Enterprise safety commitment 1 I promise:
1. Strictly abide by the safety production rules and regulations and operating procedures of this unit, and obey the management of this unit.
2. Consciously accept the education and training of safety production, and master the knowledge of safety production in this position.
3. Refuse "three violations", wear and use labor protection articles correctly, and do not harm yourself and others.
4. Improve safety production skills, understand the potential risks and hazards of the post, and enhance the ability of accident prevention, emergency treatment, escape and self-help.
5. Consciously put forward suggestions on the work safety of this unit, criticize, report and accuse the existing problems, and report the hidden dangers of accidents or other unsafe factors immediately.
Commitment: xx
20xx June xx
In order to ensure the company's safe production work and safe and reliable power supply, and realize all the safety production targets throughout the year, all members of the leadership team of our company solemnly promise to the people on behalf of all employees that they will earnestly perform their safety production duties in their work, faithfully implement the provisions of various safety work systems, and strive to:
1, strictly abide by national laws and regulations, adhere to the policy of "safety first, prevention first", conscientiously implement the responsibility system for safety production of personnel at all levels, and strive to achieve controllable, in-process and controllable safety production.
2. Establish and improve the safety production guarantee system and supervision system, improve the safety production command system, improve the safety management and assessment system, formulate the key work requirements and measures to achieve the company's annual safety production goals and follow them up.
3. Carry out safety assessment in power grid dispatching, operation, maintenance and other production work, do a good job in dangerous point analysis and pre-control, vigorously carry out standardization work, scientifically analyze the safety situation of enterprises and workplaces, find out weak links and hidden dangers of accidents, and take effective preventive measures in time.
4. Formulate emergency plans for safety accidents such as heavy casualties, large-scale power failure, large-scale equipment damage, and comprehensive shutdown of important substations, establish a systematic, graded, consistent and coordinated emergency system for safety accidents, and organize their implementation.
5. Strengthen the training and education of employees' safety knowledge and safety work regulations, and make them correctly used in practical work. Do a good job in technical training, especially when adopting new technologies, new processes, new materials or using new equipment, write relevant safety technical rules and regulations in time, and train operators to master their safety technical characteristics and operation methods.
6, the investigation and handling of accidents, strictly implement the principle of "four pass". For major or typical accidents, timely grasp the accident situation, hold a special accident analysis meeting, put forward measures to prevent accidents from happening again and conscientiously implement them.
7, to ensure the full investment of funds needed for safety production, focusing on ensuring the extraction and use of funds needed for anti-accident measures and safety technology labor protection measures plan ("two measures" plan), establishing safety production incentive fund, and ensuring the extraction and use of funds needed for safety incentives.
8. Supervise and guide the demand side safety inspection. If there are potential safety hazards, a rectification notice will be issued to urge and guide users to rectify in time to prevent user accidents from endangering personal safety, power grid and equipment. Inspect and test users and rural power equipment in accordance with the prescribed standards to prevent unqualified equipment from accessing the power grid.
9. Conscientiously implement the policies, regulations and provisions of the state and higher authorities on the protection of power facilities, fire safety and anti-theft of electricity, earnestly do a good job in the safety management of power facilities under the jurisdiction of this enterprise, and ensure the safe operation of power facilities. Improve the public security management system, implement safety precautions, regularly organize public security and fire safety inspections and fire drills, and cooperate with local public security departments to investigate external damage and fire accidents.
10, earnestly implement various measures for rural power safety work, focus on "three defenses and ten essentials" throughout the rural power safety work, and take "five checks and six noes" as the breakthrough point to ensure rural power safety.
1 1. Strengthen the company's safety culture construction, organize political departments and party organizations, carry out ideological and political work closely around the enterprise's safety production situation, and adopt various vivid and effective forms to educate employees on safety thoughts, professionalism and compliance with rules and disciplines, so that employees can establish a firm "safety first" thought.
12, implement the regulations on diversified business safety, and urge the strict implementation of the management system for contracted projects and temporary workers. Standardize contract management, clarify safety responsibilities and check the implementation of safety measures.
13. Strictly implement the requirement that leaders and managers at all levels must be present during production operations, strengthen the supervision and management of production safety, and adhere to the principle of "three haves and three musts" for maintenance, construction and test projects. Actively carry out on-site inspections and unannounced visits, promptly correct and investigate the "three violations", and leaders and management personnel do not command or force risky operations in violation of regulations.
