A. Summary of assessment provisions for safety technical training of special operations personnel

Importance of safety, training and management.

There is no model essay.

The following is for reference,

Mainly write down the main work content, how to work hard and the achievements, and finally put forward some rationalization suggestions or new efforts. . . . . . .

Work summary is to let the superior know what contribution you have made and reflect the value of your work.

So you have to write a few points:

1, your understanding of the position and work 2, what did you do specifically?

3. How did you work hard and what things did you solve with your brain? Even if it's nothing, write something difficult. How did you solve it through hard work?

4. What abilities or knowledge do you need to improve in your future work?

5. The superior likes people who take the initiative to work. You should make all the preparations in your work, that is, the preparations in advance are as follows for your reference:

Summary is a comprehensive and systematic overall evaluation and analysis of the situation over a period of time, and analysis of achievements, shortcomings and experiences. Summary is a kind of applied writing, which is a rational thinking about the work that has been done.

Basic requirements of summary

1. Summary must have an overview and a description of the situation, some simple and some detailed.

2. Achievements and shortcomings. This is the main content of the summary. The purpose of summing up is to affirm the achievements and find out the shortcomings. What are the achievements, how big, how to use them and how to achieve them; How many shortcomings there are, what aspects they are manifested in and how they are produced should be clearly written.

3. Lessons learned. In order to facilitate the future work, we must analyze, study and summarize the previous work experience and lessons to form theoretical knowledge.

Summarize the precautions:

1. We must seek truth from facts, the achievements are basically not exaggerated, and the shortcomings are basically not narrowed. This is the basis of analysis and learning lessons.

2. Clear organization. This sentence is fluent and easy to understand.

3. Be detailed and appropriate. There are important things and minor things, so when you write, you should highlight the key points. The problems in the summary should be divided into primary and secondary, detailed.

Basic format of summary:

1, title

2. Text

Introduction: overview, overall evaluation; Summarize the full text.

Subject: analyze the shortcomings of achievements and sum up experiences and lessons.

Conclusion: Analyze the problem and make clear the direction.

Step 3 sign

Signature and date.

B. Why do special operators need certificates?

The reason is to standardize the safety technical training, assessment and certification of special operators, prevent casualties and promote safe production.

Special operations personnel refer to those who are directly engaged in special operations. Because of its relatively high risk factor, the state has very strict requirements on the working conditions of special operators.

C. Safety technical training and assessment system for special operations personnel

Management control procedures for special operators

1 purpose

In order to standardize the safety technical training, assessment and certification management of special operators and promote safety production.

2 Scope of application

Applicable to all special operators in Wu (Huarui Group).

3 responsibility

3. 1 Each employer is responsible for the safety education, internal assessment and management of special operators.

3.2 The Human Resources Department is responsible for organizing:

A) Organize the training, assessment and evidence collection of special operators;

B) Collect laws and regulations related to special operators, and organize the implementation of relevant regulations;

C) Supervise and inspect the use of special operators;

D) Establish the account of special operators in the whole hospital.

3.3 The Human Resources Department is responsible for issuing internal operation certificates for electrician operators and circuit board welding.

4 working procedures

4. 1 Special operators must meet the following basic conditions:

A) At least 65,438+08 years old;

B) Be in good health and free from diseases and physical defects that hinder the operation of the corresponding type of work;

C) Junior high school (including junior high school) or above, with the knowledge of safety technology of corresponding types of work, taking part in the theoretical and practical assessment of safety technology stipulated by the state and passing the assessment;

D) other conditions that meet the requirements of the corresponding job characteristics.

4.2 Training, assessment and certification of special operations personnel

4.2. 1 Special operators must receive special safety technical training suitable for this type of work, and give lectures according to the requirements of the safety technical training outline and assessment standards for this type of work stipulated by the state. Graduates from vocational high schools, technical schools and secondary specialized schools who have received practical skills training can directly participate in the assessment without training.

4.2.2 Training shall be organized by the Human Resources Department in a unified way, and each employer shall put forward requirements at the beginning of each year and incorporate them into the annual training plan of the hospital.

