12 On February 6th, the company issued the Notice on Launching the Solicitation of Rationalization Suggestions for Safety Production, and extensively launched the Solicitation of Rationalization Suggestions for Safety Production throughout the company. As of June 6th, 12, * * * has 1 1 units in exquisite companies, elite companies and elite companies.
The rationalization proposals reported by each unit are arranged as follows:
First, the company has problems in safety management:
1, strengthen the leadership safety responsibility system, who is in charge and who is responsible? Put an end to some leaders and workers, work depends on experience, management depends on feeling, and old ideas can't keep up with management.
2, superior leadership inspection and guidance, subordinates are often busy with, did not solve the actual safety problems.
3, safety management accounting is not standardized, should be published regularly according to the standard and check in time. Management personnel shall supervise and inspect the missing items, and Qin Ying shall inspect them, and more safety signs and warning signs shall be added in key parts to strengthen safety inspection.
4, must adhere to the safety education system for new employees and outsiders, and strictly hold relevant certificates.
5. Due to the shortage of production tasks in the near future, employees' thoughts are unstable, management is difficult, and accidents are prone to occur. It is suggested to strengthen employee safety education, increase production tasks, strengthen safety production inspection, and do a good job in employees' ideological work in time.
6. Do a good job in quality supervision and review. Unqualified products should be scrapped in time. If it can't be repaired, it will be supplied to customers as a good product, which will affect the overall image of the company (except those that can be repaired but will not affect the overall performance of the product).
7. Strictly regulate the incoming inspection of products, and prevent a nonconforming product from entering the finished product warehouse. If there are burrs in the inner cavity of the product, left screws, unstable plug-in assembly, messy wiring, incorrect connection, etc., if quality accidents are found, hell to pay should be punished in time and the reasons should be investigated. The responsibility lies with people, and the phenomenon of mutual shirking should be resolutely resisted.
8, the company's labor discipline is relatively loose, the door in and out of unattended, workers in the workshop thinking about things at home, to strengthen labor discipline, strict factory rules and regulations, strengthen the management of factory guards and other personnel, can not relax after three days.
9. Refine production process, improve technology, reduce procurement and manufacturing costs, optimize workflow, simplify production and improve production efficiency. Timely understand the information of similar products in the industry, timely capture marketable products, strengthen cooperation with universities and scientific research institutions, and produce life-saving equipment urgently needed in coal mines.
Second, the safety hazards existing in the work site and the problems to be solved
1. Workers' labor protection clothing is not uniform and tidy, and some workshop workers' work clothes are missing, so they need to buy new work clothes.
2. The items in the dressing room of the workshop are not arranged neatly, and the processed parts in the workplace are placed in confusion, and the process is unknown, so the road cannot be unblocked, which affects the safety in production.
3. Some employees have fluky psychology in their work, and the performance of doing things by experience is serious.
4. Freshmen have reorganized their theoretical knowledge, but they lack practical work experience. Some new employees don't listen to management, so safety education should be strengthened.
5. Due to the cold weather, the heating equipment of the workers in the office and locker room of the workshop is messy, which is easy to cause fire. It is suggested that the company purchase heating equipment in a unified way, and each office and locker room has a special person responsible for heating equipment, and turn off the heating equipment in time.
7. Machine tool operators have no habit of checking equipment before starting, so ten kinds of education must be strengthened before class.
8. Some workshops, oil drums and other flammable items are stored in workshops, but not in designated safe places.
9. Some employees wear gloves and use hammers, which is against the regulations? Three violations? It is stipulated that education in this field should be established.
10. The assistant manager did not wear protective equipment in time when he got off the workshop, and the assistant manager did not distribute protective equipment, which brought safety hazards to production. Please purchase as planned.
1 1. Some crane drivers hoist the processed parts when the signal is unknown, which is a serious violation of the three violations.
15, the company's carport is often damaged by people's carports and vehicles.
17, the company's organs, including the quality assurance department, are still using wooden switchboards and knives that are explicitly prohibited by the state. The production workshop has been rebuilt, and the authorities should rectify it as soon as possible to eliminate hidden dangers.
2 1. Strengthen equipment maintenance and repair to ensure that the equipment is always in a safe state.
22, strengthen the management of the experimental area, strengthen the access management of operators and personnel in and out of the experimental area, strict examination.
