Current location - Education and Training Encyclopedia - Education and training - Take the electrician certificate!
Take the electrician certificate!
Basic simulation part of electronic technology (fourth edition)

Basic digital part of electronic technology (fourth edition)

Editor-in-Chief: Kang, Huazhong University of Science and Technology.

Estimated price: 35.60 yuan for analog volume and 35.00 yuan for digital volume.

Major: undergraduate major in electrical information.

The first edition of this book won the special prize of national excellent teaching materials and the second prize of national scientific and technological progress. In order to adapt to the new situation in the electronic information age and the urgent need to cultivate cross-century electronic technical talents, on the basis of the previous edition, through teaching reform and practice, the conventional contents have been carefully selected, and the basic knowledge of electronic systems and signals, new devices and new technologies has been increased, including the application of PSPICE software to analyze and design electronic circuits. Adapting examples, reviewing thinking questions and exercises to promote teaching. The simulation volume includes: introduction (electronic system and signal), bipolar, field effect device and amplifier circuit, various amplifier circuits (power supply, integrated operation, feedback, etc. ), signal generation, computer aided analysis and design of DC regulated power supply circuit and electronic circuit. Digital fascicle includes: digital logic foundation, integrated logic gate circuit, analysis and design of combinational logic circuit, analysis and design of common combinational logic functional devices, flip-flop, sequential logic circuit, common sequential logic functional devices, memory and programmable logic devices, pulse generation and shaping, analog-to-digital and digital-to-analog converters, and analysis and design of digital system. The teacher's manual matched with the simulation volume includes the characteristics of the textbook, the difficulties and depth requirements of each chapter, suggestions on class arrangement, problem solving and instructions on the use of PSPICE program.

This book is suitable for electrical information majors in colleges and universities (including original electrical, automatic control, electronics, etc.). ), but also for the reference of corresponding professional engineers and technicians.

Logic Design of Digital Circuits —— Pulse and Digital Circuits (3rd Edition)

Editor: Wang

Estimated price: 3 1.90 yuan.

Major: undergraduate electrical information

This book is the third edition of Pulse and Digital Circuits. The second edition won the first prize of excellent teaching materials of the Third State Education Commission and the third prize of scientific and technological progress of the Third Ministry of Education. This book adapts to the rapid development of this subject, correctly handles the breakthrough point of textbook updating, greatly simplifies and compresses the contents of traditional discrete components, small-scale integrated circuits and pulse technology, and appropriately adds new contents (PLD and testability, etc.). ) reflects the frontier level of contemporary theory and technology development of this discipline, which not only conforms to the basic teaching requirements of this course promulgated by the former State Education Commission, but also conforms to the reality of the current reform of the teaching content and curriculum system of engineering courses in China. The book consists of eleven chapters, including digital circuit foundation, combinational logic circuit, sequential logic circuit, semiconductor memory, PLD and its application, testability design, pulse unit circuit and so on. It covers the basic theory and method of digital circuit logic design, with clear concept, accurate positioning, appropriate materials and good readability.

This book can be used as a teaching material for electrical information, electronic information engineering, communication engineering and electronic science and technology in colleges and universities, and can also be used as a reference for engineers and technicians in this discipline and other similar disciplines.

Linear part of electronic circuit (fourth edition)

Editor: Xie Editor

Estimated price: 27. 10 yuan.

Major: undergraduate major in electronic information and communication.

This book will be published in July 1999. Compared with the third edition, this revised edition has the following characteristics: the basic knowledge is more systematic and comprehensive; The basic concepts are more rigorous, accurate and forward-looking, and new circuit concepts such as current feedback, data sampling and current mode are introduced. Rich examples, collocation exercises and introduction of PSPICE analysis; Clear thinking and easy to teach and learn.

The book consists of six chapters: transistor diode, transistor triode, field effect transistor, amplifier foundation, negative feedback in amplifier, integrated operational amplifier and its application circuit.

This book can be used as a teaching material for the courses of "Linear Electronic Circuits" and "Low Frequency Electronic Circuits" for electronic information and communication majors in colleges and universities, and can also be used as a reference for engineers and technicians engaged in electronic technology.

Fundamentals of Digital Electronics Technology (4th Edition)

Editor: Tsinghua University Electronic Teaching and Research Group, edited by Shi Yan.

Estimated price: 36. 10 yuan.