4.2.3 The employing unit shall provide daily safety education to the special operators, and the special operators shall not take up their posts until they have passed the safety technical examination and obtained the special operation certificate.

4.2.4 The safety technical assessment of special operators is divided into theoretical assessment and practical assessment. The specific assessment content shall be implemented in accordance with the Assessment Standard for Safety Technology Training of Special Operators formulated by the State Administration of Work Safety.

4.2.5 Internal evaluation certification and external evaluation certification.

4.2.6 Internal audit and certification. The certificate-issuing personnel for internal assessment are limited to Wuhan Higher People's Court (Huarui Group) with bachelor degree or above in electric power major, and electricians, circuit board welders and human resources departments engaged in the development, design, production, debugging and testing of electrical products are subject to technical assessment by the employing unit. After passing the examination, the human resources department will issue a certificate.

4.2.7 Except for the above-mentioned internal auditors, all the others are external auditors. External assessment and certification refers to entrusting qualified training and assessment institutions to the safety production supervision and management department of Hubei Province for training, and issuing corresponding operation certificates after passing the examination.

4.2.8 Personnel who undertake multiple special operation posts at the same time shall obtain the qualification certificates of corresponding posts and hold relevant certificates.

4.2.9 Employees who have obtained special operation certificates and are engaged in special operations shall go to the Human Resources Department for qualification identification and registration.

4.3 review

4.3. 1 The special operation personnel with the outgoing operation certificate shall be reviewed once every two years and have been engaged in this type of work continuously 10 years or more.

After the employer updates the knowledge, the review time can be extended to once every four years. The contents of the review include:

Health examination;

B) Check the illegal operation records;

C) Education on new knowledge of production safety and accident cases;

D) Safety technical knowledge test for this type of work.

4.3.2 If it passes the review, it shall be signed, registered and confirmed by the reviewing unit; If the review is unqualified, the original review unit may apply.

Please review it again; If the re-inspection is still unqualified or fails to be reviewed on schedule, the special operation certificate is invalid.

4.3.3 Special operators with internal operation certificates shall review 1 time every 2 years, and the content of the review shall be new knowledge of safety production.

Check the rules and regulations of the whole production and post safety operation procedures.

4.3.4 At the beginning of each year, the employing unit shall fill in the "Training Plan for Special Operators" and arrange personnel for re-examination.

4.4 Personnel management

4.4. 1 The employer shall establish the archives and account of the special operations personnel of the unit, fill in the Registration Form of Certified Special Operations Personnel, and report to the Human Resources Department to establish the account of the special operations personnel of the whole hospital.

4.4.2 The employing unit shall do a good job in training, assessment, review, declaration and daily inspection of special operators.

4.4.3 The Human Resources Department shall conduct supervision and inspection, and record any matters that do not conform to the management of special operators.

Supervise its rectification.

4.4.4 If the special operation personnel are re-employed after leaving the special operation post for more than 1 year (or 6 months), an employment form shall be issued.

The actual operation of the second interview, confirmed qualified rear can mount guard.

4.5 The expenses for training, assessment and review of special operations personnel shall be paid by the employer.

5 Relevant supporting documents

5. 1 Record control program

6 record

6. 1 Training plan for special operators

6.2 special operations personnel certified registration form

D. Why should safety training be given to workers working at high altitude?

In order to ensure the professionalism of employees and the safety in the construction process, aerial work personnel must obtain aerial work certificates issued by state administration of work safety unified production, provincial safety production supervision and management departments and coal mine safety supervision institutions. The special operation certificate is common in China. The operation certificate for special operations shall not be forged, altered, lent or transferred.

Special operations personnel must receive special safety technical training suitable for this type of work, pass the theoretical examination of safety technology and the examination of practical operation skills, and obtain the operation certificate of special operations before taking up their posts; Those who have not been trained or failed the training examination shall not be allowed to work at their posts.