23. Catch in winter? Three violations? When operating the rotating machine tool, special attention should be paid to wearing gloves and heating without a license.
Three. Problems existing in employee safety education
1. In the past, there were few safety activities in the factory, and employees knew little about safety knowledge. I hope to invite relevant safety experts to give lectures, just like the last performance.
2. Employees' safety education should be continuously strengthened. Some employees do not pay attention to safety work, cope with inspections, and have poor safety awareness. Professional training should be strengthened, and there should be no multi-functional unprofessional phenomenon. Moreover, the investment in safety education is very small, which has not attracted the attention of company leaders.
3. Strengthen publicity and education, timely supervise the safety learning situation of all units, focus on checking the safety management records of grass-roots workshops, and urge grass-roots units to do a good job in safety production education, especially one case a week and one question a day. Intensify safety inspection and persevere.
4, cadres should often go to the workshop for safety guidance, more interaction with employees to carry out safety education, not just theoretical study without interactive links, to establish a sense of three violations in the hearts of employees, grasp the importance of three violations, three violations governance and other related documents should be implemented for a long time, can not be interrupted.
5. I hope to broadcast the knowledge about safe production every day, and broadcast one or two contents every week. The safety management department will sort out the safety accident cases of each unit over the years, analyze the reasons and make them into CDs as vivid teaching materials for training employees and safety education.
Fourth, how to do it well? Three violations?
1, check regularly and make records, strengthen the standardized management of the system, give full play to the role of safety officers, adhere to safety education, do a good job in the joint insurance system, and do not follow the form. Three violations? Employees will be rewarded and violations will be punished. Three violations? Standardized employees are punished, not to mention human feelings and systems.
2. Some workshops are aging, the environment is poor, and the heating facilities are incomplete, which will lead employees to use all kinds of heating equipment privately. Strengthening the fire safety education of employees in winter should start with humanized management.
The factory is an old factory with a history of several decades. The factory building is in disrepair for a long time, and the equipment is seriously aging. To establish a system of equipment inspection, there should be a special person to check the operation of the equipment and the operation of the operators every day to avoid accidents.
4, doors and windows glass damage is too much, should be installed in time, to do a good job of winter cold and warm.
Suggestions and opinions on safe working mode Article 2 District and county people's governments, municipal government departments and directly affiliated institutions:
On June 10 this year, a particularly serious fire accident occurred in Chaonan District, causing particularly heavy casualties and huge economic losses, which had a great negative impact on society. For deep absorption? 6? 10? By analogy, we will quickly implement strong rectification measures, further strengthen safety production and fire safety work, resolutely curb the occurrence of serious accidents and mass casualties, ensure the safety of people's lives and property, and create a good safe production and living environment for the city's economic and social development. Through discussion at the thirty-ninth executive meeting of the municipal government, we hereby put forward the following opinions:
First, fully understand the extreme importance of safety production and put safety production on the important agenda of governments at all levels.
? 6? 10? This particularly serious fire accident revealed that we underestimated the outstanding problems and grim situation of current safety production, failed to properly handle the relationship between safety and production, safety and efficiency, safety and stability, and safety and development, and are implementing it? Safety first, prevention first? In terms of policy, failed to put? Prevention? Really put it in the first place, effectively eliminate the hidden dangers of major accidents, and do a good job in all basic work.
Safety in production is directly related to the safety of people's lives and property and the overall situation of reform, development and stability. We must fully understand the extreme importance of safe production and take it as a practice? Theory of Three Represents theory? Being in power for the people is an important measure to speed up economic development and build a harmonious society. Its important content is to truly realize the goals of thought, leadership, organization, responsibility, measures, law enforcement, investment and publicity, so as to ensure safe production. It is necessary to firmly establish the concept of people-oriented and ruling for the people, the concept that safe production has only a starting point but no end point, the sense of hardship in times of peace, resolutely correct the wrong tendency of attaching importance to development and neglecting safe production, and correctly handle the relationship between economic development and safe production; Correct the tendency of emphasizing examination and approval over management, and focus on solving the problem of inadequate supervision; Correct the erroneous tendency of compartmentalization and lax law enforcement, strictly administer according to law, and ensure the smooth implementation of government decrees; Correct the bureaucracy of floating style, engaging in formality and going through the motions, and implement the responsibility system for safety production and fire prevention at the grassroots level, enterprises and people; Correct the wrong tendency that safety production and fire safety have nothing to do with themselves, and firmly establish the idea that everyone is responsible for safety production and fire safety; Correct the wrong ideological tendency of being complacent and lax, and firmly establish the idea of unremitting efforts in safety production and fire safety; Correct the wrong tendency of one-sided emphasis on objective difficulties and increase investment in public safety facilities; Correct the wrong ideological tendency of attaching importance to production and operation and neglecting the construction of safety facilities, and strive to enhance the safety prevention ability of enterprises.