Commitment unit (seal):
Date:
Enterprise Safety Commitment Chapter III Party A: (Employer)
Party B: (Contractor)
In order to strengthen the management of minor repairs and maintenance of national and provincial trunk highways and their ancillary facilities, and make them always in a good technical state, according to the Operating Rules for Fine Maintenance Management of xxx Highway Bureau and the regularity and particularity of minor repairs and maintenance of highways; In order to accomplish one or more of the following tasks and clarify the responsibilities, rights and obligations of Party A and Party B during the operation, Party A and Party B reached an agreement through consultation.
1. Term of validity of the agreement: from the date of the month to the date of the month.
Second, the scope and content of work:
Scope of work: national highways and provincial highways within the jurisdiction of xxxxxxx;
The work contents are as follows: (specific work place, content, start-up and completion time, quality requirements, etc. The notice of commencement shall be issued by Party A and attached to this Agreement).
(1) subgrade
1, maintenance items:
(1) Arrange shoulders and slopes, remove sundries and keep the road surface clean and tidy;
(2) Dredge ditches and keep the drainage system unblocked;
(3) Remove weeds in retaining walls, slopes and guardrails, clean expansion joints, dredge drainage holes and loosen stones;
(4) Repair of mortar trench and GBM block.
2. Minor repairs
(1) Excavate side ditches, intercepting ditches or laying side ditches by stages;
(2) Remove sporadic landslides, fill gaps in subgrade, and deal with slight subsidence and frost boiling;
(3) Handling of bump at the top of bridge head and culvert;
(4) Repair the local damage of retaining wall, slope protection, slope protection road, drainage ditch, guardrail or anti-ice and snow facilities;
(5) locally reinforce the shoulders.
(2) Pavement
1, maintenance project
(1) Remove dirt and sundries on the road surface and keep the road surface clean and tidy;
(2) Remove road water, snow and smoothies, spread anti-skid materials, dust suppressants or compact snow to keep traffic smooth;
(3) Treatment of asphalt pavement diseases such as flooding, expansion, cracks and looseness;
(4) Repair and painting of kerbs.
2. Minor repairs
(1) Handling of vehicle bump at bridge head and culvert top;
(2) Repairing potholes, subsidence, controlling waves, local cracks, gnawing edges and other diseases of asphalt pavement;
(3) Cleaning, filling and plugging of cracks in cement concrete pavement, and local repair of plates.
(3) Bridges and culverts
1, maintenance project
(1) Remove silt, snow, accumulated water and sundries and keep the bridge deck clean;
(2) dredge culverts, channels under bridges and sediments;
(3) Maintenance of expansion joints, dredging of drainage holes, adding lubricating oil to steel bearings and painting of railings;
(4) Daily maintenance of bridges and culverts.
2. Minor repairs
(1) local repair, replacing bridge railings and repairing drainage holes, with slight damage to expansion joints, brackets and deck;
(2) Repairing minor damage to piers and slopes;
(3) Reinforcement treatment of culvert import and export paving;
(4) Local maintenance of the channel, dredging and repairing the drainage ditch.
(4) Facilities along the route
1, maintenance project
(1) signs, milestones,100m piles, boundary pillars, delineator, fences, etc. Buried, maintained or cleaned and painted regularly.
2. Minor repairs
(1) guardrail, isolation fence, delineator,; Repair, paint or partially replace signs, milestones,100m piles and boundary markers;
(2) Local marking of pavement markings.
(5) Greening
1, maintenance project
(1) Tending, budding, pruning, pest control and fertilization of street trees and flowers;
(2) Seedling raising, pest control, fertilization and weeding in the nursery.
2. Minor repairs
(1) replanting of street trees and flowers;
(2) Paint street trees.
(6) Other projects
Other projects arranged by Party A according to the needs of maintenance projects.
Third, minor repairs and maintenance quality objectives
The quality requirements of highway maintenance and minor repairs meet the following standards:
(1) subgrade maintenance should keep the subgrade solid, the slope stable, the drainage unblocked, the dimensions and slopes of each part meet the design requirements, and the highway alignment is suitable. Through maintenance and management, its quality is not lower than the original design standard;
(2) Pavement maintenance must ensure that the pavement has no serious diseases that affect traffic safety, keep the flatness intact and the transverse slope moderate, ensure the driving performance of the pavement and prolong the service life;
(3) Bridges and culverts must first meet the requirements of load grade, ensure the traffic of vehicles and ensure that all parts are in good working condition; Dredge the riverbed in time to ensure the smooth flow of water;
(4) Maintain the facilities along the line, clean up and repair local defects in time, and keep them in good technical condition;
(5) The greening project should be replanted, trimmed and maintained in time;
(6) If there is no corresponding standard basis, it shall meet the technical requirements put forward by Party A before the project starts.
