I. Daily training management
1 Training requirements:
1) Each operation team (substation) shall formulate its annual training work plan according to the opinions of the Bureau on the annual training of employees and the annual training work plan of the substation operation department, and shall also do a good job in seasonal power supply, accident notification, defect management, equipment pre-examination, equipment maintenance, equipment rating, two-vote filling and on-site operation procedures. According to the change of operation mode and the current business level of actual equipment and personnel,
2) The monthly training plan should be in the form of training lesson plans, which should include: exam explanation, switching operation ticket filling, drawing the second picture silently, accident prediction, and anti-accident drills required by provincial power grid substation operation management regulations; "Electrical Safety Work Regulations" content; The training content to be implemented in the current month in the annual training plan; Phased safety and business learning contents arranged by superior departments; Combine the operation of the unit and the skills of personnel. The specific content of the phased objectives that need to be implemented step by step is highly targeted. All units should organize employees to study, focus on explanation and teaching according to the training and teaching plan;
3) Every week, the webmaster will organize an examination of this week's learning content; The Operation Department trains special personnel to the substation every month to organize the monthly examination of learning content, and the examination methods are mainly closed-book examination, on-site oral answer or simulated operation. The Operation Department organizes a centralized closed-book examination for all substation operators every quarter, and the examination results are recorded in personal training files;
4) Establish centralized management of on-site training of station personnel with ZuoYeDui as the training point. The operation department lists the training outline, and the operation team leader organizes and arranges training lectures. Lecturers are selected from the group leader, stationmaster, long-term value and excellent positive value. Before centralized teaching, report the teaching time and lecturers to the operation department for training, and the operation department will organize personnel to go to the site to evaluate the training effect;
Second, the monthly training content:
Training content from February to March:
time
Training content
First week
Familiar with the basic situation of this station, will recite the introduction of this station, understand the duty mode of this station, and understand the power supply mode and scope of this station. Can tell the operation mode of this site according to the standard terms, and will draw the system diagram of this site silently according to the standard.
Second week
Familiar with the parameters of the main equipment of this station. Can find the field equipment and explain its function according to the primary system diagram of this station.
Third week
Master the requirements and regulations for filling in substation operation tickets.
Fourth week
Strengthen the study of the first, second and third parts of Electrical Safety Work Regulations, and explain and train them one by one according to the actual situation of this station, so as to achieve the purpose of combining practical application.
Fifth week
Master the filling rules of substation accident emergency repair form.
Sixth week
Learn the substation part of "Electric Power Safety Work Regulations"
Seventh week
Be familiar with all kinds of operation tasks and fill in the proposal ticket.
Eighth week
Master the requirements of filling in substation working ticket.
April training content:
time
Training content
First week
Be able to master the situation of users (substations) and loads in this station.
Second week
Familiar with job responsibilities, basic work, tasks and handover contents of substation duty.
Third week
Familiar with the basic requirements and precautions of various operations of this site.
Fourth week
Master the requirements, key points and standards of equipment inspection in this station.
May training content:
time
Training content
First week
Strengthen the study of the fourth, fifth and sixth parts of the Electrical Safety Work Regulations, and explain and train them one by one according to the actual situation of this station, so as to achieve the purpose of combining practical application.
Second week
Strengthen the study of the fourth and fifth parts of Electrical Safety Work Regulations, and explain and train them one by one according to the actual situation of this station, so as to achieve the purpose of combining practical application.
Third week
Strengthen the study of the practical application contents of the sixth to ninth parts of the Electrical Safety Work Regulations, and explain and train them one by one in combination with the actual situation of this station, so as to achieve the purpose of combining practical application.
Fourth week
Strengthen the study of the practical application content of the tenth to fifteenth parts of the Electrical Safety Work Regulations, and explain and train them one by one according to the actual situation of this station, so as to achieve the purpose of combining practical application.
June training content:
time
Training content
First week
Combined with the site, the general part of "Substation Site Operation Regulations" "Electrical Equipment Operation, Transformer Operation and On-load Voltage Regulator Operation" was studied.
Second week
Combined with the site, the general part "circuit breaker operation" of "Substation Site Operation Regulations" is studied.
Third week
Combined with the site, the general part of "Operation of Transformer, Capacitor, Reactor, Cable, Disconnector and Bus" in "Substation Site Operation Regulations" is studied.
Fourth week
Combined with the site, the general part of "Operation of lightning protection device, electrical measuring instrument, microcomputer relay protection device, low voltage distribution device and five prevention devices" in "Substation Site Operation Regulations" is studied.
July training content:
time
Training content
First week
Combined with the site, the general part of "Substation Site Operation Regulations", "Maintenance of High Voltage Electrical Devices, Secondary Circuits and Batteries", was studied.
Second week
Combined with the site, the general part of substation site operation rules and the "operation" part of dispatching rules are studied.
Third week
On the basis of being familiar with the operation mode of this station, I can analyze the operation mode, understand the switching operation principle, understand the operation characteristics of this station equipment and the matters needing attention in patrol maintenance.
Fourth week
Understand the protection switching scheme and matters needing attention of this station, and combine with the actual situation of this station, be able to independently carry out different simulation operations of this station and fill in the switching operation ticket independently.
August training content:
time
Training content
First week
Master the requirements for filling in the main records in duty work, and will fill them out.
Second week
Master the filling requirements of all records and notes in duty work, and will fill them out.
Third week
Familiar with the calculation method of filling in various reports submitted by substations.
Fourth week
Familiar with the standards and requirements of substation file management
September training content:
time
Training content
First week
Understand and master the functions of each module of production management information system.
Second week
Can use the production management information system to carry out all kinds of work.
Third week
Familiar with the use of integrated automation background management machine (the operation team should also be familiar with the use of dispatching automation management platform), and can judge the operation situation according to the contents of the report window.
Fourth week
Familiar with the use of microcomputer five-prevention locking device, can use computer keys to operate knife switches.
10 training content:
time
Training content
First week
Familiar with on-site operation procedures.
Second week
Can do a good job of equipment acceptance according to the on-site operation procedures, and can understand the maintenance test report.
Third week
Be familiar with the emergency (accident) treatment scheme of this station.
Fourth week
According to the emergency (accident) treatment plan of this station, the abnormal situation of equipment (switch tripping, AC grounding, DC grounding and voltage loss of the whole station) can be handled.
1 1 month training content:
time
Training content
First week
Be able to tell and analyze the operation mode of this site according to standard terms.
Second week
Learn the accident handling rules, how to reverse the operation mode and matters needing attention in various abnormal and accident situations; Understand the power supply mode and scope of this station.
Third week
Learn to master the requirements for filling in the operation ticket of this station, and skillfully fill in the switching operation ticket under various operation modes of this station.
Fourth week
Learning "Substation Operation Management Standard" can accurately tell the job responsibilities.
12 training contents:
time
Training content
First week
Combined with the site, the general part of "Substation Site Operation Regulations", "Maintenance of High Voltage Electrical Devices, Secondary Circuits and Batteries", was studied.
Second week
Master the requirements for filling in the main records in duty work, and will fill them out.
Third week
Strengthen the study of the practical application content of the tenth to fifteenth parts of the Electrical Safety Work Regulations, and explain and train them one by one according to the actual situation of this station, so as to achieve the purpose of combining practical application.
Fourth week
Learn the secondary loop and operation and maintenance of substation integrated automation system and DC system operation and maintenance.
III. The training and assessment is based on the Detailed Rules for the Implementation of Training, Assessment and Post Management of Substation Operators.