We should take safety in production as a concrete measure to establish and implement Scientific Outlook on Development's correct outlook on political achievements, as an important standard to test and implement Scientific Outlook on Development's correct outlook on political achievements, put safety in production throughout the whole process of economic and social development, put it in the same important position as economic and social development, put it on the important agenda of governments at all levels, and incorporate it into the economic and social development planning and index assessment system. Synchronize planning, synchronous research, synchronous deployment, synchronous implementation and synchronous assessment with economic development, truly achieve the unity of safety and development, safety and production, safety and social harmony, and ensure the implementation of safety production.
Two, improve the organization, fully implement the responsibility system for production safety and fire safety, and strictly implement the accountability system.
1, strengthen the supervision and management of production safety. Cities, districts and counties set up a separate safety production supervision and management bureau, as the working department of the government at the same level in charge of comprehensive supervision and management of safety production, and perform the functions of comprehensive supervision and administrative law enforcement of safety production. Integrate the functions of the municipal, district and county governments responsible for the supervision and inspection, administrative punishment and administrative law enforcement of the safety production supervision and management departments, and set up the administrative law enforcement agencies of the municipal, district and county safety production.
2. Adhere to safe production? Territorial management? Principle, adhere to the shift of center of gravity, the combination of blocks, with blocks as the main. All organs, organizations, enterprises and institutions in our city must obey the management of the local government and safety supervision and management departments.
Establish a three-level safety inspection system for cities, counties and towns (streets). Governments at all levels and departments responsible for safety supervision should implement the provisions of the safety inspection system in our city, and regularly check the key hidden dangers and major hazard sources in this region and this industry (field). Establish a safety inspection team based on the town (street) and industrial park. One enterprise and one file? , the establishment of enterprise safety production file system, and do a good job in enterprise safety production inspection records.
3, fully implement the responsibility system for production safety and fire safety. In addition to continuing to sign letters of responsibility with the departments responsible for the supervision and administration of production safety in all districts, counties and cities, the municipal government will also sign letters of responsibility with the member units and directly affiliated institutions of the municipal government, forming a situation in which the whole society pays close attention to * * *. On the basis of signing the responsibility book for safety production and fire safety step by step, the contents of the responsibility book are detailed one by one and implemented well. Is it really necessary to grasp the truth, supervise the truth, urge the truth, grasp the first level, implement it layer by layer, and strive to build it? Unified leadership of the government, supervision by departments according to law, overall responsibility of enterprises, participation of the masses in supervision, and wide support from the society? Work mode of safe production. Leaders of governments at all levels and functional departments should often go deep into the grassroots, carry out investigations and studies, grasp the first-hand situation of safety production at the grassroots level, deeply understand the problems and difficulties faced by the grassroots, and give targeted guidance and help.
Seriously implement leaders at all levels? One post and two jobs? Responsibility system for safe production. The main person in charge of governments at all levels and their relevant departments is the first person responsible for production safety, and takes overall leadership responsibility for production safety in their own regions, departments, systems and industries; The person in charge of each job shall be responsible for production safety within the scope of his business responsibilities. The main person in charge of governments at all levels and relevant departments shall regularly preside over or entrust the person in charge to preside over the regular meeting of production safety, analyze, study and solve major problems related to production safety in their respective regions and departments.
4, the implementation of enterprise safety production responsibility. Focus on enterprises and implement enterprises? Self-inspection of safety, self-correction of hidden dangers and self-responsibility? . Supervise and help enterprises to improve the organization, management system and operation procedures of safety production management, equip registered safety officers and safety production management personnel according to law, establish and improve the management system of enterprise safety production files, and improve the safety management level of enterprises. Guide and urge enterprises to effectively implement safety equipment and facilities for engineering construction projects? Three at once? (design, construct, put into production and use at the same time with the main project) system to ensure that the enterprise meets the statutory conditions for safe production.
