Paint melt-blowing is made of imported small molecular nano-materials, which is mainly used for the treatment and protection of various repair surfaces, so that the gloss of the repair parts is consistent with the original paint surface, and the effect of scar-free repair is achieved. This kind of spray can be applied to the treatment of furniture, leather, floor and metal surfaces. There are four kinds of spray: bright, semi-matte, matte and special matte. It is an indispensable repair product for furniture beauticians.

Flap evenly and smoothly

After coloring, smooth the repaired parts with steel wool.

Remove oil stain, watermark and dirt.

Completely remove oil stains, watermarks, dirt, etc. From the spraying part.

Fully and evenly mixing

Before spraying, the jar must be shaken up, down, left and right for about two minutes until it is completely mixed.

Distance 20-30 cm

At a distance of about 20-30 cm from the sprayed part, press the nozzle, shake your wrist quickly to spray, press it quickly and release it, and spray evenly.

Multiple spraying

Spray a few times, spray a few times, blow dry with a hair dryer and spray again.

Pay attention to consistency

If the spraying is uneven or has traces, it can be mixed evenly with new steel wool before spraying. It can also be polished with high-density foam dipped in water wax.

The spraying distance of bright flux should be close.

The spraying distance of bright flux should be close, about 10 cm is appropriate.