Du 'an Fire Network replied:

According to the investigation, among the causes of fire accidents in various places, the damage and imperfect equipment of fire fighting equipment account for a great reason. Therefore, the focus of fire prevention is to improve the equipment and maintenance of fire fighting equipment products. If you are not familiar with the size of fire fighting equipment.

Maintenance, I suggest you read the article "Common Fire Equipment and Maintenance of Fire Equipment".

In the communication room, due to the particularity of some equipment, it is necessary to set up automatic fire alarm and automatic gas fire extinguishing system. Small communication rooms and other centralized rooms should be equipped with small automatic alarm fire extinguishers, without rain, and indoor fire water supply system should be installed as required.

According to the Code for Design of Fire Extinguishers in Buildings, the communication room should be equipped with a reasonable number of hand-pushed 4KE 25-50KE cart fire extinguishers.

Personnel who maintain automatic fire alarm system and automatic fire extinguishing system must hold relevant certificates and receive professional training in the system.

For the fire safety of communication room, we should not only pay attention to the maintenance and configuration of fire equipment products, but also have strict fire safety rules and regulations. Computer room staff should also have basic fire safety knowledge, including basic fire fighting, self-help and escape skills.

Perfecting fire equipment products is the focus of fire prevention in communication room, and this view hopes to attract everyone's attention.

For more detailed information about "Key Points of Fire Prevention in Communication Room", please refer to this article:

2. What are the fire protection requirements for the telecom room?

Fire safety regulations of communication room 1 Personnel unrelated to maintenance, emergency repair, fault handling, engineering construction and survey and design are strictly prohibited from entering the computer room; Second, it is forbidden for anyone to smoke, use naked flames, use electric furnaces and other high-power electric heating equipment in the computer room; Three, air conditioning maintenance process must use a torch to use open flame, must be far away from equipment, steam bottles and other flammable and explosive items, to ensure good ventilation in the computer room, at the same time to check whether the fire extinguisher can be used normally, so that in case of accidental fire can be controlled and extinguished in time; Four, it is strictly prohibited to smoke when air conditioning maintenance (including outdoor machine maintenance). Before using the air-conditioning welding torch, the refrigerant in the pipeline must be evacuated (or evacuated), and the welding work can only be carried out on the premise of good ventilation and complete dissipation of the evacuated refrigerant; Five, air conditioning refrigerant in storage, should be stored in a cool, ventilated warehouse, not mixed with oxidant products, away from fire and heat sources, must be filled by professionals; Six, when generating electricity, the oil engine must be far away from the engine room and placed in a ventilated place to ensure the smooth intake and exhaust of the oil engine, and at the same time to prevent the accidental combustion of the oil engine from causing personal or property losses to the engine room and surrounding residents; Seven, it is forbidden to pile up debris in the computer room, construction waste must be cleaned up as required, and the holes are blocked with fireproof mud. Flammable materials such as foam, plastic and paper are prohibited.

3. What are the fire protection requirements of the telecom room?

Fire safety regulations for communication room

1. Personnel unrelated to maintenance, emergency repair, fault handling, engineering construction and survey and design are strictly prohibited from entering the computer room;

Second, it is forbidden for anyone to smoke, use naked flames, use electric furnaces and other high-power electric heating equipment in the computer room; Three, air conditioning maintenance process must use a torch to use open flame, must be far away from equipment, steam bottles and other flammable and explosive items, to ensure good ventilation in the computer room, at the same time to check whether the fire extinguisher can be used normally, so that in case of accidental fire can be controlled and extinguished in time;

Four, it is strictly prohibited to smoke when air conditioning maintenance (including outdoor machine maintenance). Before using the air-conditioning welding torch, the refrigerant in the pipeline must be evacuated (or evacuated), and the welding work can only be carried out on the premise of good ventilation and complete dissipation of the evacuated refrigerant;

Five, air conditioning refrigerant in storage, should be stored in a cool, ventilated warehouse, not mixed with oxidant products, away from fire and heat sources, must be filled by professionals;

Six, when generating electricity, the oil engine must be far away from the engine room and placed in a ventilated place to ensure the smooth intake and exhaust of the oil engine, and at the same time to prevent the accidental combustion of the oil engine from causing personal or property losses to the engine room and surrounding residents;

Seven, it is forbidden to pile up debris in the computer room, construction waste must be cleaned up as required, and the holes are blocked with fireproof mud. Flammable materials such as foam, plastic and paper are prohibited.

4. What are the rules for fire prevention in the computer room?

According to the Safety Management System for Mobile Communication Computer Rooms (Fire Prevention), there are the following provisions for computer room fire prevention: 1. Seventh according to different parts of the computer room, different situations, establish and improve the fire safety system and measures, and earnestly implement; 2, article 8 often organize mobile communication room, accounting center, customer service center and base station for fire safety self-inspection and rectification.

Inspection contents: mainly focus on whether the fire fighting facilities and power supply in the computer room are standardized, whether there is overload operation, whether the house leaks rain, whether the air conditioning drainage pipe leaks water, etc. , at least once a month, and timely rectification of security risks found in the inspection. 3. Article 9 The mobile communication computer room shall set up a voluntary fire brigade according to the proportion of employees 100%, that is, all employees in the computer room are members of the company's voluntary fire brigade.

4. Article 10 pays special attention to fire prevention publicity and education, popularizes the basic knowledge of fire prevention, improves the fire prevention awareness of all employees, and enhances the self-prevention and self-rescue ability. 5. Article 21: Automatic fire alarm devices must be installed in communication machine rooms, and fixed fire extinguishing devices should be installed in important machine rooms and unattended machine rooms; 6, article 22 of the regular monthly inspection, maintenance, maintenance alarm fire fighting equipment, make it always in normal operation.

7, article 23 automatic fire alarm equipment and fire extinguishing equipment must be set on duty, to ensure continuous boot operation, found that the fault report in time. Extended data:

Flammable and combustible liquids shall not be stored in the fire-proof (1) machine room.

When it is necessary to store a small amount of flammable and combustible liquids that must be used in production in adjacent rooms, the storage amount should be strictly limited. It is forbidden to use flammable liquid to wipe the floor in the computer room.

(2) Do not operate cleaning equipment in the machine room. When wiping the contacts with a small amount of flammable liquid such as gasoline in the machine room, it should be done when the equipment is not charged.

If the equipment is charged during wiping, reliable fire prevention measures should be taken. Plastic bottles should be used to hold gasoline to prevent large use.

The iron part of the brush used should be tightly wrapped with insulating material to prevent short circuit ignition on the equipment and cause gasoline to catch fire. (3) Minimize combustible materials in the machine room.

Mop, broom, floor wax, etc. It should be placed in a fixed and safe place. Smoking is strictly prohibited in the computer room.

Inflammable materials such as paper strips and paper shall not be stacked near or below electrical switches, plug-in fuses and sockets, nor near motors and power cords. (4) The protection devices and alarm devices of various communication equipment should be sensitive and reliable, and should be checked and maintained frequently.