5. Establish a safety production and fire emergency rescue system. Strengthen the awareness of safety early warning and prevention, and establish an emergency rescue system for governments at all levels and related industries. On the basis of fully integrating and utilizing the original emergency rescue resources, we will further strengthen the construction of professional rescue teams with rapid response capabilities, improve the level of rescue equipment and strengthen emergency rescue drills. Focus on speeding up the formulation of emergency rescue plans for accident-prone areas and key units such as dangerous chemicals, construction, crowded places and major hazard sources such as Huangcuowei.
6, make full use of the existing e-government network platform, speed up the construction of production safety information network in cities and counties, and provide an information technology platform for statistical analysis of production safety accidents, monitoring and supervision of major hazard sources and major accident hazards, dynamic analysis of safety status of enterprises in high-risk industries and accident prevention and prediction.
7, implement the system of administrative responsibility for safety accidents. Where serious production safety accidents occur, according to? Territorial management? And then what? Who permits, who is in charge? 、? Who's in charge? Who's in charge? In principle, in accordance with the laws and regulations on production safety, the main leaders of local governments (or government agencies), the leaders in charge and the main leaders of industry departments shall be held accountable. The municipal government will formulate measures for the investigation of administrative responsibility for major safety accidents in our city according to the relevant provisions of "Provisions of the State Council on Investigating Administrative Responsibility for Major Safety Accidents", "Provisions on Investigating Administrative Responsibility for Major Safety Accidents in Guangdong Province" and "Decision of Guangdong Provincial People's Government on Further Strengthening Work Safety".
8, the implementation of administrative licensing accountability system. According to the relevant provisions of "Provisions of the State Council on the Investigation of Administrative Responsibility for Extraordinary Safety Accidents" and "Decision of Guangdong Provincial People's Government on Further Strengthening Work Safety", all relevant departments shall not examine and approve administrative licensing matters (including examination and approval, approval, licensing, registration, certification, issuance of licenses, completion acceptance, etc.). ) involving safety in production and fire control, which does not meet the safety conditions stipulated by laws, regulations and rules; Units and individuals that have obtained approval in accordance with regulations, failed to carry out strict supervision and inspection, or failed to immediately revoke the original approval when they found that they no longer meet the safety conditions, or failed to obtain approval to engage in related activities in accordance with the law when they were found or reported, and failed to seal up, ban or give administrative punishment according to law, shall not revoke their business licenses. According to the seriousness of the case, the main person in charge of the department shall be given administrative sanctions of demotion or dismissal; Those who constitute the crime of accepting bribes, dereliction of duty or other crimes shall be investigated for criminal responsibility according to law.
Three, grasp the key points, break through the difficulties, and carry out in-depth law enforcement inspection of production safety and special rectification of fire safety.
1, focusing on hotels, restaurants, hospitals, schools, entertainment places, shopping malls and other crowded places, key hazards and? Village in the city? Supervise, resolutely ban underground processing plants and workshops, and resolutely eliminate them? Three in one? 、? Two in one? Enterprises and shops, resolutely dismantle illegal buildings; Carry out road and water traffic safety inspection; Conduct a comprehensive inspection of all aspects of the production, management, storage, transportation, use and disposal of hazardous chemicals; Carry out safety inspection in construction, railway, electric power, machinery, textile, fishery, water conservancy and other industries. Enterprises whose safety conditions are not up to standard and illegally produced shall be resolutely ordered to rectify; Units and enterprises that fail to implement the rectification measures and have many hidden dangers should be listed and supervised, and the relevant units and enterprises should be instructed to implement the responsible person, rectification period and rectification scope; Those who fail to pass the rectification will be resolutely suspended according to law and will never be soft.
2. Take half a year to carry out a new round of fire hazard investigation and rectification. Carry out a special rectification of the installation, use and management of electrical equipment and a safety inspection of building decoration materials. For units with serious fire hazards, rectification, relocation, closure and suspension will never be soft. Governments at all levels should implement a listing supervision system for key fire hazard units. Units and personnel responsible for all kinds of accidents should follow the? Four don't let go? Principle, seriously investigate and deal with it, and check it to the end. Dereliction of duty, dereliction of duty, dereliction of duty and corruption in the process of law enforcement supervision must be resolutely investigated and dealt with according to law.
