clean, and the operation should be convenient. The mixing station should be listed for mixing and cleaned at the end of the day.

The equipment management department should always check, repair and maintain the mechanical and electrical equipment, so that the equipment is in a good technical state, and it is strictly forbidden for the mechanical and electrical facilities to run in spite of illness. Ensure that the safety protection device is complete, sensitive, effective and reliable. Mechanical operators should be trained and certified.

Extended data:

Construction inspection method:

Including routine inspection, special inspection and joint inspection.

1. Routine inspection: refers to the daily inspection organized by the project manager or the regular spot check organized by the construction enterprise. The supervision engineer shall participate in such self-inspection activities, review and sign the activity records, and urge the rectification.

2. Special inspection: According to the civilized construction management documents issued by the Municipal Construction Committee, such as digging and transporting mud and dregs, sanitation and epidemic prevention, etc. Management information, publicity and education inspection, as well as special inspection or inspection of key projects and parts carried out according to relevant documents of superiors.

3. Joint inspection: refers to the inspection conducted by the supervision team in three stages in the construction process according to the Standard for Safety Inspection of Building Construction (i.e. the foundation, main structure and the first three stages before the project is completed). The scoring results shall be signed by the project manager or the person-in-charge of the construction enterprise and the person-in-charge of the supervision company as the main basis for evaluating the construction safety level after the completion of the project.

References:

Baidu encyclopedia-construction