In 2022, the examination time for the first-class construction engineer in Hunan Province has been set as 1 19,1October 20th. According to the registration arrangement of the first-class construction engineer in previous years, the registration time is expected to start in July. So what is the registration process of Hunan first-class builders in 2022? Where is the registration entrance? The registration column of the first-level builder's exam of Hunting Test Network answers your questions about the registration process, registration entrance, application conditions and so on.
2022 Hunan First Class Construction Engineer Registration Entrance: China Personnel Examination Network. Candidates can log on to China Personnel Examination Network (/) within the specified registration time, click Online Registration in the navigation on the left, and enter the "National Professional and Technical Personnel Qualification Examination Registration Service Platform" to register.
Registration process of first-class construction engineer in Hunan in 2022;
(a) login registration system
After the candidates log in to the system, they should register according to the operation prompts. If the candidate does not upload photos, the candidate needs to upload photos, and the system will automatically switch to the photo upload page, read the photo requirements and related instructions carefully, click the Select Picture button, select the photos to upload, and the photos will be displayed in the area to upload. Click the upload photo button. The system pops up a prompt that the photo was uploaded successfully. Candidates click the Enter Online Registration button to register online. As shown in the figure:
If the identity, education and degree in the registration information fail to pass the verification, a corresponding prompt message will pop up, and the registration can not continue until the verification is completed.
(two) to modify the registration photos of the first construction.
After the photo is uploaded successfully, it is not allowed to be modified. If there are special reasons, the uploaded photos must be modified. Please select the exam you want to apply for, and then contact the provincial and municipal personnel examination center where you apply for it (telephone number of each province: telephone number of each province) to modify it. The test center staff will review the registration information, and allow the revised candidates to log in to the registration system again and enter the registration photo maintenance interface (as shown below).
Read the photo requirements and related instructions carefully, click the Select Picture button, and select the photo to upload. The photo will be displayed in the area to be uploaded. Click the Start Upload button to finish uploading photos.
Download address of photo review processing tool:/n/2014/061/c385858-25135705.html.
(3) choose the province to apply for.
After the photo is uploaded, click on the left to enter online registration to enter the examination selection interface, select the examination to be registered in the examination list on the right, click on the select button to enter the province selection interface, select the registration province, and click Next to display the registration certification notice of professional and technical personnel qualification examination, as shown in the figure. After reading, select I have read and agreed, and click Next to enter the application description. If the candidate doesn't want to register, click "Quit Registration" to quit the exam registration.
Important note: the application notes are important matters that the applicant must read and understand. Please read it carefully. If the candidate doesn't want to register, click "Quit Registration" to quit the exam registration.
Click Next to enter the registration information maintenance page and fill in the registration information.
(4) Fill in the application information.
First, choose the city and audit point where the applicant is located, then choose the level and major of the application, choose the examination subjects to apply for, and truthfully fill in my other application information (see the figure below). After filling in the form, enter the verification code and click Save, and a confirmation box will appear to save the information, including certificate type, certificate number, name, registration level, registration major, examination subjects and other information. After verification, click OK.
1. If it is a normal registered candidate, click Save to pop up the page of signing the letter of commitment, and select Submit. If you choose not to submit for the time being, the registration will be suspended.
2. If this person is not credible, click Save and the following prompt will pop up:
Then confirm the basic information of registration for the second time.
Important note:
1. If you encounter policy and business problems, you can consult the telephone at the back of the province.
2. If the input information does not meet the registration requirements, an error message will be prompted and saved after modification.
3. Be sure to ensure the accuracy of name, ID number, application level, application major and subject information.
4. When applying for general practice, the investment education and professional working years should meet the requirements of the application conditions.
5. When applying for an exemption subject, you must meet the requirements of professional positions, academic qualifications and working years.
After saving the registration information, enter the applicant status interface (see the figure below).
The left side of the interface displays status information, and the right side displays operation tips. Please refer to the above information to carry out relevant operations until the registration is completed.
Important note:
1. The local examination institution is responsible for reviewing the registration conditions. Please check the status online in time to facilitate the next operation.
2. The system will prompt the next step according to the candidate's identity, education and degree status.
3. The registration information cannot be modified after confirmation. Please check carefully before confirmation to ensure completeness and accuracy.
4. Please conduct the qualification examination according to the stipulated time and method, and pay the examination fee.
(5) Upload the first construction project registration certification materials.
If the candidate's academic qualifications and degree information are not within the scope of automatic verification, the candidate must upload proof information consistent with his identity, academic qualifications and degree, and upload proof materials such as academic certificates and degree certificates according to the tips on the registration page.
(6) Confirmation of registration information
Candidates need to confirm the registration information after filling in the registration information or uploading the certification materials. Click the registration information confirmation icon in the registration status to enter the registration information confirmation page. Click the confirm button to pop up the registration confirmation page. Click OK, and the prompt "Please check the registration information carefully to ensure completeness and accuracy" will pop up. After confirmation, click OK to complete the confirmation of registration information. After the registration information is confirmed, the system will check the information filled in by candidates who meet the registration conditions. If the conditions do not match, the status bar will display a warm reminder:
After the registration information is confirmed, you need to print the registration form. Click the Print Registration Form button on the left menu bar of the system to enter the registration form download interface (see the figure below).
If a PDF file reader is installed on the local machine, click Open to enter the PDF editing software, and then connect the printer to print. If the local machine does not have a PDF file reader installed, you can click the Save button to save the file and print it on the computer with a PDF file reader installed.
(seven) the first-class construction engineer registration qualification examination
After printing the registration form, applicants need to go to the designated audit point for qualification examination in accordance with the regulations of the local examination institutions. After examination, applicants who meet the examination requirements can log on to the website again to check the examination status. If the status is passed, the applicant can pay the examination fee according to the specified time.
If the qualification examination fails, candidates can inquire about the reasons for the failure of qualification examination through the status information column on the examination status page. If you really do not meet the registration conditions, you can click on the left to modify the registration information and modify the registration conditions to confirm the registration information again, waiting for the examination institution to review.
Qualification verification has three results.
1. Automatic verification passed.
2. Waiting for online verification by the management organization.
3. Go to the audit site for on-site verification.
Candidates can cancel the approval confirmation and modify the information before paying the fee: candidates click the menu on the left to modify the registration information to enter the cancellation confirmation interface, and click the Yes button to cancel your approval status and confirmation status and modify the registration information.
(eight) the construction engineer registration fee
There are two ways for applicants to pay fees: online payment and on-site payment.
If the local examination institutions pay on-site fees, please pay the examination fees at the designated place.
If online payment is implemented, you need to log in to the registration system to choose the exam, click Pay on the exam status page, and pay according to the relevant tips on the page.
Important note: Before formal payment, carefully check whether the reported subjects and fees are accurate.
In 2022, Hunan first-class constructor registration and first-class constructor examination registration process.
Hot spot: Has the first building been crossed in 2022? When will the results of the first construction in 2022 be announced?
Recommended: 2023 First Construction Registration Time and Examination Time | First Construction Preparation Free Information Kit
Exam preparation: real questions over the years+answers | Review materials of a builder | Free audition of an architectural course.
Set up preparation materials/exam study packages in 2022/One-click receipt of warm tips: As the exam policies and contents are constantly changing and adjusting, the above information provided on this website is for reference only. If you have any objection, please refer to the contents published by the authoritative department!
If you have questions about the qualification examination, don't know how to test the content and the local registration policy, click on the bottom to consult the hunting test network and get the review materials for free.