The training and examination of special operations personnel shall be subject to the system of separation of teaching and examination, and the State Administration of Work Safety shall be responsible for organizing the formulation of training syllabus and examination standards for special operations personnel, and recommending the use of teaching materials. Training institutions shall organize training in accordance with the training syllabus formulated by the National Bureau and the recommended teaching materials. Provincial safety production supervision and management departments, coal mine safety supervision institutions or qualified units entrusted by them shall organize the assessment according to the assessment standards formulated by the State Council.

The aerial work permit shall be reviewed once every two years by the original examination and certification department. If an employee has worked in this type of work for more than 10 years, the review time can be extended to once every four years after the employer updates its knowledge. Special operators of trans-regional practitioners or trans-regional mobile construction units may apply for a review to the assessment and certification unit where their practitioners or construction sites are located.

Special operation certificate is also called special operation IC card.

E. Management Rules for Safety Technical Training and Assessment of Special Operations Personnel

Management Regulations on Safety Technical Training and Assessment of Special Operations Personnel 20 10070 1

Management Rules for Training and Examination of Special Equipment Operators 200 1 122 1

Supervision and management office of special equipment operators 2005070 1

There is a pool in the Quality Supervision Bureau of the Safety Supervision Bureau.

F. What is the function of electrician's special operation certificate?

The function of electrician special operation certificate is that the holder can engage in electrician work.

According to the relevant documents of the State Administration of Work Safety, special operations refer to operations that are prone to casualties and may cause great harm to the safety of operators, others and surrounding facilities. Personnel directly engaged in special operations are called special operations personnel.

It is precisely because of the above reasons that special operators must receive special safety technical training suitable for this type of work, pass the theoretical examination of safety technology and the examination of practical operation skills, and obtain the operation certificate of special operations before they can take up their posts. Those who have not been trained or failed the training examination shall not be allowed to work at their posts.

Electrician's special operation certificate is a special operation certificate issued by the safety supervision department, which proves that the holder can carry out electrician operation after safety training. If an accident occurs, it can be handled according to improper operation or violation of operating rules, which can reduce the punishment and treatment severity caused by special operation accidents. If you don't have this certificate, once you find it, you can stop the special equipment, order the person to go to training and collect evidence, and you can also fine1-30,000 yuan.

Holders of electrician's special operation certificate can apply for electrical maintenance. During the safety inspection, you can show the electrician's special operation certificate, which shows that you are qualified for electrical maintenance.

(6) The purpose of special operation training is to expand reading:

Electrician operation

Refers to the operation, maintenance, installation, overhaul, transformation, construction and debugging of electrical equipment.

1, high-voltage electricity industry

It refers to the operation, maintenance, installation, overhaul, transformation, construction, debugging, test and detection of high-voltage electrical equipment with 1 kV and above.

2, low voltage electrician operation

Refers to the installation, debugging, operation, maintenance, overhaul, transformation and test of low-voltage electrical equipment below 1 kV.

3. Explosion-proof electrical operation

Refers to the installation, overhaul and maintenance of various explosion-proof electrical equipment.

It is suitable for explosion-proof electrical operation except underground coal mine.

Personnel conditions

1, at least 18 years old, and not exceeding the national statutory retirement age;

2, with a junior high school education (hazardous chemicals special operations personnel should have a high school education or equivalent);

3, good health, no hypertension, heart disease, epilepsy, dizziness and other diseases and physical defects that hinder this operation;

4. Have the necessary safety technical knowledge and skills;

5. Other conditions specified in the corresponding special operations.

Matters needing attention

1, according to the regulations, special operators must go to the local hospitals at or above the county level for physical examination before attending the training, and those who pass the physical examination can participate in the theoretical training and practical training of safety technology corresponding to their special operations.

2. When signing up for training, you need to fill in the Application Form for Training of Special Operators, and submit three one-inch recent photos (white or blue background, you can't wear red clothes to take pictures), a copy of your ID card and a copy of your academic certificate, which will be reviewed and sealed by each unit.