Major: electrical information major

On the basis of basically maintaining the theoretical system of the third edition, this book supplements the content of programmable logic devices in a larger space and becomes an independent chapter. The original chapter 7 "large scale integrated circuit" was changed to "semiconductor memory". In addition, a voltage controlled oscillator and a flash memory are added. In order to facilitate the teaching of digital circuits, the basic knowledge of semiconductor diodes, triodes and ideal operational amplifiers has been appropriately added in this revision, and the self-test questions, thinking questions and exercises in the book have also been revised and supplemented.

This book can be used as a teaching material for electrical information automation, electrical engineering and automation, and can also be used by other related majors and social readers.

Modern electronic technology

Editor: Xi Dexun

Estimated price: 25.60 yuan

Major: electronic major

This book was written by a professor of Nanjing University based on his years of teaching experience and his feelings of working abroad. Starting from practical electronic application technology, this book introduces and analyzes the composition method and application principle of high-performance circuits based on high-speed and high-resolution analog circuits, high-speed digital circuits, new active filters and nonlinear circuits. Specific circuits and application examples are very rich. As a follow-up course of electronic technology foundation, this course can enable students to accept advanced technology and master its application methods, which is conducive to cultivating high-tech talents to meet the needs of 2 1 century.

This book can be used as a teaching material for electronic majors in colleges and universities, and can also be used by other majors and social readers.

digital logic circuit

Editor: Shen Bohong, King of Chu.

Estimated price: 28. 10 yuan.

Major: Information and Electronic Science

This book is written by Professor Peking University based on many years' teaching and scientific research experience and referring to excellent textbooks at home and abroad. This book is divided into two parts. The first six chapters introduce the design of combinational logic circuit, feedback circuit and synchronous sequential logic circuit. The last three chapters briefly introduce the composition of CPU, interface circuit and devices containing CPU. The first feature of this book is to combine digital logic circuit, microcomputer principle and interface technology to establish a new structural system; Second, it is unique in material selection and proposition discussion; Thirdly, he is good at inspiring readers' thinking in writing narration, with a lot of clever thinking problems and exercises, which is conducive to cultivating students' innovative ability.

This book can be used as a textbook for information and electronic science majors in colleges and universities, and can also be used by other majors and social readers.

Electrotechnics (Electrotechnics Ⅰ)

Editor: Editor Yao Haibin

Estimated price: 2 1.90 yuan.

Major: Non-electrical major.

Professor Yao Haibin of Tianjin University is the editor-in-chief, and Professor Tsinghua University Zong Kant and Professor Sun of Beijing Institute of Light Industry are the presiding judges.

This book consists of four parts, *** 1 1 chapter. The first part is circuit theory, including 1 ~ 6 chapters; The second part is magnetic circuit, motor and electrical control, including 7 ~ 9 chapters; The third and fourth parts are electrical measurement and safe electricity use, which are 10 and 1 1 respectively. This textbook focuses on the relationship between classic content and modern scientific achievements, the relationship between advanced nature and teaching applicability, and the relationship between imparting knowledge and cultivating students' ability. The content of the teaching material is based on the foundation, application and advancement of electrical technology, focusing on the basic concepts, theories and analysis methods of circuits and magnetic circuits, taking the application of these theories, methods and technologies as the leading factor, integrating new technologies and achievements in the electrical field, and enhancing the vitality and vitality of the teaching material. This textbook has a very high starting point, starting with the concept of circuit model, circuit-network-system, and then expanding from the whole to the part, from the surface to the inside, introducing structural constraints, component constraints and methods of analyzing circuits, and compiling controlled sources, frequency characteristics and so on. With a large amount of information, we should pay attention to practical application and integrate new technologies and achievements in the field of electrical engineering into teaching materials. For example, in the chapter of motor, the soft start method and frequency conversion speed regulation technology of three-phase asynchronous motor are introduced; In the chapter of electrical control, the programmable controller (PLC) is introduced. The reference period of this book is 55 ~ 70 hours, which is used by non-electrical majors in colleges and universities, and combined with electronic technology (Electrotechnics Ⅱ).

Electronic technology (electrotechnics Ⅱ)

Editor: Editor-in-Chief Liu Quanzhong.

Estimated price: 22. 10 yuan (paperback)

Major: Non-electrical major.

Edited by Professor Liu Quanzhong of Tianjin University, presided over by Professor Wang Hongming of Tsinghua University and Professor Liu Yuntao of Beijing Institute of Technology.