Four. Responsibility of both parties
(I) Party A's responsibilities
1, responsible for the formulation and management of maintenance contracts;
2. Be responsible for arranging and scheduling Party B's work;
3. Be responsible for the business guidance and work assessment of Party B;
4. Be responsible for the inspection and daily inspection of Party B's maintenance work;
5. Be responsible for the management and measurement payment of maintenance funds.
(II) Party B's responsibilities
1. The management and staff of Party B shall be employed by Party B, and shall be responsible for the payment of wages and labor benefits. During the contract period, Party B's management and staff shall abide by national laws and regulations, consciously abide by Party A's rules and regulations, and cooperate with the work arrangements of Party A's management;
2. Party B must complete relevant tasks on time, with good quality and quantity according to Party A's requirements;
3. Party A has the right to put forward rectification requirements according to the work content and quality of Party B, and Party B shall actively negotiate with Party A and make corresponding adjustments according to the negotiation results;
4. Party B shall complete all tasks assigned by Party A in strict accordance with national laws and Party A's rules and regulations, ensuring smooth, safe, comfortable and beautiful;
5. Party B shall pay the employee's salary on time and shall not default. At the same time, Party B shall do a good job in the safety management education of employees and pay the corresponding insurance.
In order to further strengthen the traffic safety management of long-distance bus rental tourist passenger vehicles, the State Council issued a document according to the Safety Management Standard for Road Passenger Transport Enterprises (Trial) and the State Council's Opinions on Strengthening Road Traffic Safety? 20xx？ Document No.30 requires us to learn from the "8.26" Baomao Expressway traffic accident, and our company and drivers solemnly promise:
1. Abide by the Road Traffic Safety Law of the People's Republic of China and its implementing regulations, the Safety Management Code for Road Passenger Transport Enterprises (for Trial Implementation) and other relevant laws and regulations, operate legally and provide quality services.
Two, it is strictly required that the cumulative driving time of passenger drivers within 24 hours shall not exceed 8 hours, the continuous driving time shall not exceed 4 hours, and the rest time at each stop shall not be less than 20 minutes.
Three, strictly implement the one-way mileage of more than 400 kilometers of passenger vehicles, equipped with more than two passenger drivers. For passenger vehicles running on super-long lines, ensure that passenger drivers stop and change people and rest on the ground, and must rest in the parking service area from 2 pm to 5 pm.
Four, for the following three (including three) mountain roads can not meet the requirements of safe passage at night, the bus is prohibited from driving at night (from 22: 00 to 6: 00 the next morning).
Five, passenger cars should be based on chartered passenger signs, in accordance with the agreed time, place of origin, destination, location and route, with a package ticket or a charter contract, and shall not carry passengers outside the charter contract. Drivers and passengers should carry out safety inspection on the articles carried by passengers, and it is forbidden to get on the bus with three products.
Six, no overcrowding, speeding, fatigue driving, drunk driving, mixed passenger and cargo, illegal parking on the highway, incomplete safety facilities and other serious traffic violations.
Seven, to ensure that vehicles meet the safety technical conditions, overdue annual inspection, annual inspection or annual inspection, annual inspection unqualified vehicles are prohibited from driving on the road.
Eight, strictly implement the dispatching system, fill in the basic information such as vehicles, passenger drivers, lines, and signed by the person in charge of the unit.
Nine, strengthen the dynamic supervision of GPS, the person in charge, 24-hour monitoring, real-time monitoring of vehicle driving dynamics, recording and analyzing dynamic information, timely reminding and prompting violations.
Ten, to ensure the normal use of satellite positioning device, keep the vehicle running online. Drivers who intentionally shield the signals of the vehicle-mounted satellite positioning device and destroy the vehicle-mounted satellite positioning device will be severely dealt with.
Eleven, the driver should keep on duty 24 hours a day, and feedback the vehicle operation information at any time. If you don't contact the company and the management department on time, you won't handle the long-distance car rental business next time.
Twelve, to ensure that the car seat belt, safety hammer, fire extinguisher, fault car warning signs are complete and effective, to ensure the smooth exit passage, safety door, emergency skylight opening device is effective, open smoothly.
Eleven, enterprises must do a good job in the preliminary work of long-distance car rental tourism business inspection. Under any of the following circumstances, the long-distance car rental/tourism business shall not be handled and a license shall be issued.