References:

Network special operation certificate

G. Why should special operators be specially trained?

Because special operators undertake special tasks and greater risks in the process of labor production. When an accident happens, the right of convenience will bring great losses to the production of enterprises and the life safety of employees. Therefore, special operators must adhere to special safety technical knowledge education and safety operation technical training, and pass strict examinations. Only those who have passed the examination and obtained the safety operation certificate for special operations can work at their posts. This is an important system of enterprise safety education and an important measure to ensure safe production and prevent major casualties.

H. Contents of safety technical training and assessment management regulations for special operators

Chapter I General Provisions

Article 1 In order to standardize the safety technical training and assessment of special operators, improve the safety technical level of special operators, and prevent and reduce casualty accidents, these Provisions are formulated in accordance with the Safety Production Law, the Administrative Licensing Law and other relevant laws and administrative regulations.

Article 2 These Provisions shall apply to the safety technical training, assessment, certification, review, supervision and management of special operators in production and business units.

Where the relevant laws, administrative regulations and the State Council have other provisions on the management of special operations personnel, those provisions shall prevail.

Article 3 The term "special operations" as mentioned in these Provisions refers to operations that are prone to accidents and may cause great harm to the safety and health of operators and others as well as the safety of equipment and facilities. The scope of special operations shall be specified in the catalogue of special operations.

The term "special operations personnel" as mentioned in these Provisions refers to employees directly engaged in special operations.

Article 4 Special operators shall meet the following conditions:

(a) at least 65438 08 years of age, and not more than the national statutory retirement age;

(2) Having passed the physical examination in the community or medical institution at or above the county level, and having no diseases and physical defects such as organic heart disease, epilepsy, Meniere's disease, dizziness, hysteria, paralysis agitans, psychosis, dementia, etc. that hinder the corresponding special operations;

(3) Having a junior high school education or above;

(four) have the necessary knowledge and skills of safety technology;

(five) other conditions stipulated in the corresponding special operations.

In addition to meeting the requirements specified in Items (1), (2), (4) and (5) of the preceding paragraph, personnel engaged in special operations of hazardous chemicals shall also have a high school education or equivalent.

Article 5 Special operators must receive special safety technical training and pass the examination, and obtain the People's Republic of China (PRC) Special Operation Certificate (hereinafter referred to as the "Special Operation Certificate") before taking up their posts.

Article 6 The principles of unified supervision, graded implementation and separation of teaching and examination shall be applied to the safety technical training, assessment, certification and reexamination of special operations personnel.

Article 7 state administration of work safety (hereinafter referred to as the General Administration of Safety Supervision) shall guide and supervise the safety technical training, assessment, certification and review of special operations personnel throughout the country; The safety production supervision and management departments of the people's governments of provinces, autonomous regions and municipalities directly under the Central Government shall guide and supervise the safety technical training of special operators within their respective administrative areas, and be responsible for the assessment, certification and review of special operators within their respective administrative areas; The safety production supervision and management department of the local people's government at or above the county level shall be responsible for supervising and inspecting the safety technical training and certification of special operators within their respective administrative areas.

The State Administration of Coal Mine Safety (hereinafter referred to as the Administration of Coal Mine Safety) guides and supervises the safety technical training, assessment, certification and review of coal mine special operators (including coal mine special equipment operators); The people's governments of provinces, autonomous regions and municipalities directly under the Central Government shall be responsible for the examination and certification of coal mine special operators or designated institutions to guide and supervise the safety technical training of coal mine special operators within their respective administrative areas, and shall be responsible for the examination, certification and review of coal mine special operators within their respective administrative areas.

The people's production safety supervision and management departments of provinces, autonomous regions and municipalities directly under the Central Government and the departments or designated agencies responsible for the examination and certification of special operators in coal mines (hereinafter referred to as the examination and certification authorities) may entrust the municipal people's production safety supervision and management departments with districts and the departments or designated agencies responsible for the examination and certification of special operators in coal mines to carry out the examination, certification and review of special operators.

Article 8 Any unit or individual has the right to report illegal acts in safety technical training, examination and certification and review of special operators to the General Administration of Safety Supervision, the Coal Mine Safety Supervision Bureau, the safety production supervision and management departments of the people's governments of provinces, autonomous regions, municipalities directly under the Central Government and cities divided into districts, the departments responsible for examination and certification of special operators in coal mines or designated institutions.

