Brief introduction of business management major in self-study examination
Professional code: 020202
I. Examination Courses and Credits
Serial number category course code course name credits
Outline of Modern History of China II
23709 Introduction to Basic Principles of Marxism 4
English 14
44 183 probability and mathematical statistics 4
6005 1 Computer Application in Management System 4
Management principle
Theory and Practice of International Trade
90067 financial management
100 150 financial theory and practice 6
110151business strategy 6
120 152 organizational behavior 4
Quality management 4
140 154 enterprise management consulting 4
You must do the graduation thesis of 6999, and there is no credit.
Total credits 75
Second, practical links and requirements
1. Computer applications in the management system include on-board examinations.
2. Write graduation thesis and reply.
1. If the graduates of the self-taught college of this major have passed the quality management examination of the college section, they must change to China tax system 0 146 in the enzyme section.
2. Candidates can apply for English courses that are exempt from examination, but they must take "99 10 Financial Application Writing" and "99 1 1".
Theory and Practice of Entrepreneurship.
3. Candidates can apply for exemption from the course of Probability Theory and Mathematical Statistics, but they must change to the course of 306 1 Service Marketing.
4. Candidates can apply for exemption from the course of Linear Algebra, but they must take the course of 5963 Performance Management.
Fourth, study bibliography.
1. Outline of China's Modern History
Outline of Modern History of China, Wang Shunsheng, Li Jie, Higher Education Press, 2008.
2. Introduction to the basic principles of Marxism
Introduction to the Basic Principles of Marxism, Wei Xinghua, Zhao Jiaxiang, Peking University Publishing House, 2008.
3. English
College English Self-study Course, edited by Gao Yuan, Higher Education Press.
4. Probability theory and mathematical statistics
Probability Theory and Mathematical Statistics, edited by Liu and Wang, Wuhan University Press.
5. The application of computer in management system
Application of Computer in Management System, edited by Wang Xingming, Wuhan University Press.
6. Principles of management science
Principles of Management, edited by Li Xiaoguang, China Financial and Economic Publishing House.
7. International trade theory and practice
Theory and Practice of International Trade, edited by Leng Baijun, China Financial and Economic Press.
8. Financial management
Financial Management, edited by Wang Qingcheng and Li Xiangguo, China Financial and Economic Publishing House.
9. Financial theory and practice
Financial theory and practice, edited by Zhou Sheng, China Financial and Economic Publishing House.
10. Business strategy
Enterprise Strategy, edited by Liu, Wuhan University Press.
1 1. Organizational behavior
Organizational Behavior, edited by Sun Tong, Higher Education Press.
12. Quality management
Quality Management, edited by Jiao Shubin and Chen, Wuhan University Press.
13. Enterprise management consulting
Business Management Consulting, edited by Liu, Wuhan University Press.
14. Financial Application Writing
Financial application writing, edited by Fu Jiabai, Jiangxi People's Publishing House.
15. Entrepreneurship theory and practice
Theory and Practice of Entrepreneurship, edited by Chi Yingqing, Jiangxi People's Publishing House.
16. Linear Algebra
Linear Algebra, edited by Xu, Wuhan University Press.
17 service marketing
Service Marketing Course, edited by Li Huaibin, Dongbei University of Finance and Economics Press.
18. Performance management
Performance Management, edited by Gu Xuan, Shanghai Xiaotong University Press.
Self-study quality management 00 153, management principle 00054, introduction to enterprise management strategy 00 15 1, organizational behavior 00 152. Quality Management of National Self-taught Examination July 20 13
20 13 July National Higher Education Self-taught Examination
Quality management testing problem
Course code: 00 153
Candidates are required to scribble the answers to all questions on the answer sheet with pens as required.
Multiple choice problem section
Precautions:
1. Before answering the questions, candidates must fill in their examination course name, name and admission ticket number in the position specified in the answer sheet with a black pen or signature pen.
2. After selecting the answer to each question, black the answer label of the corresponding question on the answer sheet with 2B pencil. If you need to change it, clean it with an eraser, and then choose to apply other answer labels. I can't answer on the test paper.
I. Multiple choice questions
Of the four options listed in each question, only one meets the requirements of the topic. Please select and black the code corresponding to "Answer Sheet". Wrong coating, too much coating or no coating do not score.
1. The following expenses are preventive expenses.
A. Incoming material test fee B. Process control fee
C. Test equipment evaluation fee D. Re-inspection and screening fee
2. The final evaluation standard of product quality is
A. Product quality supervision department B. Company leaders
C. product designer D. customer
3. Scholars who pioneered the field of statistical quality control are
A. shewhart B. Zhu Lan
C. Deming Simon
4. The logical starting point of business operation is
A. identify and segment customers B. register with the industrial and commercial department.
C. Product development D. Product sales
5. Through complete customer relationship management, the ultimate goal of the development of the relationship between the organization and customers is to make customers become.