This book is divided into 10 chapters, including: semiconductor devices, basic amplifier circuits, negative feedback amplifiers, applications of integrated operational amplifiers, power electronics technology, logic gates and combinational logic circuits, sequential circuits, generation and shaping of pulse waveforms, conversion between analog and digital quantities, and memory. This textbook is rich in content and information. Pay attention to correctly and properly handling the relationship between traditional content and new knowledge and technology. For example, some unnecessary repetitive contents are deleted, and the starting point is low and the contents are relatively old, which greatly weakens the analysis of the internal conduction mechanism of electronic devices and integrated circuits and the working principle of internal circuit composition, and weakens the analysis and calculation of discrete component circuits. Moreover, more new contents have been added in theory and applied technology, which embodies the development direction of the subject and broadens the professional application of this textbook. For example, a chapter on power electronics technology is added to introduce various new power electronic devices, rectifiers, voltage regulators and inverter circuits. Programmable logic devices are added in the chapter of sequential circuits. Highlight the application knowledge of electronic technology and pay attention to ability training. For example, the application of integrated operational amplifier is highlighted in analog technology, the external characteristics and uses of integrated operational amplifier are highlighted in digital circuits, comprehensive training is strengthened, and more application examples are introduced.

The reference period of this book is 55 ~ 70 hours, which is used by non-electrical majors in colleges and universities, and is used in conjunction with Electrical Technology (Electrotechnics I) edited by Yao Haibin.

Electrical technology (less hours)

Editor: Editor-in-Chief Tang Jie

Estimated price: 27.90 yuan

Major: engineering non-electrical major

This book is edited by Professor Tang Jie of Dalian University of Technology. Professor Wang Hongming from Tsinghua University, Professor Zhu and Professor Sun from Shanghai Jiaotong University served as judges.

1. This textbook basically covers the teaching contents of the basic requirements of the courses Electrical Technology (Electrotechnics Ⅰ) and Electronic Technology (Electrotechnics Ⅱ) promulgated by the State Education Commission 1995.

2. According to the research results of the teaching content and system reform of this course, update the teaching material system and content to meet the needs of the development of modern science and technology and the training of talents in the 2 1 century. For example, the node voltage method and loop current method, DC motor, control motor and synchronous motor are deleted in the electrical technology part; In the electronic technology part, the analysis of the internal structure of controllable trigger circuit, discrete element gate circuit and operational amplifier is deleted. The calculation of non-sinusoidal AC circuit is simplified, and programmable controllers and programmable logic devices are added. At the same time, application examples are strengthened and modern communication technology is introduced.

3. Reduce the theoretical depth, broaden the knowledge and strengthen the engineering application knowledge, so as to adapt to the trend that the teaching hours of electrotechnics are less and less, and most professional hours are reduced.

4. Selected examples and exercises in this book; Each section is accompanied by "analysis and thinking". The content is combined with reality, and the number of questions is moderate, which can play a role in reviewing, consolidating, broadening knowledge and strengthening ability training.

The main contents of this book include: DC circuit, transient analysis of circuit, AC circuit, power supply and consumption, transformer, motor, electrical automatic control, semiconductor device, basic amplifier circuit, integrated operational amplifier, combinational logic circuit, sequential logic circuit, conversion between analog signal and digital signal, and modern communication technology.

It can be used as a teaching material for non-electrical engineering majors in colleges and universities, and can also be used by other majors and social readers.

Electrical engineering electronics

Editor: Ye Yao Bo

Estimated price: 28. 10 yuan (paperback)

Major: engineering non-electrical major

This book is edited by Professor Ye Tingxiu of Zhejiang University, and Associate Professor Zhang is the deputy editor. Professor Wang Hongming from Tsinghua University and Professor Zhu from Shanghai Jiaotong University served as presiding judges.

1. This textbook basically covers the teaching contents of the basic requirements for the teaching of Electrical Technology (Electrotechnics Ⅰ) and Electronic Technology (Electrotechnics Ⅱ) issued by the State Education Commission 1995.

2. This textbook has established a new textbook system on the premise of ensuring the foundation, strengthening the application, selecting the content and reflecting the advanced nature. The reform is relatively strong. Combined with the teaching and research results of system reform of this course, the boundary between electrician technology (electrotechnics I) and electronic technology (electrotechnics II) is broken, and the electrician technology and electronic technology are closely combined, with the order of components → circuits → systems and the application of modern electrician technology as the main line of the book, which conforms to the cognitive law and is innovative compared with traditional textbooks.

