Before measuring the wooden door, we need to level the ground. You should know that there may be a few centimeters difference between the cement floor after leveling and before leveling, so the measurement of wooden doors will be inaccurate. Therefore, the wooden door must be measured after the wall is bricked. We can make a table and fill in the measured values one by one, which is clear at a glance and not easy to make mistakes. Let's introduce the format of wooden door measurement form.

1. Wooden door measurement method in wooden door measurement table format

Before measuring the wooden door, level the ground and determine the thickness of the floor material. When measuring wooden doors, it is generally measured by professionals. Surveyors need to use professional measuring ruler and record data. After the measurement, they need to check and sign for the user. The specific method of wooden door measurement is:

1. Measurement of doorways: The width, height and wall thickness of doorways should be measured. The width of the doorway is the distance from left to right, the height of the doorway is the distance from top to bottom, and the thickness of the wall should be measured horizontally, and the maximum value is taken as the thickness of the wall.

2. Measurement of door leaf: The width, height and thickness of door leaf should be measured. The width of the door leaf is the empty distance in the horizontal frame, and the height is the empty distance in the door frame, while the thickness of the door leaf is generally around 38mm or 45mm, which needs to be matched with the door frame. It should be noted that the wooden door should be measured three times, in the order of left, middle and right, so that the result is the most accurate. The order of door and floor installation is generally to install the door first, and then install the floor.

Second, the wooden door measurement notice adopts the form of wooden door measurement sheet.

Wooden doors have high requirements for the door opening. In order to reduce the actual ordering cost of consumers, it is necessary to measure the data of the door opening. Regular brands will classify the width, height and wall thickness of the hole into the standard combination size. Matters needing attention in the process of wooden door measurement are:

1. Surveyors put forward corresponding rectification requirements according to the hole size measured on site, and customers determine the production and installation of products.

2. Wooden door measurement requires that the doorway is vertical, the wall surface is not inclined, and the thickness of the left and right wall battlements is consistent, above the same vertical end face.

3. Different series of doors have different structural dimensions, so we should pay attention to the boundary position of different materials when measuring to avoid exposing different materials on the ground where the door leaves the land.

4. If the thickness, width or height of the customer's blank wall does not conform to the standard combination size, it needs to be rebuilt, so the accuracy of wooden door measurement is very important to avoid the successful installation of the finished door.

Third, the wooden door measurement form wooden door measurement conditions

The floors of newly acquired houses are generally uneven, and there are some dimensional errors, so you should measure the size before making doors, and then measure the floors and tiles. Now wooden doors are generally filled with styrofoam, so the thickness of the wall is very high. Therefore, the wooden door needs to be leveled before installation, and then the wooden door can be measured, so that the data obtained is more accurate. Wooden door measurement needs to meet the following conditions for consumers' reference:

1. The customer and the person in charge of construction must be at the survey site.

2, hydropower transformation and wall reconstruction must complete the wooden door measurement.

3. Horizontal lines are available, kitchen and bathroom walls and floor tiles need to be paved, and the halls need to be leveled.

4, determine the flat wall to increase battlements.

5, after the measurement must be signed by three parties.

The above is the measurement method, matters needing attention and measurement conditions in the wooden door measurement form. The measured value of wooden door should be accurate, otherwise it will affect the later installation and use. The measurement of wooden doors is conditional, and it is best to carry out field operation by professionals and make changes according to the actual situation.