A. repeat buyers B. loyal customers
C. Active customers D. Partners
6. Reflect the most important and eternal creed of an organization is
A. Mission B. Vision
C. Core values D. Social responsibility
7. According to Herzberg's two-factor theory, health factors are
A. Promotion B. Responsibility
C. Salary D. Appreciation
8. The core processes of the organization include design processes and
A. Production and supply process B. Support process
C. Supply and cooperation process D. After-sales service process
9. The review after the new product prototype is made belongs to the design review.
A. Preliminary review B. Mid-term review
C. Final review D. Review of sales readiness
10. A sampling inspection scheme usually includes three parameters, besides batch number n and sample size n, there are also
A. the number of unqualified products is db. Qualified judgment number a.
C. Process capability index Cp or CpkD .. Receiving probability of product batch L (P)
1 1. According to the classification of products by the International Organization for Standardization, products produced by law firms and consulting institutions can generally be regarded as
A. Services B. Software
C. Hardware D. Process materials
12. In the Heikman-oldham work design model, the work characteristics that determine the results of work activities are
A.b. Mission integrity
C. Autonomy D. Work feedback
13. The experts who put forward 14 quality improvement steps are
A. crosby Taylor
C. feigenbaum Maslow
14. The most important measures to overcome the resistance of habit and inertia are
A. Coordination B. Incentives
C. Communication D. Control
15. The reliability of data and information refers to
A. the authenticity of data and information shall be guaranteed. B the required data and information shall be comprehensive and complete.
C. ensure that data and information are not damaged. Ensure that there is no danger during data and information processing.
16. Compared with the traditional purchasing point of view, the key points of modern strategic purchasing decision are
A. Partnership B. Total cost of ownership
C. Price D. Conforming to specifications
17. The only quantitative analysis method among the seven new tools is
A.KJ method B. matrix diagram
C. Matrix data analysis D. Process decision-making program diagram
18. The chart used to "show the relationship between the fluctuation of quality characteristics and its potential causes" is
A. Flowchart B. pareto chart
C. Figure D. Ishikawa Figure
19. baking machine test of semiconductor products, which exposes products to high temperature and forces defects to occur, belongs to this kind of reliability test.
A. Reliability determination test B. Reliability appraisal test
C. Reliability acceptance test D. Environmental stress screening test
20. The purpose of standardization is to
A. Simplify B. Ensure product quality
C. Get the best order D. Reduce the cost
2 1. Daily operation performance information, such as output, production cycle, productivity, etc., belongs to performance measurement indicators.
A. Implementation level B. Process level
C. Organizational level D. Planning level
22. In supplier relationship management, the contents of the joint quality plan under management are as follows
A. Conduct value analysis
C. Inspection and testing D. Establish a clear responsibility system
23. The distribution of the most commonly used random variables in quality management is
A. Uniform distribution B. Normal distribution
C. binomial distribution
24. At the beginning of the product life, failures caused by manufacturing defects or raw material defects are called
A. Functional failure B. Reliability failure
C. Unexpected failure D. Lossy failure
25. Voluntary certification applies to
A. products related to the national economy and people's livelihood B. products related to personal safety
C. Products of great economic value D. General products
Second, multiple choice questions
At least two of the five options listed in each question meet the requirements of the topic. Please select them and black out the corresponding codes on the Answer Sheet. Wrong painting, too many paintings, less paintings or no paintings, all have no scores.
26. The excellent performance model of the European Quality Award is based on the following basic values
A. Result-oriented B. Customer-centered
C.d. public responsibility
E. People development and participation
27. Everyone in an organization plays multiple roles, including
A. Suppliers B. Processors
C. Customer D. Leadership
E. decision makers
28. The role of elevation analysis is mainly manifested in
A. Setting goals B. Customer satisfaction
C. Improving performance D. Promoting organizational change
E. Increase market share
29. In the following indicators to measure organizational performance, indicators to measure organizational effectiveness are
A. Operating profit B. Production flexibility
C. Quality of products and services D. Cycle time
E. Time to market
30. The characteristics of an efficient team mainly include
A. Clear objectives B. Negotiation skills
C. Consistent commitment D. Good communication
E. Appropriate leadership
Non-multiple choice part
Precautions:
Write the answers on the answer sheet with a black pen or signature pen, not on the test paper.