All functional departments should close the fire source of construction projects according to law. Construction projects and decoration projects that have not passed the fire protection design review and fire protection acceptance shall not be constructed or put into use. Public gathering places shall not be opened or put into use without passing the fire safety inspection.
Four, strengthen planning, increase investment, and effectively strengthen the safety production and fire protection infrastructure.
1. Strengthen planning, and organize the preparation of special safety production planning according to the overall urban planning; Revise and improve the special fire protection planning at the city, district and town levels. Before the end of the year, Chaoyang, Chaonan, Chenghai and Nan 'ao counties, as well as key towns and central towns that have compiled the overall urban planning, should complete the preparation of fire protection planning; Special plans for industry, commerce and trade should also have corresponding contents and measures for safety in production and fire control.
2, increase investment in production safety and fire protection, special funds for production safety and fire protection funds will be included in the fiscal budget. Every year, governments at all levels arrange special funds for expenditures such as safety production infrastructure, safety production informatization, support system, emergency rescue equipment, safety production publicity and education training, safety production science and technology project construction, rectification of key accident hidden dangers and monitoring of major hazard sources. Through financial and other channels, raise funds from various sources, speed up the pace of public fire control facilities construction and fire control equipment allocation, and improve the level of public fire control facilities construction and fire control equipment. Guide enterprises to increase investment in the construction of supporting facilities for safe production. Strengthen the construction of fire control organizations such as full-time fire brigades and voluntary fire brigades. If the GDP reaches 654.38+0 billion yuan or the population reaches 654.38+0 million yuan, the town (street) shall establish a full-time fire brigade in stages according to the unified deployment of the city, district (county).
Five, strengthen publicity, education and training, improve the safety awareness and safety knowledge and skills of the whole people.
From now until the end of this year, publicity and education activities on production safety and fire safety will be carried out throughout the city.
1, using newspapers, television, radio, internet and other media, regularly publicize the national guidelines, policies, laws and regulations and major measures related to fire safety and production safety, and guide the masses to establish? Everyone is responsible for production safety? Idea, strive to build everyone? Care about life safety? Good social atmosphere.
2. Carry out safety education in communities, enterprises, schools and rural areas. Television and newspapers set up columns. Departments of public security, fire protection, safety supervision, transportation, construction, environmental protection and education organize training courses and lectures, give face-to-face guidance, conduct targeted publicity, education and training, popularize safety knowledge and accident escape skills, improve coverage and enhance effectiveness. According to the different characteristics of institutions, institutions, crowded places, families and other different levels of units and people, targeted publicity and education activities on safety prevention were carried out.
3, adhere to the training first, then mount guard, strengthen the training and assessment of the main person in charge of the enterprise, registered safety officer, safety production management personnel and special operations personnel. By the end of this year, the training rate of all kinds of employees should reach 100%. The legal representative of the unit, the person in charge of fire safety, management personnel, relevant personnel in special industries and key positions must receive professional fire protection training and hold relevant certificates. Departments responsible for safety supervision should strengthen the training and assessment of the principal responsible persons, registered safety officers, safety production management personnel and special operations personnel of enterprises.
Shantou Municipal People's Government
June 28(th)
Suggestions and opinions on safe working mode Article 3 Safe production is an eternal theme and the basis of all work.
How to ensure the implementation of safety management measures in place, how to improve the safety production management rules and regulations and effectively implement them, how to put the focus of safety work on the front line and move the safety production barrier forward are problems that we need to seriously study and solve at present. In practical work, we found some safety production management? Intermediate obstruction? Phenomenon, with the meeting to implement the meeting, with the document to implement the document, the inspection is not implemented, the assessment is not too hard, so that the safety production management regulations exist in name only. ? Safety first, prevention first? Although the policy has long been a household name, in fact, it is called much, implemented little, shouted loudly and acted slowly. Safety work cannot be done overnight, nor can it be solved by one person's ability. It is restricted by many factors. Only by strengthening the supervision of production process, vigorously standardizing on-site safety measures, strengthening the on-site handling of illegal personnel, constantly standardizing on-site operation behavior, promoting standardized operation, transferring the analysis of safety work to process supervision, and realizing the advance of safety management barrier, are the effective measures to reverse the unsafe situation. Here, I will talk about some views and opinions on how to do a good job in safety production.
