Second, the examination method: the theoretical knowledge examination should be based on "computer", and the practical operation skill examination should be based on the on-site practical operation method. Virtual equipment is not allowed to replace the practical operation examination.

Third, the examination content:

theory

1. Basic knowledge: basic composition, principle, use, working characteristics and requirements for working environment of hoisting machinery, main parameters of hoisting machinery, requirements for spare parts, functions and uses of various hoisting machinery safety protection devices, functions and requirements of electrical protection system of hoisting machinery, functions and requirements of hydraulic system, judgment and protection of foundation and track safety state, hoisting command signals, lighting and signals, and safety technology of hoisting rigging.

2. Safety knowledge: crane driver's responsibilities, safety management system, safety operation rules, daily inspection and maintenance requirements of hoisting machinery, identification of common faults and dangerous operations, possible dangerous consequences caused by illegal operations, scrapping standards of hoisting machinery parts, safety knowledge of working at heights, safety knowledge of electricity consumption, knowledge of fire prevention and extinguishing, knowledge of preventing mechanical injuries, knowledge of harmful working environment, knowledge of labor protection articles, safety signs and emergencies.

3. Knowledge of laws, regulations and standards.

Actual operation

1, on-site operation identification ability (identification of main parts and components, identification of safety signs on the job site);

2, the portal crane driver basic operation

No-load operation of mechanism-lifting mechanism, from small lifting height to lifting height, running in the whole process; The main and auxiliary towers (cars) run, and the traction mechanism runs all the way;

Operation of mechanism with load-the hoisting mechanism lifts a certain load to a certain height, and the main and auxiliary towers (cars) run for a certain distance or swing at a certain angle, and then the mechanism is towed for a certain distance.

Operator's requirements for the operation of portal crane: When running with no load and load, the operator is required to put the spreader or load from one place to another according to the instructions of the commander. If linkage is needed, the above actions can be completed through the joint operation of mechanisms, and each operation should be stable and accurate.

Fourth, if you want to get a certificate, you must get more than 70 points in both theory and practice. After passing the examination, the Quality Supervision Bureau can issue certificates.