Third, the noun explanation questions
3 1. Internal customers
32. Organizational social responsibility
33.group
34. Troubleshooting
Fourth, short answer questions
35. Briefly describe the quality improvement procedures of Zhu Lan Company.
36. Briefly describe the process of quality function development.
37. Briefly describe the significance of standardization.
38. How to evaluate suppliers?
39. Briefly describe the basic steps of applying process method to manage important processes.
Verb (abbreviation of verb) On the Problems of Literature
40. Try to describe the influence of quality on economy and study the promotion of quality cost to quality improvement.
VI. Calculation Problems
4 1. In order to analyze whether the process is in a stable state, five samples are taken from the process every hour, and 30 groups of samples have been taken, and the mean and range Ri of each group are found, and =458.4 and = 127.6. When n=5, A2=0.577.
Requirements: (1) Calculate the upper and lower limit control values and central values of the control chart.
(2) If the control chart is drawn and dotted, it is found that there are 1 points on the upper control boundary, and all other points are within the boundary, which is the same.
Always arrange, try to judge whether the process is stable and explain the reasons.
42. A QC team investigated the appearance quality of plastic products produced by an injection molding machine from February 5 to February 10, and obtained the following data. Please use Pareto Diagram to analyze and point out the main quality problems.
Defects, hole formation, defects, deformation, others
Quantity 59 13 14 196
Quality Management of Self-taught Examination (1) 20 12 National April.
Quality Management of Self-taught Examination (1) 20 12 National April.
Course code: 00 153
First, multiple-choice questions (25 small questions in this big question, 65438+ 0 points for each small question, 25 points * * *)
Of the four options listed in each question, only one meets the requirements of the topic. Please fill in the code in brackets after the title. Wrong selection, multiple selection or no selection will not be scored.
1. The main features of the quality inspection stage are
A. Prevention beforehand B. Inspection afterwards
C. There are various means to solve quality problems. D. "Three aspects", namely, the whole process, all staff and comprehensive quality.
2. The first country or region to implement the "excellent performance model" is?
A. Europe B. America
C. Japanese D. China
3. The performance of customer loyalty is
A. What does the customer do B. What does the customer say
C. Customers expect more satisfactory supplier selection D. Mainly measure the satisfaction of existing customers.
4. Customers within the enterprise are
A. The sales department of the enterprise B. The supplier of the enterprise
C. Agent of the enterprise D. Original equipment manufacturer of the enterprise
5. Said the organization is expected to reach a state in the future is
A.b. Purpose of the organization
C. Organizational core values D. Organizational vision
6. The objective evaluation method of performance appraisal is generally only applicable to
A. Top managers B. Middle managers
C. Grass-roots managers D. Front-line employees engaged in manual labor
7. The representative figures who put forward the view that "the quality of products and services is mainly determined by their activity process or system" are
A. Peter Sanjay Deming
C. Ishikawa Kaoru
8. In the performance measurement indicators, indicators such as product and service quality, main production time and time to market belong to
A. Financial and market indicators B. Organizational effectiveness indicators
C. Customer-centric indicators D. Supplier and partner indicators
9. "Identifying, understanding and implementing strategies to meet customer needs" belongs to supplier relationship management.
A. Activities in the planning phase B. Activities in the organizational phase
C. Activities in the control phase D. Activities in the improvement phase
10. According to the loss function of Japanese quality management expert Dr. Tian Ye, high reliability can produce lower.
A. Product purchase cost B. Product use cost
C. Customer complaints D. Social costs
1 1. The purpose is to show the relationship between the fault and the cause, similar to the fishbone diagram used for causal analysis. This reliability analysis method is as follows
A. Failure Mode and Impact Analysis (FMEA) B. Fault Tree Analysis (FTA)
C. Redundancy technology analysis D. Matrix data analysis method
12. The purpose of standardization is
A. Get the best order B. Eliminate technical barriers to trade
C. Protecting consumers' interests D. Promoting technical cooperation
13. The spiritual essence of various modes that constitute modern quality management is
A. Total Quality Management B. Excellent Performance Model
C.O 9000 family standard D. Eight principles of quality control.
14. The highest level of elevation analysis activities is
A. Different departments within the enterprise B. Direct competitors
C.d. global leader
15. The key to customer satisfaction is
A.b. Quality of products and services
C. Employee satisfaction D. Continuous improvement of process
16. Six Sigma management, as a method to continuously improve the quality of products and services, originated from.
A.IBM company B. Kodak company
C. General Electric Company Motorola Company
17. The classical economic model of conformity quality holds that
A. the higher the quality, the higher the quality cost. B. The higher the quality, the lower the quality cost.
C quality has nothing to do with quality cost d, and the optimal qualified quality is 100%.