1. Strengthening the leadership of safety production is the fundamental guarantee to realize safety production. To do a good job in safety production, we must strengthen the leadership of safety production. Safety management not only emphasizes management to the end, but also emphasizes management in place. Conditioning in place is to sort out the order and straighten out the relationship; It is to constantly improve the code of conduct, inspection system and standards, assessment and reward and punishment methods for safety work. In the end, let? Safety first, prevention first? The policy is deeply rooted in the hearts of the people. We must strictly grasp the thin tube and make a rigid assessment, and we will never tolerate any violations. Always put safety in production in an important position, constantly improve the safety production guarantee system and safety production supervision system, take the full implementation of the safety production responsibility system as the core, improve the safety production laws, regulations and responsibility system as the basis, and implement anti-accident measures, anti-violation and standardization work as the principle, so as to organize implementation, measure implementation, inspection implementation and assessment implementation, and further strengthen the basic work of safety production management.
2. Systematization of safety management, standardization of safety measures and standardization of operation behavior are the basic requirements of safety production management? No rules, no Fiona Fang? Without reasonable and standardized management system and safety measures and unified industry requirements, how to do a good job in safety production? Therefore, it is the most basic requirement for us to constantly improve and refine the safety management system, formulate specific implementation rules and measures, and improve safety management rules and regulations. Some of our business leaders only pay attention to efficiency, not safety. During the inspection, our safety inspectors found that the enterprise did not even have a basic safety system, let alone safety measures and safety education. Only after the accident did they regret it and realize the importance of safety production management. Therefore, in our work of safety in production, enterprises must formulate reasonable, perfect and standardized work systems and measures of safety in production, and stick to them to ensure the implementation and enforcement of these work systems of safety in production. With an effective system, our work in safety production can be standardized, and the due effect can be achieved, so that safety management can be institutionalized and safety measures can be standardized.
Three, do a good job in production safety publicity, pay attention to production safety education, and enhance the safety awareness of the whole people is the premise. Safety in production is closely related to people's daily life. Doing a good job in safety production propaganda, attaching importance to safety education and enhancing the safety awareness of the whole people are the prerequisites. The improvement of the safety awareness of the whole people and the enhancement of the self-protection ability of enterprise employees are the basis for doing a good job in safety production, so that employees can really learn from it? Want me to be safe? Arrive? I want safety? Essential change. Make full use of the opportunity of the annual safety production activity month, do a good job in safety production propaganda, make safety production work a household name, enhance the safety awareness of the whole people, make safety production work deeply rooted in the hearts of the people, and let everyone pay attention to and understand safety.
Four, safety production work focuses on management and supervision in place, safety management and supervision is an important link to ensure safety production, safety work focuses on management and supervision in place, which is an important link to ensure safety production. As the supervisor of safety supervision, it is necessary to find and eliminate hidden dangers in time, correct and investigate violations in time, realize the transformation of safety supervision from ex post supervision to ex post supervision and process supervision, and actively eliminate potential safety hazards in the bud.
How to do a good job in the supervision of production safety in counties and districts, I think we should mainly do the following work:
First, we must do a good job in team building, innovate working methods, and strive to improve the level of safety production supervision. It is necessary to strengthen the construction of safety production supervision team, strive to improve the level of safety supervision under the new situation, and gradually establish and improve an effective safety production supervision system. In accordance with relevant laws and regulations, improve the cooperative, fair and strict law enforcement ability of law enforcement personnel, organize safety production supervision departments to actively participate in training and learning in various ways, and give full play to the organization and coordination role of street communities.
Two, innovative safety supervision work ideas, adhere to the law to ensure safety. Safety work itself is a social system engineering, which is the necessity of human civilization progress and social development. Especially when the society is in a period of rapid development, its security problems are more prominent. Therefore, it is necessary to strengthen government supervision, strengthen the industry supervision function, highlight the enterprise responsibility system, establish and improve the safety work responsibility system, constantly improve the safety production laws and regulations system, establish the legal awareness of administration according to law, public security according to law and safety according to law, and make the safety supervision work move towards the legal and standardized management track.
Third, deepen the special rectification of safety to ensure the effectiveness of governance. It is still a long-term and arduous task to do a good job in the safety rectification of key industries and fields.
Articles related to safety work suggestions and opinions:
1. Comments and suggestions on safety education
2. Suggestions and opinions on safety in production
3. Suggestions on safety management
4. Safety management suggestions
5. Selected safety management suggestions
6. Selected model essays on safety management suggestions