Chapter II Training

Article 9 Special operators shall receive theoretical training and practical training on safety technology corresponding to their special operations.

Graduates who have obtained vocational high schools, technical schools or technical secondary schools or above are engaged in special operations corresponding to their majors. With the approval of the examination and certification authority, it can be exempted from the training of related majors.

Special operators who work across provinces, autonomous regions and municipalities directly under the Central Government may attend training at their domicile or place of employment.

Tenth safety technical training for special operations personnel, production and business units with safety training conditions should be based on independent training, can also entrust institutions with safety training conditions for training.

Production and business units that do not have safety training conditions shall entrust institutions with safety training conditions for training.

Where a production and business operation entity entrusts other institutions to conduct safety technical training for special operators, the entity shall be responsible for ensuring safety technical training.

Article 11 Institutions engaged in safety technical training for special operators (hereinafter referred to as training institutions) shall formulate corresponding training plans and teaching arrangements, and conduct safety technical training for special operators in accordance with the training program for special operators and the training program for special operators in coal mines formulated by the General Administration of Safety Supervision and the Coal Mine Safety Supervision Bureau.

Chapter III Examination and Certification

Twelfth special operations personnel assessment includes two parts: examination and audit. The examination shall be conducted by the examining and issuing authority or the unit entrusted by it; The examining and issuing authority is responsible for the examination. The General Administration of Safety Supervision and the Coal Mine Safety Supervision Bureau respectively formulate assessment standards for special operators and coal mine special operators, and establish corresponding examination question banks. The examination and certification authority or the unit entrusted by it shall conduct the examination in accordance with the examination standards uniformly formulated by the General Administration of Work Safety and the Coal Mine Safety Supervision Bureau. Article 13 The personnel who take part in the qualification examination for special operations shall fill in the examination application form, and the applicant or the unit where the applicant belongs shall apply to the examination issuing authority or its entrusted unit where the applicant's domicile or employment is located with the academic certificate or the training certificate issued by the training institution. After receiving the application, the examining and issuing authority or its entrusted unit shall organize the examination within 60 days. The special operation qualification examination includes two parts: the safety technology theory examination and the practical operation examination. Those who fail the exam are allowed to make up the exam 1 time. If the make-up exam is still unqualified, re-participate in the corresponding safety technical training. Fourteenth units entrusted by the examination and certification authority to undertake the qualification examination for special operations shall have the corresponding conditions such as places, facilities and equipment, establish corresponding management systems, and publish information such as charging standards. Fifteenth assessment and certification authority or its entrusted unit to undertake the special operation qualification examination shall publish the examination results within 10 working days after the examination. Article 16 Special operators who meet the requirements specified in Article 4 of these Provisions and pass the examination shall apply to the examination and issuing authority where their domicile or work is located, and submit copies of their ID cards, academic qualifications, physical examination certificates, examination certificates and other materials. Article 17 The examining and issuing authority that accepts the application shall complete the examination of the application materials submitted by special operators within 5 working days, and make a decision on whether to accept or not. If it can make an acceptance decision on the spot, it shall make an acceptance decision on the spot; If the application materials are incomplete or do not meet the requirements, the applicant shall be informed of all the contents that need to be corrected on the spot or within five working days. If the application materials are not informed within the time limit, it shall be deemed to have been accepted from the date of receipt of the application materials. Eighteenth of the accepted applications, the issuing authority shall complete the audit work within 20 working days. Meet the conditions, issued a special operation certificate; Do not meet the conditions, it shall explain the reasons. Nineteenth special operation certificate is valid for 6 years, and it is valid nationwide. The style, standard and number of the special operation certificate shall be uniformly stipulated by the General Administration of Safety Supervision. Article 20 If the special operation certificate is lost, a written application shall be submitted to the original issuing authority, and it shall be reissued after examination and approval by the original issuing authority. If the information recorded in the operation certificate of special operations is changed or damaged, a written application shall be submitted to the original examination and certification authority, and it shall be replaced or updated after being examined and confirmed by the original examination and certification authority.

