It depends on what computer car you adjust. There are two buttons and three buttons. Press the key first, the steps of Zuqi pattern machine printing: Step 1: Press "Input Selection" and start the machine at the same time until English subtitles appear on the screen, and let go; Step 2: Press the "Empty Feed" key, then use the up, down, left and right arrow keys to move the needle to the starting point, and press the "Execution End" key; Step 3: Press the "General Sewing" key, "P=?" Will appear at this time. (p is the needle distance) Press the number keys to set the needle distance; Step 4: Press the "Up, Down, Left and Right" direction keys, and press the "End of Realization" key according to your given pattern (a straight line has two endpoints, and the more endpoints of a curve, the more accurate it is) until the pattern is completed; Step 5: After pressing "Cut Line", if the pattern is saved, press "Write" and "No =?" Will appear. (refers to the pattern number), you can select a number to set the pattern number, and then press the "Execution End" key to complete the pattern making. 1. Start from the standard screen. 2. Press the menu key, and then press the mode key. 3. The manual screen of data setting will be displayed. Just press b with a black bar (b: general data). 1-9 The number keys on the right are used to adjust the needle distance. Just enter the required stitch distance. 4, H: high-speed MID 1: medium-high speed MID2: medium-low speed l low speed can be selected according to your own needs. 6. After the above input is completed, the manpower screen ps: sewing data of the manpower needed sample diagram will be displayed. 7. At the beginning of this screen, the function is paper feeding (blank paper feeding). 8. You can select the starting point of the pattern to be printed by moving the key to the right. (If PS needs to print a curved version, you need to select a curved version. After the moving position reaches the destination, please press Enter to decide (indicating that the straight seam data between point A and point B has been completed). 9. Then you can press the menu button, and then press RET END to return to the original point. (The external presser foot will automatically return to its original position, so please pay attention to the stop position of the needle. The difference between Zuqi and Mitsubishi is that Zuqi's version is button-pressed, and you can't see the printed version. Mitsubishi's version is LCD, and you can see the printed stitches. Relatively speaking, Mitsubishi's version is more convenient, but the price is relatively high.