3. Improve the starting point of the teaching content of this course, and introduce the electronic device model into the basic knowledge of circuit. This paper introduces the content of power electronics, enriches new power electronic devices, such as rectifier, inverter, DC voltage regulation, AC voltage regulation and frequency conversion, and introduces the principle and application of programmable controller.

4. Pay attention to ability training and carefully select examples and exercises.

The main contents of this book: circuits and circuit components, fundamentals of circuit analysis, basic circuits of discrete components, digital integrated circuits, integrated operational amplifiers, waveform generation and transformation, measurement and data acquisition systems, power electronic circuits, magnetic circuits and electrical control technologies. It can be used as a teaching material for non-electrical engineering majors in colleges and universities, and can also be used by other majors and social readers.

Electrical Technology (I) Electrical Technology (5th Edition)

Electrical Technology (Volume II) Electronic Technology (Fifth Edition)

Editor: Qin

Estimated price: 29.80 yuan for the first volume and 25.90 yuan for the second volume.

Major: engineering non-electrical major

This book is edited by Professor Qin from Harbin Institute of Technology, presided over by professors from Dalian University of Technology and Harbin Institute of Technology.

The biggest characteristics of teaching materials are: protecting foundation, emphasizing application, emphasizing ability training, and loving teaching and learning. The first volume has fewer changes than the fourth edition. It mainly increases the content of circuit frequency characteristics, merges asynchronous motor and synchronous motor into the chapter of AC motor, and deletes synchronous generator. Based on the basic circuit of relay contact control, the content of programmable controller is added. Compared with the fourth edition, the second volume has changed greatly. Generally speaking, it weakens analog electronic circuits and strengthens digital electronic circuits. In the analog part, the amplifier circuit composed of discrete components is compressed, which strengthens and enriches the integrated operational amplifier and its application. In the power supply part, the stabilized power supply and thyristor speed regulation system are enriched; In the logic function representation, Karnaugh map and its application are strengthened, the design of combinational logic circuits is strengthened, and the content of programmable logic devices is increased, which meets the new technology of digital circuit design and application. The fifth edition has made great changes to the selected examples and exercises, which is more practical and convenient for ability training.

This book is a teaching material for engineering non-electrical majors in colleges and universities, and can also be used by other majors and social readers.

Circuit principle (up and down)

Editor: Zhou Shouchang, editor-in-chief

Estimated price: 26.90 yuan for the first volume and 2.90 yuan for the second volume/kloc-0.

Major: electrical and information major.

This book is the key textbook of the Ninth Five-Year Plan of the Ministry of Education. It was revised by teachers such as Zhou Shouchang and Xie Pinfang from the School of Electrical Engineering of Chongqing University on the basis of Circuit Principles edited by Jiang Zejia. The book is divided into two volumes, and the content organization is relatively independent. Among them, the first volume is a compulsory content, which can basically meet the basic requirements of electrical information specialty for circuit theory, and contains a small amount of modern circuit theory while paying attention to teaching application; The second book systematically, completely and deeply introduces the knowledge of modern circuit theory, which can be used as an elective course.

As a textbook of basic technical courses, this book has a reasonable system, appropriate materials, correct exposition and a high scientific level. One of its characteristics is to make full use of duality in teaching to inspire readers to make comparative analysis and help readers master the teaching content in depth.

This book can be used not only by students majoring in electrical information in colleges and universities, but also for self-study and reference by enthusiasts.

Introduction to engineering electromagnetic field

Editor: Feng, Ma

Estimated price: 18.00 yuan.

Major: Electrical Engineering and Automation.

This book is written by the Teaching and Research Section of Electrical Principles of Xi Jiaotong University on the basis of years of teaching research and practice. The contents of this book are well connected with electromagnetism in physics, and the contents of special relativity and electromagnetic field in anisotropic media are removed, and the corresponding contents of quasi-static electromagnetic field and waveguide and resonator are added, which not only ensures the basic requirements of electromagnetic field theory course for high voltage specialty, but also appropriately expands the electromagnetic knowledge range of high voltage specialty. The book briefly introduces the application fields and application background of related teaching contents in a few words, which is helpful to improve students' learning interest and enhance their learning motivation. This book also provides readers with a wealth of examples, thinking questions and exercises, the number of which is dominant in the existing domestic textbooks.

This book is suitable for all majors in electrical engineering and automation, and can also be used as an elective course or as a reference for social readers.