Chapter IV Review

Article 21 The operation certificate for special operations shall be reviewed once every three years. Special operators who have been engaged in this type of work continuously for more than 10 years within the validity period of the special operation certificate, and strictly abide by the relevant laws and regulations on production safety, may extend the review time of the special operation certificate to every 6 years 1 time with the consent of the original assessment and certification authority or the assessment and certification authority of their unit. Article 22 If the special operation certificate needs to be reviewed, the applicant or the unit where the applicant belongs shall, within 60 days before the expiration, apply to the original examination and certification authority or the examination and certification authority where the applicant works, and submit the following materials: (1) a health certificate issued by a community or medical institution at or above the county level; (2) engaging in special operations; (3) Records of passing the safety training examination. If it is necessary to extend the renewal of the special operation certificate at the expiration of the validity period, it shall apply for an extension of review in accordance with the provisions of the preceding paragraph. Twenty-third special operations personnel shall participate in the necessary safety training and pass the examination before applying for the review or extension of the review of the special operation certificate. Safety training time is not less than 8 hours, mainly training laws, regulations, standards, accident cases and related new processes, technologies and equipment. Article 24 Where an application for reexamination is made, the issuing authority shall complete the reexamination within 20 working days from the date of receiving the application. Those who pass the second interview shall be signed, registered and confirmed by the examination issuing authority; Unqualified, explain the reasons. Apply for an extension of the review, after the review is qualified, the assessment and issuing authority will re-issue the special operation certificate. Twenty-fifth special operations personnel in any of the following circumstances, the review or extension of the review will not be passed: (1) the health examination is unqualified; (two) illegal operation caused serious consequences or more than two illegal acts, and verified; (three) there are illegal acts of production safety, and given administrative punishment; (four) refusing or obstructing the supervision and inspection of the safety production supervision and management department; (five) failing to participate in safety training or failing to pass the examination; (six) in accordance with the provisions of article thirtieth and article thirty-first. Article 26 If the reexamination or postponed reexamination of the operation certificate for special operations meets the conditions in Item (2), (3), (4) and (5) of Article 25 of these Provisions, the safety training examination shall be re-conducted in accordance with the provisions, and then the reexamination or postponed reexamination procedures shall be handled. If the second interview or postponed second interview is still unqualified, or the second interview is not carried out on schedule, the special operation certificate will be invalid. Twenty-seventh applicants who have objections to the review or postponement of the review may apply for administrative reconsideration or bring an administrative lawsuit according to law.

Chapter V Supervision and Administration

Twenty-eighth assessment and certification authorities or their entrusted units and their staff should be loyal to their duties, adhere to principles, be honest and self-disciplined, and conduct assessment, certification and review of special operations personnel in accordance with the provisions of laws, regulations and rules, and accept social supervision. Twenty-ninth assessment and certification authorities shall strengthen the supervision and inspection of special operations personnel, and if they find that they have the circumstances stipulated in Article 30 of these Provisions, they shall revoke the operation certificate of special operations in time; The production and business operation entities and their special operators shall give administrative punishment to the illegal acts of production safety that should be given administrative punishment according to law. The examination and certification authority shall establish a management information system for special operations personnel to facilitate the inquiry of employers and the public; Special operations personnel who cancel the operation certificate of special operations shall make a timely announcement to the public. Thirtieth in any of the following circumstances, the special operation certificate shall be revoked by the examination and issuing authority: (1) the review has not been postponed beyond the validity period of the special operation certificate; (2) The physical conditions of special operators are no longer suitable for continuing to engage in special operations; (three) responsible for the occurrence of production safety accidents; (four) the special operation certificate records false information; (5) Obtaining a special operation certificate by cheating, bribery or other improper means. Special operators who violate the provisions of items (4) and (5) of the preceding paragraph shall not apply for a special operation certificate again within 3 years. Article 31 In any of the following circumstances, the issuing authority shall cancel the operation certificate for special operations: (1) The special operations personnel are dead; (two) special operations personnel to apply for cancellation; (three) the special operation certificate has been revoked according to law. Thirty-second special operations personnel who have been away from special operations posts for more than 6 months shall re-take the practical operation examination, and can only work at their posts after being confirmed to be qualified. Article 33 The safety production supervision and management departments of the people's governments of provinces, autonomous regions and municipalities directly under the Central Government and the departments or designated institutions responsible for the examination and certification of special operators in coal mines shall report the examination and certification of special operators to the General Administration of Safety Supervision and the Coal Mine Safety Supervision Bureau respectively every year.