1. Two-shift drivers are not allowed to hire drivers with unknown driving conditions, no passenger vehicle driving experience, poor driving skills and less than three years of driving passenger vehicles to drive long-distance bus rental and tourist vehicles;
2. The driver's illegal score reaches 3- 12 (subject to the illegal inquiry table of the traffic police brigade);
3. Requirements for passenger cars: medium-sized and medium-sized passenger cars are more than three years (excluding three years);
4, privately contracted long-distance bus rental travel business, once found in accordance with the relevant provisions of serious treatment.
Committed passenger transport unit: Minle Taitong Automobile Passenger Transport Co., Ltd. (seal)
Commitment drivers:
Commitment drivers:
Passenger car number plate:
20XX September 4th
As the first person in charge of production safety in this enterprise, I promise to strictly perform the duties of production safety entrusted by law, and do a good job in production safety management in this unit in strict accordance with national production safety laws and regulations, industry standards and superior deployment requirements to ensure that production safety accidents do not occur. We solemnly promise as follows:
1. Establish and improve the "three systems" of safety production, and fully implement the responsibility system for safety production in each post. The coverage rate of post operation procedures reaches 65,438+000%, and the safety rules and regulations are feasible. Establish a dynamic safety management mechanism of self-improvement and self-improvement, realize the schedule of managers' safety responsibilities and the process of employees' safety responsibilities, and ensure the effective implementation of safety production.
2. Establish a safety production management organization according to law, and provide safety deputies, safety technicians and safety management personnel according to regulations to ensure necessary working conditions, and urge them to earnestly perform their safety management duties and give full play to their roles.
3. Strictly implement the system of regular safety production meetings, preside over a regular meeting to prevent safety accidents at least once every quarter, and arrange, deploy, supervise and inspect the safety production work of the unit; Supervise the safety deputy to organize a safety production dispatch meeting at least once a month, analyze and study the problems existing in the work, put forward solutions and supervise the implementation of various work and preventive measures.
4. Strictly implement the safety production planning system, organize relevant institutions and personnel, and carry out hidden danger investigation and management, full-time education and training, equipment maintenance, dangerous point monitoring and emergency rescue according to safety production laws and regulations, industry standards and deployment requirements of the government and relevant departments, combined with their own reality.
Training, safety production funds, etc. , into the enterprise's annual production safety plan, item by item clear completion time limit, responsible personnel, safeguard measures and compliance requirements, and seriously organize the implementation, to ensure the orderly work.
5. Strictly implement the safety production commitment system, carry out commitment activities at different levels internally, organize all staff to sign a commitment letter on safety production, educate and mobilize all cadres and workers to abide by safety commitments, perform safety duties, and implement safety measures, so as to truly ensure that unsafe production is also safe.
6. Do a good job in the investigation and management of hidden dangers, and organize the investigation of hidden dangers in all workshops, teams, posts, personnel, production and business premises, equipment and facilities, and production and business links in strict accordance with the provisions of "monthly inspection at factory level, weekly inspection at workshops, daily inspection at shifts (posts) and daily inspection at hazard points", and the investigation rate of hidden dangers in posts reaches 100%. Strictly implement the safety checklist and rectify the hidden dangers found according to the requirements of "four decisions" (measures, personnel, funds and time limit). The timely rectification rate of hidden dangers reached 100%.
7. Effectively strengthen safety training and education, and ensure that 100% of the main person in charge, safety management personnel and special operations personnel of this unit hold relevant certificates in accordance with relevant state regulations; Earnestly do a good job in safety education and training for all employees, and constantly improve employees' safety awareness and skills, so that employees (including all kinds of temporary workers) 100% can only take up their posts after passing the training.
Eight. Conscientiously do a good job in hazard identification and risk assessment, organize relevant deputies and institutions, and conduct comprehensive hazard identification and risk assessment for enterprises at least once a year; Involving major hazard sources, entrust an institution with safety evaluation qualification to conduct safety evaluation on major hazard sources, register and file in time, and regularly organize the testing of process parameters, hazardous substances, hazardous energy and safety equipment of major hazard sources; solid
Before carrying out new construction, reconstruction and expansion projects and dangerous operations such as hot work, blasting, lifting and welding, safety risk assessment must be carried out, the types and degrees of existing accident risks must be carefully analyzed, and targeted control measures such as engineering technology, enhanced management, education and training, and personal protection should be taken to prevent accidents.