18. An organization with good information management can easily access or obtain its data and information. This shows that data and information have been
A.b. availability
C. Integrity D. Accuracy
19. According to the physical meaning of the function and the knowledge of calculus, the relationship between the cumulative failure distribution function F(t) and the reliability function R(t) should be
A.F(t)=R(t)B.F(t)-R(t)= 1
C.R(t)-F(t)= 1D。 F(t)+R(t)= 1
20. In the PDCA cycle, the core contents and necessary links of the disposal (stage A) stage are as follows.
A. Find out the problem B. Analyze the reason
C. Standardization D. Evaluation results
2 1. The service attitude of the clerk and the taste of the restaurant dishes belong to
A. Attractive characteristics B. Necessary characteristics
C. Linear characteristics D. Nonlinear characteristics
22. When the perceived quality of customers is consistent with customer expectations, customers will feel that
A. Very satisfied B. Satisfied or dissatisfied
C. it doesn't matter whether you are satisfied or not. D. dissatisfied
23. In enterprise employee training, training is more formal and theoretical knowledge learning is more important. The training method belonging to "charging" learning is as follows
A. on-the-job training
C. Amateur study D. Job rotation
24. The technical information system, human resources and administrative services of the Organization belong to
A. Design process B. Production and supply process
C. Support process D. Supply and cooperation process
25. In traditional procurement, the most important criteria for evaluating supplier performance are
A. Total cost of purchased materials B. Quality
C. Availability and low price D. Delivery time
Second, multiple-choice questions (this big topic ***5 small questions, each small question 2 points, *** 10 points)
At least two of the five options listed in each question meet the requirements of the topic. Please fill in the code in the brackets after the title. Wrong selection, multiple selection, less selection or no selection do not score.
26. The basic requirements that the strategic objectives formulated by the organization must meet include
A. the goal must be clear. Goals must be measurable.
C. Have a clear completion person D. Have a clear completion time.
E. there is a clear completion place.
27. The characteristics of an efficient team include
A. Related skills B. Mutual trust
C. Negotiation skills D. Quality assurance
E. Appropriate leadership
28. The key performance indicators of the organization mainly include
A.b. Regulatory environment
C. Competencies and core competencies D. Current business direction
E. organizational culture
29. Zhu Lan believes that the key activities to effectively reveal customer needs include
A. plan and collect customer requirements and processes
B. collect customer needs expressed in customer language.
C. analyze customer needs and prioritize them.
D. Translate customers' needs into "our" language.
E. establish measurement indicators and measurement methods.
30. The reliability of products includes the following basic elements
A. Ability or effectiveness B. Specific time
C. Specific operating conditions D. Possibility or probability
E. Qualified product rate
Third, the noun explanation question (this big question ***4 small questions, 3 points for each small question, *** 12 points)
3 1. Customer demand
32.motivation
33. Hierarchical approach
34. Sampling inspection
Four, short answer questions (this big topic ***5 small questions, each small question 5 points, ***25 points)
35. Briefly describe the main forms and contents of quality supervision of China government.
36. Generally speaking, what kinds of quality characteristics can be divided into?
37. Briefly describe the core values embodied in Malcolm Baldrige National Quality Award. (Please list five or more)
38. What is quality improvement? What is the significance of quality improvement?
39. What are the stages of design review?
Verb (abbreviation of verb) essay question (this big question * * 1 small question, 10 score)
40. Please describe the main steps involved in the supplier relationship control process.
Six, the calculation problem (this big problem ***2 small questions, each small question 9 points, *** 18 points)
4 1. This kind of pumping unit is produced by an ordinary machine tool factory. The aperture specification of the gearbox of this machine is mm, and now we randomly select 100 pieces to measure =240.0 1452mm, S = 0.00454 mm ... to calculate the process capability index, make a judgment and point out the measures to be taken.
42. In order to understand the fluctuation of the outside diameter quality of the bolt rod in a workshop, the histogram is used for analysis. At present, 100 pieces are taken from a batch of products, and the maximum outer diameter x of the bolt rod is measured.
= 7.938 mm, x
= 7.913mm. If the data of 100 is divided into
10 group, try to determine the interval h of histogram, the lower limit value of the first group and the upper limit value of the first group.
Thank you, but is there no answer?
65438+July 2003 Quality Management Reference Answer:
URL = kn VOC 56 wn–MTC mkz 6 av 3 yihstoruqyahkfurrabzgkl _ NyKU _ bddzysbsvnafe 14 lxz-kesqtqjmkmyctoh 16 pkgiz 6 VC 97 zjnfudqkns
Is self-taught financial management the same as intermediate accounting? Not the same, but there are many related, self-study financial management is not as difficult as intermediate accounting! Personally, it is difficult for intermediate accountants to invest in financial management projects!
Self-taught financial management-is the self-taught textbook 0067 financial management the same as 0067 financial management? The self-taught textbook 0 is basically the same, except that one is a self-taught exam. I hope I can help you.
If you have any questions about the self-taught/adult-taught examination, don't know the contents of the test sites for self-taught/adult-taught examination, and don't know the local policies for self-taught/adult-taught examination, click on Mr. official website at the bottom to get the review materials for free: /xl/