Thirty-fourth production and business units should strengthen the management of their own special operations personnel, establish and improve the training and review files of special operations personnel, and do a good job in the organization and daily inspection of declaration, training, assessment and review. Thirty-fifth special operations personnel change their work units after the expiration of the labor contract, and the original work units shall not detain their special operations operation certificates for any reason. Special operators who work across provinces, autonomous regions and municipalities directly under the Central Government shall accept the supervision and management of the examination and certification authorities at the place where they work. Thirty-sixth production and business units shall not print, forge or resell the special operation certificate, and shall not use the illegally printed, forged or resold special operation certificate. Special operators shall not forge, alter, lend, transfer, falsely use or use forged special operation certificates.

Chapter VI Punishment

Article 37 If the assessment and certification authority or its entrusted unit and its staff abuse their powers, neglect their duties or engage in malpractices for selfish ends in the assessment, certification and review of special operations personnel, they shall be given administrative sanctions according to law; If a crime is constituted, criminal responsibility shall be investigated according to law.

Article 38 If the production and business operation entity fails to establish and improve the files of special operators, it shall be given a warning and fined 1000 yuan.

Thirty-ninth production and business units that use special operators who have not obtained special operation certificates to work at their posts shall be ordered to make corrections within a time limit; Can be fined up to 50,000 yuan; If it fails to make corrections within the time limit, it shall be ordered to stop production and business for rectification, and a fine of 50,000 yuan to 6,543,800 yuan shall be imposed, and the directly responsible person in charge and other directly responsible personnel shall be fined 65,400 yuan to 20,000 yuan.

Coal mining enterprises that use special operators who have not obtained special operation certificates to work at their posts shall be punished in accordance with the provisions of the State Council's Special Provisions on the Prevention of Coal Mine Production Safety Accidents.

Article 40 Where a production and business operation entity illegally prints, forges or resells a special operation certificate, or uses a special operation certificate that is illegally printed, forged or resold, it shall be given a warning and fined between 654.38 million yuan and 30,000 yuan; If a crime is constituted, criminal responsibility shall be investigated according to law. Article 41 Special operators who forge, alter or use forged special operation certificates shall be given a warning and fined between 65,438 yuan and 5,000 yuan. Special operations personnel who lend, transfer or fraudulently use special operations operation certificates shall be given a warning and fined between 2,000 yuan and 65,438 yuan and 0,000 yuan.

Chapter VII Supplementary Provisions

Article 42 The charging standards for the training and examination of special operators shall be uniformly formulated by the safety production supervision and management departments of the people's governments of provinces, autonomous regions and municipalities directly under the Central Government in conjunction with the departments responsible for the examination and certification of special operators in coal mines or designated institutions, and shall be implemented after being approved by the price and finance departments of the people's governments at the same level. The certification fee shall be included in the financial budget of the same level by the examination and certification authority. Article 43 The safety production supervision and management departments of the people's governments of provinces, autonomous regions and municipalities directly under the Central Government and the departments or designated institutions responsible for the examination and certification of special operators in coal mines may formulate detailed rules for implementation in light of local conditions and report them to the General Administration of Work Safety and the Coal Mine Safety Supervision Bureau for the record. Article 44 These Provisions shall come into force on July 1 day, 2065438. 1July, 999 12 The former State Economic and Trade Commission issued the Administrative Measures for Safety Technology Training and Assessment of Special Operators (OrderNo. 10 of the former State Economic and Trade Commission. 13) shall be repealed simultaneously.