9. Strictly implement the occupational safety and health management system, incorporate the prevention and control of occupational hazards into the annual work plan of safety production, clarify the responsibilities of the person in charge, safety management personnel and related personnel, strengthen the monitoring and control of occupational hazards in the workplace, issue qualified protective equipment to each person exposed to drugs, strictly implement the pre-post, in-post and post-post physical examinations of drug-exposed personnel, and establish occupational health monitoring files for all relevant employees.
10. Strengthen the monitoring and inspection of dangerous points, designate special personnel to be responsible for the storage and installation of inflammable and explosive articles (warehouses), pressure vessels and pipelines, boiler rooms, power distribution rooms and other dangerous points, and hold relevant certificates after passing the training, strictly implement daily regular inspections and patrols, and handle all kinds of abnormal situations in time to ensure effective monitoring.
1 1. Strengthen the management of equipment and facilities, strictly formulate the annual maintenance plan of equipment and facilities, and carry out maintenance on time to ensure that the inspection rate on time reaches 100% and that the equipment and facilities are in good operation. Increase investment in safety funds, equip facilities and equipment to meet the needs of safety production, and ensure that the equipment prohibited or eliminated by the state is not used, the service life is not exceeded, and the equipment is not allowed to run with diseases.
12. Strengthen the on-site safety management of production and business activities, implement the on-site handover system for enterprise leaders and managers for dangerous operations, and resolutely correct the phenomena of "three violations" and "three excesses". When the on-site shift leader and safety management personnel (including workshop director and team leader) find that the danger cannot guarantee safety, they have the right to issue personnel.
An order to evacuate; Under severe weather such as heavy snowfall, heavy rainfall, strong lightning, ultra-low temperature, ultra-high temperature and strong wind. , designate a person to be responsible for the affected parts and facilities that are prone to accidents. Once danger is found, evacuate people immediately and take decisive action.
13. Strengthen the work of the accident emergency rescue department, constantly improve the emergency rescue plan, implement the emergency rescue organization, equipment and equipment, clarify the emergency rescue procedures and specific matters to every leader and safety management personnel, and implement them to every front-line employee to ensure that an accident emergency rescue drill is organized every year.
Fourteen. Strengthen the standardization construction of safety production, strictly follow the national "General Specification for Safety Production Standardization System" and professional standards and norms, and seriously organize and carry out safety production standardization activities, so as to achieve post standards, professional standards and comprehensive standards.
Fifteen. Strictly implement the accident reporting system. In case of any production safety accident, make sure to arrive at the scene of the accident at the first time, organize and direct the accident rescue work, and report it immediately according to the specified requirements, so as not to report it late, conceal it or make a false report.
Sixteen, according to the provisions of the full extraction of security costs, earmarking; Participate in industrial injury insurance according to law and pay insurance premiums for all employees; In case of production safety accidents, pay the casualties in full and on time in strict accordance with the standards stipulated by the State Council, and do a good job in stability and rehabilitation.
Seventeen. Ensure to perform other safety production duties stipulated by laws and regulations. In case of violating the above commitments and causing production safety accidents, I and the relevant person in charge are willing to accept the following penalties:
(a) the general accident to accept a fine of 30% of the annual income;
(two) to accept a fine of 40% of the previous year's income for major accidents;
(three) major accidents to accept a fine of 60% of the annual income;
(four) to accept a fine of 80% of the previous year's income for particularly serious accidents. At the same time, accept the corresponding disciplinary and administrative sanctions, as well as the punishment made by the relevant departments to suspend or revoke the professional qualifications and post certificates related to safety production; If it constitutes a crime, it shall be subject to corresponding criminal punishment.
This unit is willing to accept the following penalties:
(1) Accepting a fine of 654.38+10,000 yuan but not more than 200,000 yuan for general accidents;
(two) to accept a fine of 200 thousand yuan and 500 thousand yuan for major accidents;
(three) major accidents to accept a fine of 500 thousand yuan and 2 million yuan;
(4) Accepting a fine of more than 2 million yuan and less than 5 million yuan for a particularly serious accident; At the same time, accept the punishment of withholding or revoking relevant licenses made by relevant departments.
If there are serious illegal acts such as failing to report the accident truthfully according to law or obstructing or refusing the investigation and handling of the accident, the unit shall be fined from 6,543,800 yuan to 5 million yuan. I and the relevant person in charge accept a fine of 60% to 100% of the previous year's income; Accept the corresponding disciplinary action; If it constitutes a crime, it shall be subject to corresponding criminal punishment.
Commitment unit (seal):
Signature of legal representative:
20xx 65438+ 10 month 12